BIS FMCS 3-Year Licence Renewal: Compliance Guide for Foreign Manufacturers
Foreign manufacturers exporting products to India under the Bureau of Indian Standards (BIS) Foreign Manufacturers Certification Scheme (FMCS) can seek renewal of their licence for a longer period instead of renewing it only for one year at a time.
Schedule a Call Back
200+ BIS ISI certification assignments since 2018
Clients include Kito India, Hirotec India, N Steels, Agromach Engineering, Annapurna Agronics Machinery, Rajco Metal Industries, Vedas Cement, Sreechem Resins, Appl GOR Plastics India, Global Colours and Chemicals, Deki Electronics, Emerson Process Management (India) (12 of 150+ served since 2018).
A few more clients we've served in this industryHide the list
- Engineering and manufacturing
- Kito India · Hirotec India · N Steels · Agromach Engineering · Annapurna Agronics Machinery · Rajco Metal Industries · Vedas Cement
- Chemicals and materials
- Sreechem Resins · Appl GOR Plastics India · Global Colours and Chemicals
- Electronics and technology
- Deki Electronics · Emerson Process Management (India) · Martelx Electronics
- More clients
- Geepas India · Tegamen Safety Products · TNY Services (India) · Zeal Medical · Trans Health Care India · Agfa Healthcare India · BDS Services · AS Building Solutions · Bhimraj Industries · Indraj Beverages and Distilleries · Knotty Ventures · T Commercialization Global · Bagichi Builder Constructions · Balaji Engineering · Deshi Udyog Corporation · Finnmark India · Nexgen Brands Distributors (I) · Om Construction Company · Provevo Design · SEI Thai Electric Conductor · Amankit Pipes Manufacturing · Essem Srinisons Systems · Ganpat Udyog · IW Software Solutions
Introduction to BIS FMCS 3-Year Licence Renewal
Under the current BIS renewal framework, an FMCS licence may be considered for renewal for a period of one year up to five years, depending on the requested period, applicable fees, dues and compliance requirements. This means an eligible manufacturer can seek a 3-year FMCS licence renewal where the applicable requirements are satisfied.
A longer renewal period can reduce the administrative burden associated with repeated renewal applications. However, it does not remove the manufacturer's continuing obligations under the BIS certification framework. Production information, marking-fee reconciliation, conformity requirements and other applicable compliance obligations continue during the operative period of the licence.
For foreign manufacturers, therefore, the key question is not simply whether a 3-year renewal is available. It is whether the manufacturer can select the appropriate renewal period, submit the required information correctly, pay the applicable fees and maintain compliance throughout that period.
Update at a Glance
- BIS currently provides for FMCS licence renewal for one year up to five years.
- A 3-year renewal therefore falls within the available multi-year renewal framework.
- The renewal application is made through the BIS portal in Form XII.
- BIS states that the renewal application should preferably be submitted two months before the licence validity date.
- Since 25 February 2026, licence fees are paid on an annual basis in advance: at renewal, and then before each year's due date together with a production statement (BIS (Conformity Assessment) Amendment Regulations, 2026, regulation 8(2) and 8(10)).
- Continuing production reporting and actual marking-fee reconciliation remain relevant during the operative period of the licence.
What Has BIS Changed for FMCS Licence Renewal?
The important development for foreign manufacturers is the availability and implementation of multi-year FMCS licence renewal, rather than a framework limited to a single renewal year.
BIS's FMCS renewal page (last updated 3 February 2026) still says a licence may be considered for renewal for not less than one year and up to five years, depending on whether the fees have been paid for the requested duration. The Gazette rules changed three weeks later. Under the BIS (Conformity Assessment) Amendment Regulations, 2026 (published 25 February 2026), a licence can be renewed for a further period of up to five years, and you pay the fees every year in advance: at renewal, then before each later year's due date, with a production statement (regulation 8(2) and 8(10); Scheme-I, paragraph 8). Miss a due date and the licence is suspended for 90 days. Pay within those 90 days with a late fee of Rs.5,000 and the suspension is lifted; otherwise the licence is cancelled (regulation 8(11)). Check the first year's amount with BIS when you apply.
