India Plans 5-8 More Semiconductor Facilities under Semicon Expansion
India plans five to eight additional semiconductor facilities as Semicon 2.0 expands support for fabs, packaging, suppliers, research and talent.
Schedule a Call Back
India plans to set up five to eight more semiconductor facilities over the next seven to eight years. The expansion under Semicon 2.0 is aimed at building capacity across chip manufacturing, packaging, design, materials, research and skilled manpower.
India has entered the next stage of its semiconductor journey. In his Independence Day address from the Red Fort on 15 August 2026, Prime Minister Narendra Modi said the country expects to establish five to eight more semiconductor facilities over the next seven to eight years.
The announcement follows visible progress under the first Semicon India Programme. Twelve semiconductor projects have received government approval, representing cumulative proposed investment of more than Rs 1.64 lakh crore. Three facilities operated by Micron, Kaynes Semicon and CG Semi have started commercial production.
The new target is significant, but it is not yet a list of sanctioned projects. The government has not identified the companies, locations, technologies, investment values or production capacities of the proposed five-to-eight facilities. It is also unclear how many will be front-end wafer fabrication plants and how many will undertake assembly, packaging and testing.
That distinction is important. A fabrication plant creates electronic circuits on a wafer. An ATMP or OSAT facility assembles, packages and tests semiconductor dies so that they can be used in electronic products. Both are essential, but their investment, infrastructure, technical complexity and business models are different.
Why This Was Implemented
Semiconductors power phones, cars, telecom networks, medical devices, factories, renewable-energy systems, defence equipment and data centres. Yet their production is concentrated in a few international hubs. The shortages experienced during the pandemic showed how disruption at one overseas plant could delay vehicle production, raise electronics costs and interrupt industrial supply chains worldwide.
India also has a growing electronics-manufacturing base but continues to import many high-value components. Phones, computers, appliances, vehicles and telecom products may be assembled in India while their most valuable chips come from abroad. Domestic semiconductor capacity is intended to retain more value within the country and reduce exposure to external supply shocks.
The policy has three connected goals. The first is economic: attract high-value manufacturing, investment and skilled employment. The second is strategic: improve access to components used in communications, energy, transport, defence and digital infrastructure. The third is technological: connect Indiaâs existing chip-design talent with fabrication, packaging, materials, research and product development.
The five-to-eight-facility target also signals policy continuity. Semiconductor projects require large investments and long payback periods. Companies are more willing to consider India when they believe incentives, infrastructure support and workforce development will remain available beyond the first group of approved plants.
The Regulatory Framework
Indiaâs semiconductor policy is primarily an incentive, approval and ecosystem-development framework. It is not a single law imposing new semiconductor compliance duties on every business.
The first Semicon India Programme was approved in December 2021 with an outlay of Rs 76,000 crore. It created support schemes for silicon and display fabs, compound-semiconductor and sensor facilities, ATMP/OSAT units and semiconductor design. The India Semiconductor Mission, operating under the Ministry of Electronics and Information Technology, became the nodal body for evaluating and recommending projects.
For eligible silicon and display fabs, the original framework provided fiscal support of up to 50% of project cost on a pari-passu basis, subject to scheme conditions and approval. State governments could offer additional assistance through land, infrastructure, power concessions or other incentives. Different support conditions applied to packaging, compound-semiconductor and design projects.
The Union Cabinet approved Semicon 2.0 on 15 July 2026 with an outlay of Rs 1, 27,500 crore. The programme is organised around six pillars:
- Chip design and Indian semiconductor intellectual property.
- Semiconductor machinery, materials, chemicals and gases.
- Additional silicon, compound-semiconductor, discrete-component and display fabs.
- Stronger ATMP, OSAT and advanced-packaging capacity.
- Research and development, including more advanced technologies.
- Talent development for design, clean rooms, fab construction and manufacturing.
Businesses receiving incentives must also follow the ordinary legal requirements applicable to their activity. Depending on the project, these may include company and tax registrations, land and building approvals, environmental permissions, factory and labour requirements, import and customs procedures, hazardous-material controls, electricity and water permissions, fire safety, contractual obligations and scheme-specific reporting.
What Has Changed
Semicon 1.0 was mainly about getting semiconductor manufacturing projects off the ground in India. Semicon 2.0 takes that effort further by looking at the wider ecosystem. Along with fabs and packaging, the focus now includes local suppliers, advanced technology, research and the skilled workforce needed to support the industry.
