Introduction: BEE Registration for Diesel Engine Driven Monoset Pump for Agricultural Purposes
Monoset Pumps are one of the most commonly used agricultural equipment due to their inexpensive cost, ease of manufacture, and ease of maintenance.
The advantage of a Monoset pump is that the pump is installed on the prime mover's extended shaft, i.e., the pump and prime mover are mounted on the same shaft, which is why this configuration is known as a monoset pump.
This pump is likewise a centrifuge, but it has the advantage of being more efficient and requiring less maintenance than a connected centrifuge since mechanical transmission loss due to coupling is avoided, and there is no risk of non-alignment.
Table of Contents
- Introduction: BEE Registration for Diesel Engine Driven Monoset Pump for Agricultural Purposes
- What Is The Importance of BEE?
- What Does The Star Rating Mean?
- BEE Registration Process
- Validity for BEE Registration
- Sample Label and Labelling Period
- Corpseed Role in The Certification Process
What Is The Importance of BEE?
The main objective of the BEE star labeling scheme is to ensure that the end consumers of India get high-energy efficiency products.
In May 2006, the Minister of Power launched a star labeling program to make electrical appliances more energy efficient. Under the province of this scheme, total of 30 products are covered. From which 10 are covered under mandatory scheme and 20 under a voluntary scheme.
Mandatory Product List
Voluntary Product List
What Does The Star Rating Mean?
Any buyer willing to buy a BEE registered product can identify the product's energy efficiency just by looking at the number of stars the label on the product has. More the stars, the more energy-efficient is the product and the more electricity it will save.
A 5 star rated product has the highest efficiency and the 1 star rated product has the lowest efficiency.
The star label acts as an energy efficiency guide for the end consumer or buyer. However, in the market, the price of the 5 star rated products is on the high side as compared to the 1 star or 2 star rated products. But in the long term, the high efficient product saves you more money on your electricity bills.
BEE Registration Process
The entire BEE registration process is categorized into three major steps, which include online fillings and hardcopy submission. The entire lifecycle of getting your product registered with BEE involves company registration followed by product testing and model approval. Below is a brief description of the process involved in each step of registration.
Company Registration: The very first step of star labeling registration is to get the company registered with the BEE on their online portal. Any manufacturer/importer/trader who wishes to apply under the scheme has to undergo this step. The registration process involves the submission of mandatory documents and details of the applicant. Documents such as ISO 9001, Trademark, COI, Authorisation letter, etc. are required to be uploaded at the time of online filling. Also, the applicant needs to submit the hardcopy originals to the Bureau of Energy office.
Apart from the online filling, the applicant needs to pay a fee of 1, 00,000/- (If the applicant is a large scale industry) or 25,000/- (If the applicant is an MSME).
Testing: Once the company registration application is approved by the bureau, the applicant receives login credentials for his portal over the registered email ID. Using the same the applicant can fill out the model registration application. However, before proceeding with the model registration process, the applicant needs to get his products tested from a NABL accredited lab or from an ILAC MRA lab. The test report must be as per the BEE-defined format and must consist of all the testing parameters. For product testing, the applicant needs to share the testing documents along with the product sample as prescribed by the testing facility. Also, before applying for the model registration, it must be cross-checked that the LAB reports issue date is not greater than 90 days.
Model Registration: Once the testing is complete, the applicant can now apply for model registration on the online BEE portal. The registration requires mandatory documents in a specified format along with the test report (not older than 90 days). Once all the documents and details are uploaded online along with a sample label. A fee of INR 2000 is to be paid to the bureau.
Once the application is submitted online, all the hardcopy originals along with the online application and payment receipt are too submitted to the department.
The department scrutinizes all the submitted and received documents to provide the final license to the applicant.
Validity for BEE Registration
The BEE validity is dependent upon the labeling period which is released by the bureau. For example, the current labeling period for Variable Air Conditioner is 1st January 2021 to 31st December 2023, hence before 31st December 2023, the applicant has two options, either to degrade its star rating or to renew the same star rating as per the newly released table by making necessary changes in their product and enhance its efficiency.
Sample Label and Labelling Period
Energy efficiency labels are mandatory labels affixed to a registered product, describing its energy efficiency and consumption. A star rating, ranging from 1 to 5 in the ascending order of energy efficiency is provided to the permitted and products registered with the Bureau.
A label period is a duration prescribed by BEE for which the star rating of a product is valid. When the label period for a particular product is revised by the department, the star rating calculation table and energy performance criteria for the product are also upgraded.
E-Waste certificate is required for extending product shelf life for its originally supposed use and distribute constant within the market or returning to the owner. Enjoy simple processing, fast updates, and, best of all, no hidden fees.
Business visibility and its uniqueness make it differ from crowd where most of business entity prefer to go for mark, design or logo to get registered on its name. Required trademark registration, get expert hand to make it possible.
The Bureau of Energy Efficiency (BEE) was established by the Government of India pursuant to the provisions of the Energy Conservation Act 2001 on 1 March 2002.
This portion of the site is for informational purposes only. The content is not legal advice. The statements and opinions are the expression of author, not corpseed, and have not been evaluated by corpseed for accuracy, completeness, or changes in the law.
BOOK A FREE CONSULTATION
Get help from an experienced legal adviser. Schedule your consultation at a time that works for you and it's absolutely FREE.