Therefore, a manufacturer seeking a three-year renewal can request that period as part of its renewal application, subject to the applicable BIS requirements.
This should not be described as the complete replacement of one-year renewals. The official framework continues to permit renewal periods ranging from one year to five years. The practical benefit is that eligible manufacturers can seek a longer renewal period and reduce the need for repeated annual renewal applications.
The change is best understood as greater flexibility in the renewal period, rather than an exemption from continuing BIS compliance.
What Does a 3-Year FMCS Licence Renewal Actually Mean?
A three-year renewal provides licence validity for three years, subject to the applicable BIS requirements and continuing compliance.
It does not mean that the manufacturer becomes compliance-free for three years.
During the operative period, the manufacturer may still need to:
- Submit prescribed production information.
- Maintain conformity with the applicable Indian Standard.
- Comply with the conditions attached to the BIS licence.
- Meet applicable marking-fee requirements.
- Submit production statements for actual marking-fee calculation.
- Maintain the required Performance Bank Guarantee.
- Comply with applicable surveillance, verification and other BIS requirements.
- Respond to any deficiency, clarification or compliance requirement raised by BIS.
BIS guidance specifically provides for production statements during the operative years for calculation of actual marking fees. It also states that where the actual marking fee exceeds the minimum marking fee, the difference is payable annually.
Who Can Benefit from Multi-Year FMCS Renewal?
The multi-year renewal framework is relevant to foreign manufacturers that already hold an FMCS licence and need to continue certification for their products.
It can be particularly useful for manufacturers that:
- Already hold a valid FMCS licence.
- Need continued BIS certification for products covered under the applicable Indian Standard and regulatory requirements.
- Want to request a renewal period longer than one year.
- Have the documentation and fee requirements necessary for renewal.
- Need greater certainty for long-term exports to India.
- Want to reduce the administrative burden associated with repeated renewal applications.
The approved renewal period should not be assumed solely on the basis of the manufacturer's business preference. The manufacturer must review the applicable BIS requirements, licence status, dues and documentation before selecting the renewal period.
For first-time applicants, the situation is different. A foreign manufacturer must first obtain an FMCS licence through the applicable initial certification process before dealing with renewal of an existing licence.
Legal Framework for FMCS Licence Renewal
FMCS operates under the BIS conformity-assessment framework. BIS states that the Foreign Manufacturers Certification Scheme has been operating since 2000 and is governed by the BIS Act, 2016 and the rules and regulations made under it. Under FMCS, a foreign manufacturer receives a licence to use the Standard Mark on products conforming to the applicable Indian Standard.
The principal framework includes:
- BIS Act, 2016
The BIS Act provides the broader statutory framework for standardisation, conformity assessment and the use of the Standard Mark.
- BIS (Conformity Assessment) Regulations, 2018
The regulations, as amended by the BIS (Conformity Assessment) Amendment Regulations, 2026, provide the framework governing the validity and renewal of licences. Under Scheme-I, a licence is now granted initially for up to five years and may be renewed for a further period of up to five years. The fee is paid in advance every year along with a production statement; if it is not received by the due date, the licence is suspended.
- Quality Control Orders
Where a product is covered by a mandatory Quality Control Order, the relevant BIS registration requirements must be assessed before the product is manufactured, imported or sold in India.
- FMCS Scheme-I
Foreign manufacturers seeking certification under FMCS must follow the applicable Scheme-I requirements, including renewal and continuing conformity obligations.
Continuing Compliance Requirements During a Multi-Year Renewal
A multi-year renewal should be managed as an ongoing compliance cycle rather than a one-time filing.