1. Greater Focus on Machinery and Materials
Semicon 2.0 formally expands support to the machinery and materials needed for semiconductor manufacturing. This includes ultra-pure gases, chemicals, wafers, substrates, filters, pumps, valves, ceramics, clean-room systems and precision components. Developing these suppliers in India can increase domestic value addition and reduce dependence on imports and overseas supply chains.
2. Stronger Push for Advanced Packaging
The programme gives greater attention to advanced semiconductor packaging. Modern packaging can bring multiple dies and memory components closer together, improving speed, power efficiency and overall chip performance. This is particularly relevant for artificial intelligence, automobiles, communications and high-performance computing.
3. Wider Technology Roadmap
Indiaâs current fab strategy includes commercially important 28â110 nanometre technologies. Semicon 2.0 extends the technology roadmap by supporting research and development aimed at more advanced semiconductor nodes and technologies. Collaboration with Indian and international research institutions is expected to play an important role in this effort.
4. Broader Definition of Semiconductor Talent
The focus on talent also goes beyond chip designers and researchers. The ecosystem requires clean-room technicians, process engineers, equipment specialists, construction teams, quality professionals and trained factory operators. Developing this wider workforce will be important for operating and scaling semiconductor facilities in India.
Implementation Timeline and Norms
The proposed five to eight facilities are expected to be developed over a seven to eight-year period. However, there is no fixed commissioning date for each project. Every facility will move through several stages before commercial production begins.
The process usually starts with a business proposal covering technology, investment, location, financing and expected demand. Where needed, the applicant may also need a technology partner with relevant semiconductor experience.
Government approval is only the beginning. Companies still need to arrange funding, secure land and approvals, complete engineering work, appoint contractors and order specialised equipment.
Once construction is complete, equipment is installed and the production process is tested. Workers are trained, pilot production begins, and samples are tested by customers. Commercial production starts after the process meets quality and performance requirements, followed by a gradual increase in output.
| Stage | What it means |
| Announcement or MoU | Intention to explore or develop a project |
| Government approval | Project accepted under the relevant policy or incentive route |
| Under construction | Civil work, utilities or plant development underway |
| Pilot production | Trial output used to stabilise processes and qualify products |
| Commercial production | Regular output and shipments for paying customers |
| Capacity ramp-up | Production volume and utilisation increasing over time |
As of 17 August 2026, India has 12 approved projects, three commercially operating facilities and a separate target of five to eight additional facilities. These categories should not be combined.
Three Facilities Have Started Commercial Production
Indiaâs first three commercial units under the programme are located in Sanand, Gujarat. All three focus on back-end assembly, packaging or testing rather than front-end wafer fabrication.
Micron Technology opened its semiconductor assembly and test facility on 28 February 2026. It receives advanced DRAM and NAND wafers from Micronâs international network and converts them into finished memory and storage products. Micron and its government partners are investing approximately US$2.75 billion. The company expects to assemble and test tens of millions of chips in 2026 and scale to hundreds of millions in 2027. Its first shipment went to Dell Technologies for laptops made and sold in India.
Kaynes Semicon began commercial operations at its OSAT facility on 31 March 2026. The approved investment is Rs 3,307 crore with announced capacity of more than 6.3 million units per day at full scale. The plant is intended to serve automotive, industrial and consumer-electronics applications. Its early output included intelligent power modules, which combine multiple semiconductor dies in one package.
CG Semi started commercial production at its G1 OSAT unit on 4 July 2026. The company is a joint venture involving CG Power, Japanâs Renesas Electronics, and Thailandâs Stars Microelectronics. G1 has peak capacity of up to 300 million units annually. CG Semi is investing more than Rs 7,600 crore across G1 and a larger G2 facility that remains under development.
These operations are important because fabricated dies cannot be placed directly into a vehicle, phone or machine. They must be assembled, connected, protected and tested. India is gaining practical manufacturing experience through these plants, although its first approved commercial silicon fab is scheduled for commissioning later.
What Could the New Facilities Manufacture?
The technologies for the proposed facilities have not been announced. Semicon 2.0 indicates several possible categories.
- Silicon wafer fabs create circuits on silicon wafers through processes such as deposition, lithography, etching and implantation. Mature-node chips remain widely used in vehicles, industrial systems, power management, telecom products and appliances, even though they are not the smallest nodes used in flagship processors.