- Production Reporting
BIS guidance requires production statements for the calculation of actual marking fees. The production statement must be authenticated by a Chartered Accountant or Cost Accountant in accordance with the applicable requirements.
For foreign manufacturers, maintaining accurate production and dispatch records is therefore important even after the renewal application has been approved.
- Marking Fee Reconciliation
The manufacturer may be required to pay the applicable licence fee and advance minimum marking fee for the requested renewal period. However, where actual production results in a higher marking fee than the minimum amount paid, the difference may become payable in accordance with BIS requirements.
- Product Conformity
The manufacturer must continue manufacturing products in conformity with the relevant Indian Standard and the conditions of its BIS licence.
- Surveillance and Verification
Surveillance should not be presented as a mandatory renewal-stage inspection for every manufacturer.
BIS may undertake surveillance, verification or other inspection activities where required under the applicable certification framework. The frequency and scope depend on the applicable BIS requirements and circumstances of the licence.
- Self-Compliance and Other Applicable Requirements
For multi-year renewals, manufacturers should also monitor the latest BIS directions relating to self-compliance reporting, production information, fees and other operative-year requirements.
Documents Generally Required for FMCS Renewal
The exact documentation can vary according to the product, licence status, portal instructions and directions of the relevant BIS authority.
The principal documents identified by BIS for FMCS renewal include:
| Document | Purpose |
| Form XII- Renewal Application | Formal application for renewal |
| Month-wise production details | Provides production information required for renewal and marking-fee calculation |
| Complete consignee addresses | Supports verification of dispatch/consignee information |
| Extended Performance Bank Guarantee | Financial assurance as prescribed by BIS |
| Remittance of applicable marking fees | Evidence of payment of applicable fees |
BIS's current FMCS renewal page specifically identifies Form XII, month-wise production details with complete consignee addresses, an extended Performance Bank Guarantee and remittance of applicable marking fees as part of the renewal request.
Other documents may be required depending on the licence, product, compliance status or specific instructions issued by BIS. Documents such as AIR-related records, laboratory reports, existing licence information and other supporting records should therefore be treated as where required, rather than universally mandatory for every renewal.
How to Apply for BIS FMCS 3-Year Licence Renewal?
The renewal process should be approached as a compliance review followed by online submission.
Step 1: Review the Existing Licence
Check:
- Current licence validity.
- Product and scope covered by the licence.
- Outstanding dues.
- Production records.
- Marking-fee position.
- Performance Bank Guarantee.
- Any pending BIS communication or compliance issue.
Step 2: Select the Renewal Period
The manufacturer can request the appropriate renewal period within the available framework. BIS currently states that renewal may be considered for one year up to five years.
If the business requires three years of continuity, it can assess whether a 3-year renewal is appropriate based on its compliance position and fee requirements.
Step 3: Prepare Form XII and Supporting Documents
The renewal application must be prepared in Form XII with the relevant supporting information. BIS's official forms page also identifies Form XII as the "Renewal Application along with Report of Performance."
Step 4: Compile Production and Consignee Information
Month-wise production details and complete consignee addresses should be compiled accurately.
Step 5: Calculate and Pay Applicable Fees
The manufacturer should assess the applicable:
- Renewal application fee.
- Licence fee.
- Advance minimum marking fee.
- Outstanding dues, if any.
- Other applicable charges.
For a multi-year renewal, the applicable licence fee and advance minimum marking fee may be payable for the requested renewal period.
Step 6: Submit Through the BIS Portal
The renewal application is submitted through the BIS portal along with the applicable documents and fees.
BIS currently directs applicants toward online processing and has expanded online FMCS application processes through the portal.
Step 7: Respond to BIS Queries or Deficiencies
If BIS identifies a document deficiency, fee shortfall or other issue, the manufacturer should respond within the applicable timeframe and provide the required clarification or document.
Step 8: Maintain Compliance After Renewal
Once the renewal is granted, the manufacturer should continue monitoring production reporting, marking fees, conformity requirements, surveillance and other licence conditions throughout the operative period.
When Should You Apply for FMCS Licence Renewal?
BIS guidance states that the renewal application should preferably be submitted two months before the validity date.
Therefore, foreign manufacturers should not wait until the final days before expiry.
As a business-planning recommendation, starting the internal compliance review around three months before expiry can provide additional time to:
- Identify outstanding documents.
- Check production records.
- Review fee and marking-fee calculations.
- Verify the Performance Bank Guarantee.
- Resolve outstanding BIS issues.
- Prepare the Form XII application.
- Submit the renewal application in time.
The three-month recommendation is a conservative compliance-planning recommendation, not an official BIS processing timeline.
BIS FMCS Renewal Fees for a 3-Year Licence
The total cost of renewal depends on the applicable product and the renewal period selected.
A manufacturer requesting a three-year renewal should assess the following:
| Fee/Payment | Treatment |
| Renewal application fee | Applicable as prescribed by BIS |
| Licence fee | Paid every year in advance (at renewal, then before each year's due date) |
| Advance minimum marking fee | Paid every year in advance (at renewal, then before each year's due date) |
| Actual marking fee | Reconciled against actual production where applicable |
| Outstanding dues | Payable where applicable |
| Other applicable charges | Depending on the case |
BIS's FMCS renewal page states that the application fee, licence fee and advance minimum marking fee, along with applicable dues, are considered for the requested renewal duration. Since the BIS (Conformity Assessment) Amendment Regulations, 2026, however, the fee is paid in advance on an annual basis, at renewal and for each later year of the licence, together with a production statement. Confirm on the BIS portal what is payable for the period you request.
This means the cost structure should not be described simply as a "3-year renewal fee." Manufacturers should assess the complete fee requirement for the requested period and reconcile actual marking fees as required.
Benefits and Compliance Risks of a Multi-Year Renewal
A three-year renewal can provide meaningful operational benefits, but it also requires disciplined compliance management.
- Reduced renewal frequency: The manufacturer does not need to prepare a fresh renewal application every year when a longer renewal period has been granted.
- Better business planning: Longer licence validity can provide greater certainty for India-bound production and export planning.
- Lower administrative burden: The business can reduce the repetitive paperwork associated with frequent renewal applications.
- Improved compliance planning: A multi-year licence allows the manufacturer to create a structured compliance calendar covering the entire operative period.
- Greater continuity: Maintaining a valid licence for a longer period can help businesses plan their India market operations more efficiently.
Compliance Risks
The benefits can be lost if the manufacturer treats the three-year renewal as a one-time compliance exercise.
Common risks include:
- Failure to submit required production information.
- Incorrect production or consignee data.
- Non-payment or underpayment of applicable fees.
- Failure to reconcile actual marking fees.
- Expiry or inadequacy of the Performance Bank Guarantee.
- Failure to respond to BIS communications.
- Product non-conformity.
- Failure to comply with surveillance or verification requirements.
- Continuing to use the Standard Mark when the licence is suspended or otherwise not valid.
Suspension and Cancellation Risks
Non-compliance with BIS requirements can have serious consequences.
However, the consequence should not be presented as automatic for every violation. Depending on the nature of the issue and the applicable BIS procedure:
- Missing required production information may lead to compliance or suspension proceedings.
- Non-payment of applicable dues may lead to suspension or cancellation.
- Continued product non-conformity may affect the continuation of the licence.
- Continued use of the Standard Mark during suspension may invite action under applicable BIS law.
- Failure to maintain required documentation or guarantees may delay or affect renewal/continuation.
The exact consequence depends on the nature of the violation, the status of the licence and the action taken by BIS.
For this reason, manufacturers should maintain an internal or outsourced FMCS compliance calendar throughout the entire renewal period.