- Compound-semiconductor fabs work with materials such as silicon carbide and gallium nitride. Silicon carbide is useful for efficient high-voltage power conversion, while gallium nitride performs well in high-frequency and power applications. Potential markets include EVs, charging, renewable energy, telecom and industrial equipment.
- ATMP and OSAT units perform assembly, testing, marking and packaging. They can begin operation faster than major wafer fabs and offer a practical entry into manufacturing. The longer-term opportunity lies in moving towards higher-value advanced packages and locally developed processes.
Other possibilities include display-driver chips, sensors, micro-electromechanical systems, power devices, memory packaging and Mini/Micro-LED technologies. These remain policy possibilities rather than confirmed descriptions of the new facilities.
Impact on Businesses
The expansion will affect more than companies that make semiconductor chips. Businesses in electronics, automobiles, telecommunications, energy and industrial manufacturing could get better access to suppliers in India. Local supply chains may also reduce dependence on overseas sources, make delivery times more predictable and make it easier for companies to work with chip suppliers during product development.
For small and medium-sized enterprises, the opportunity may appear in supporting activities rather than chip fabrication. Plants need precision components, clean-room consumables, automation, maintenance, testing, water treatment, safety systems, logistics and workforce services. Suppliers that meet semiconductor-grade quality standards can enter a specialised market with long customer relationships.
The impact will not be uniformly positive or immediate. Customers will not switch to a local chip only because it is made in India. The product must meet performance, reliability, security, volume and price requirements. Automotive and industrial customers may require lengthy qualification. Suppliers may have to invest before they know whether they will win recurring orders.
Businesses located near emerging clusters may experience higher demand for land, utilities, construction and skilled employees. This can create growth, but it can also raise operating costs. Companies should assess the programme based on their actual position in the value chain rather than assuming every electronics business will receive an incentive.
How Businesses Will Achieve Compliance
There is no single âsemiconductor compliance certificateâ. Requirements depend on whether a business is building a fab, supplying materials, importing equipment, operating a packaging unit or applying for government support.
1. Define the Project Correctly
The company should identify whether the proposal is a silicon fab, compound-semiconductor unit, discrete-device plant, display facility, ATMP/OSAT unit, design project, equipment operation or materials business. The category determines the applicable scheme, technical evaluation and incentive conditions.
2. Build a Documented Business and Technology Plan
Applicants should provide clear details about their investment, funding, technology, production capacity, products and expected demand. They should also explain their implementation plans and management experience. Financial and production estimates should be based on realistic assumptions, not presented as fixed or guaranteed results.
3. Secure Technology and Financial Capability
A project must show access to the process technology, equipment and experienced personnel needed to operate. It must also demonstrate financial closure or a realistic funding plan. Government support generally shares eligible cost, it does not replace the promoterâs responsibility to finance and execute the project.
4. Coordinate Central and State Approvals
Land, construction, electricity, water, environment, factories, labour, fire safety and local-development permissions may come from different authorities. A compliance matrix should list each approval, responsible team, supporting document, dependency and renewal date.
5. Manage Environment, Safety and Chemicals
Semiconductor operations may use speciality gases, chemicals and high-purity water. Businesses must identify applicable environmental approvals, waste-management obligations, emergency systems, employee-safety procedures and transport or storage controls. Water sourcing, recycling and discharge should be addressed before operation begins.
6. Manage Imports and Supply Chains
Semiconductor units will need to bring in equipment, parts and materials, particularly while setting up the plant. Before placing orders, businesses should check the applicable customs duties, exemptions, import rules and paperwork. Companies selling abroad will also have to look at the trade rules of the countries they supply.
7. Keep Track of the Project
Businesses taking government support will have to keep their project records in order. This includes bills, contracts, investment details and documents showing that the project is moving as approved. If there is a major change in the project, such as its location, ownership, technology or capacity, the company should check the scheme conditions before making the change.
8. Meet Customer Requirements
Getting government approval does not automatically mean customers will buy the product. Semiconductor buyers usually have their own checks for quality, testing and reliability. Companies supplying the automobile, aerospace or defence sectors may have to meet additional customer requirements before their products are accepted.
Benefits for Businesses
Semicon 2.0 could open up opportunities for more businesses as India expands its semiconductor industry. The benefits are not limited to chip manufacturers. Equipment and material suppliers, electronics companies, technology businesses and skilled workers could also see new opportunities as more projects are developed.