Common Mistakes Foreign Manufacturers Should Avoid
- Treating a 3-Year Licence as Compliance-Free: A longer validity period does not eliminate operative-year compliance obligations.
- Using the Wrong Renewal Form: The current BIS FMCS renewal page identifies Form XII for renewal. Manufacturers should use the latest form and portal requirements rather than relying on outdated form numbers.
- Ignoring Production Reporting: Production data is important for marking-fee calculation and continuing compliance.
- Assuming All Fees Are Paid Once: The manufacturer should distinguish between advance minimum marking fees and actual marking-fee reconciliation.
- Filing Too Close to Expiry: BIS recommends submitting the renewal application preferably two months before the validity date.
- Assuming Inspection Is Mandatory in Every Renewal: Surveillance or verification may be conducted where required, but it should not be described as a mandatory sequential stage for every renewal case.
- Failing to Monitor the Licence Scope: Manufacturers should ensure that their products, varieties and manufacturing details remain aligned with the approved licence scope.
How Corpseed Can Help with BIS FMCS Renewal
A multi-year FMCS renewal can reduce repetitive administrative work, but the manufacturer still needs to manage the licence throughout its operative period.
Corpseed can support foreign manufacturers with:
- FMCS licence compliance review.
- Renewal-period assessment.
- Form XII preparation.
- Production and consignee data compilation.
- Fee assessment and payment coordination.
- Performance Bank Guarantee documentation.
- BIS portal filing support.
- Response to documentation deficiencies.
- Ongoing production and marking-fee compliance tracking.
- Surveillance and regulatory coordination, where applicable.
- General FMCS compliance management.
For overseas manufacturers, professional support can also help coordinate information between the foreign manufacturing facility, Authorized Indian Representative and Indian compliance team.
Conclusion
BIS FMCS multi-year renewal provides foreign manufacturers with greater flexibility in managing their certification lifecycle. Under the current BIS framework, an FMCS licence may be considered for renewal for one year up to five years, making a three-year renewal a practical option within the available renewal structure.
However, extended licence validity does not remove continuing production-reporting, marking-fee, conformity, surveillance and other applicable compliance obligations. Manufacturers should select the appropriate renewal period, clear outstanding dues and compliance issues, prepare Form XII and supporting documents accurately, and maintain an operative-year compliance calendar after renewal.
For foreign manufacturers exporting certified products to India, the objective should therefore be more than simply obtaining a three-year licence. The priority should be maintaining that licence without interruption throughout its validity.
Corpseed can assist foreign manufacturers with FMCS renewal preparation, documentation, portal filing, fee assessment and ongoing compliance management, helping businesses maintain their BIS certification and continue accessing the Indian market with greater confidence.
About the Author

Anshika Jindal
Content WriterAnshika Jindal, a Legal Content Writer with strong expertise in legal research and a solid academic background in BA LLB and LLM (Criminal Law). I specialize in researching statutes, case laws, and legal developments and presenting them in clear, accurate, and engaging written content. With strong analytical skills and attention to detail, I create reliable, well-structured legal content while maintaining professional and ethical standards.
I specialize in conducting in-depth legal research using credible sources and presenting legal information in a structured, reader-friendly manner while maintaining precision and authenticity. My work focuses on simplifying legal language without compromising its meaning, making legal content accessible to a wider audience.
Related articles

BIS Hallmarking Centre Setup Scheme 2026-31
2026-11-02

BIS Establishes Three New Indian Standards for Electric Cycles, Therapeutic Footwear and EV Charging Cables
2026-10-19

Importing Toys into India: BIS Toy Certification & Battery EPR Requirements
2026-10-19

BIS Notifies 33 New and Revised Indian Standards in October 2026: Compliance Guide
2026-10-16

BIS Certification for Electrical Appliances: 2026 Guide for Manufacturers & Importers
2026-10-14

BIS Solar PV Module Model Number Update: New MNRE SOP and Registration Requirements
2026-10-09