- Lower entry barriers: Fiscal support, state incentives and infrastructure assistance can make large semiconductor projects more financially viable.
- Stronger business clusters: As more plants come up in one region, suppliers, logistics companies, training centres and service providers can develop around them, improving access and reducing delays.
- Opportunities for design companies: Chip design firms can benefit from better access to prototyping, packaging facilities and potential Indian customers.
- Growth for Indian suppliers: Local machinery and material companies can use domestic semiconductor projects as reference customers before expanding into global markets.
- More jobs and skills: The ecosystem will need engineers, technicians, operators, construction teams, quality professionals, environmental specialists and supply-chain workers.
These benefits will build over time. Domestic suppliers must first prove their quality and reliability, while large projects need stable production before the wider ecosystem benefits become visible.
Right Decision or Additional Burden?
The policy direction is reasonable because semiconductors are strategically important and require very high upfront investment. However, public support must be balanced with strong execution, clear milestones and measurable results.
| Aspect | What It Means |
| Why support is needed | High capital costs make semiconductor projects difficult to establish without government support. |
| Main risk | Projects may face delays, low utilisation, weak yields, changing technology or limited customer demand. |
| Compliance challenge | Multiple approvals and unclear timelines can increase the burden for investors. |
| Need for coordination | Environmental and safety standards should remain strict, but approvals should be predictable and well-coordinated. |
| How success should be measured | Commercial shipments, production yields, customer approvals, domestic value addition, exports, skilled jobs and follow-on private investment. |
| Overall view | Public support is justified, but incentives should build competitive capability rather than create long-term dependence. |
The policy should be measured by what the projects actually deliver, not just by the investment announced or the number of factories planned. Key indicators should include commercial production, product quality, customer approvals, local sourcing, exports, skilled jobs and further private investment.
Government support has a role to play, especially in the early stages. At the same time, projects need to meet their targets and become commercially viable. The long-term goal should be to build a strong semiconductor industry that can compete on its own.
Business Opportunities Created
The most visible opportunity is manufacturing, including silicon fabs, compound semiconductors, discrete power devices, ATMP/OSAT and advanced packaging. The wider ecosystem may create equally important openings.
- Equipment and precision engineering: Plants need clean-room systems, gas-handling equipment, pumps, valves, filters, automation, robotics, inspection tools and precisely manufactured parts. Indian engineering firms may begin with components, maintenance or refurbishment before moving into advanced equipment.
- Materials and consumables: Opportunities include industrial and ultra-pure gases, chemicals, substrates, ceramics, packaging materials, adhesives and specialised cleaning supplies. Qualification can be lengthy because small variations may affect yield.
- Infrastructure and environmental services: Semiconductor sites need reliable power, water treatment, wastewater recycling, clean-room construction, fire protection and continuous monitoring. Engineering and environmental firms can develop semiconductor-specific expertise.
- Testing, laboratories and certification: Independent reliability testing, failure analysis, calibration and material-characterisation services can support manufacturers and customers.
- Chip design and intellectual property: India has a large design workforce. The larger opportunity is for Indian companies to own products and intellectual property, complete successful tape-outs and win recurring orders.
- Training and recruitment: Universities, institutes and training providers can create programmes for process engineering, equipment maintenance, clean-room behaviour, packaging, quality and safety.
- Sector-specific products: Automotive and EV businesses need power and control devices. Telecom and industrial users require radio-frequency, sensor and mature-node chips. Renewable-energy systems use power semiconductors. Defence and space programmes need secure, traceable components.
Opportunity does not guarantee easy entry. Businesses should identify a narrow capability, understand customer qualification and invest in quality systems before committing large capital.
Where Semiconductor Clusters Are Emerging
Gujarat has the largest concentration. Sanand hosts Micron, Kaynes Semicon and CG Semi. Dholera is the location of Tata Electronicsâ planned silicon fab and Crystal Matrixâs approved gallium-nitride Mini/Micro-LED project. Suchi Semicon has approval for an OSAT unit in Surat.
Other projects extend the map. Tata Electronics is developing an assembly and test unit in Assam. Uttar Pradesh has the Vama Sundari InvestmentsâFoxconn display-driver packaging project. Odisha has projects from 3D Glass Solutions and SiCSem. CDIL is expanding in Punjab, while Advanced System in Package Technologies has an approved unit in Andhra Pradesh.
Future semiconductor projects will look at more than financial incentives when choosing a location. Land, steady power, reliable water supply, transport, skilled workers, nearby universities, customers and local suppliers will all matter. States that can provide these facilities may have a better chance of attracting long-term investment.
Talent, Infrastructure and Environmental Challenges
India already has a large pool of people working in chip design, but running a semiconductor plant requires a different set of skills. Companies will need process engineers, equipment technicians, clean-room workers, safety professionals, quality teams, and production managers. Training in classrooms can help, but much of the practical knowledge comes from working in actual plants.
Government data released in July 2026 said that about 68,000 students had been trained on electronic design automation tools. The next step is to provide more hands-on training in chip manufacturing, packaging, equipment maintenance and plant operations.
Infrastructure must meet demanding standards. A brief power interruption, contaminated material or small process variation can reduce yield the share of products that meet specification. Fabs require ultra-pure water, while packaging plants also need controlled environments, water and chemicals.
Projects should publish credible plans for water sourcing, recycling, waste treatment and energy use. Environmental management is not separate from manufacturing performance, efficient systems can reduce cost, community risk and customer concern.
Can India Compete With Established Semiconductor Hubs?
India enters a market shaped by decades of experience. Taiwan and South Korea have dense networks of fabs, suppliers and customers. Japan is strong in materials and equipment. The United States leads in several areas of design, intellectual property and production tools. China has invested heavily in domestic capacity, while the European Union is supporting manufacturing and research.
Indiaâs advantages include its engineering base, growing electronics market, design talent and willingness to support investment. It can also serve companies seeking to diversify production geographically.
India still has some gaps to address. The country has limited experience in running high-volume chip plants and continues to rely on imported equipment and materials. Many local suppliers are also at an early stage. A practical approach would be to build on areas such as chip packaging, mature-node chips, power devices, compound semiconductors and chip design, while gradually developing more local manufacturing capabilities.
Corpseedâs Core Message
Indiaâs semiconductor expansion creates opportunities, but successful participation will require more than an attractive project idea. Businesses must connect commercial planning with regulatory execution from the beginning.
The first step is to identify the correct project category and incentive route. The next is to prepare a credible technology, finance and implementation plan. Central approvals, state incentives, land, environment, construction, factory, labour, import and operational requirements should then be placed on one coordinated timeline.
Corpseedâs core message is simple: treat compliance as part of project design, not as paperwork to be completed after investment decisions are made. Early regulatory mapping can expose missing approvals, unrealistic timelines and cost assumptions before they become expensive problems.
Businesses should also avoid pursuing incentives without a sustainable market. A semiconductor or supplier project needs technology access, capable management, customer demand and long-term funding. Incentives can support a sound business model, but they cannot repair a weak one.
For companies entering this ecosystem, the right approach is structured and evidence-based: understand eligibility, document the project, coordinate approvals, build quality systems and prepare for ongoing reporting and customer qualification.
Outlook
During the next two to three years, attention should shift from broad announcements to project-level evidence. Important indicators will include named companies, formal approvals, financial closure, technology partnerships, construction progress, equipment orders, pilot output and commercial shipments.
The first three operating facilities will provide another test. Their output growth, customer wins, exports and local sourcing will show whether public support is producing competitive manufacturing.
Indiaâs semiconductor ambition is credible, but the outcome will depend on execution. The country will be judged not by the number of plants announced, but by what they produce, how reliably they operate and how much value they create within India.
Key Takeaways
- India has 12 approved projects, but only three had started commercial production by 17 August 2026.
- Semicon 2.0 expands support from individual plants to design, equipment, materials, research, packaging and talent.
- Businesses must treat incentive eligibility, statutory approvals, project execution and customer qualification as connected work streams.
- The policy creates opportunities for manufacturers, suppliers, engineers, laboratories, infrastructure firms and training providers.
- Success will depend on production, customers, yields and local value not announcement numbers alone.
About the Author

Parul Bohral
Legal Content WriterParul Bohral, a BALLB graduate and experienced legal researcher and content writer with expertise in various legal areas, including corporate law and intellectual property. I have gained valuable experience in esteemed legal environments, where I have strengthened my research skills, allowing me to approach legal writing with precision and depth.
As a legal content writer, I am committed to delivering work that not only informs but also engages readers. By staying informed about the latest trends in content marketing and regulatory developments, I ensure that my writing remains sophisticated and meets industry standards. My dedication to thorough research enables me to craft content that is both insightful and impactful.
