TEC Revised Standard 2026 for 2.4 GHz, 5 GHz and 6 GHz Equipment: New Requirements and 90-Day Transition
Quick note
Below is the official summary and the reference document preview. Use βOpen PDFβ for full screen view.
Schedule a Call Back
Summary
The Department of Telecommunications (DoT) has notified a revised technical standard for equipment operating in the 2.4 GHz, 5 GHz and 6 GHz frequency bands. The notification, S.O. 6180(E), was issued on 9 November 2026 and published in the Official Gazette on 12 November 2026.
The revised standard, TEC59432610 Essential Requirements, came into effect on the date of Gazette publication. However, the government has allowed the existing and revised standards to remain applicable together for 90 days. Once this period ends, only the revised standard will apply.
This development is relevant to manufacturers, importers and suppliers dealing with equipment covered by the standard. Businesses should examine the updated requirements, check their existing TEC certification status and determine whether any changes are needed in their product testing or compliance documentation. The notification does not automatically require every existing product to obtain a new certificate.
TEC Notification November 2026 at a Glance
The Ministry of Communications has issued this notification under the Telecommunications Act, 2023 and the Telecommunications (Framework to Notify Standards, Conformity Assessment and Certification) Rules, 2025.
The important details are provided below.
| Particulars | Details |
|---|---|
| Issuing Ministry | Ministry of Communications |
| Department | Department of Telecommunications (DoT) |
| Technical Authority | Telecommunication Engineering Centre (TEC) |
| Notification Number | S.O. 6180(E) |
| Notification Date | 9 November 2026 |
| Gazette Publication Date | 12 November 2026 |
| Revised Standard | TEC59432610 Essential Requirements |
| Equipment Category | Equipment operating in 2.4 GHz, 5 GHz and 6 GHz bands |
| Governing Act | Telecommunications Act, 2023 |
| Applicable Rules | Telecommunications (Framework to Notify Standards, Conformity Assessment and Certification) Rules, 2025 |
| Effective Date | 12 November 2026 |
| Transition Period | 90 days from Gazette publication |
| Main Development | Revised standard notified with concurrent application of the existing standard |
| Position After Transition | Only the revised standard will apply |
The Gazette establishes the revised standard and its transition period. Product-specific technical requirements and certification procedures must be checked against the applicable TEC documents and regulatory instructions.
What Is the Regulatory Framework Behind the TEC Revised Standard 2026?
Telecommunication equipment used in India may be subject to technical standards notified by the government. These standards help establish the requirements that covered equipment must satisfy.
The Telecommunication Engineering Centre develops and maintains technical standards and carries out functions relating to conformity assessment and telecom equipment certification.
The November 2026 notification has been issued under two legal provisions.
Section 19 of the Telecommunications Act, 2023
Section 19 provides the legal basis for notifying standards and conformity-assessment measures relating to telecommunications.
These may concern equipment specifications, technical performance, safety, security and other matters covered by the Act.
Through S.O. 6180(E), the Central Government has exercised its powers under this section to notify the revised standard for equipment operating in the specified frequency bands.
Rule 5 of the Telecommunications Rules, 2025
Rule 5 deals with the notification and review of standards and conformity-assessment measures.
It provides for the revision of existing standards and allows the revised and earlier versions to operate concurrently for a specified period.
This provision is important because the government has allowed both versions of the relevant TEC standard to remain in force for 90 days.
How Does This Relate to TEC Certification?
TEC certification is concerned with establishing conformity with applicable technical standards and certification requirements.
Under the Mandatory Testing and Certification of Telecommunication Equipment (MTCTE) framework, covered equipment is assessed against relevant Essential Requirements.
However, a revised standard and a fresh certification requirement are not necessarily the same thing.
Whether a particular product needs an assessment, an existing certificate review or a new application depends on the applicable equipment category, certification provisions and official instructions.
Which Equipment Is Covered Under the Revised TEC59432610 Standard?
The revised standard concerns equipment operating in the 2.4 GHz, 5 GHz and 6 GHz frequency bands.
These bands are used in wireless communication equipment, including different types of Wi-Fi and wireless networking systems.
TEC's earlier published equipment references and its April 2026 consultation draft identify several product categories relevant to these bands. They include Wi-Fi access equipment, wireless controllers and point-to-point systems.
The draft is useful for understanding the equipment under consideration, but its contents must not be treated as the confirmed product scope of the final revised standard.
Equipment Operating in the 2.4 GHz Band
The 2.4 GHz frequency band is commonly used for wireless communication and local network connectivity.
Businesses dealing with Wi-Fi access and other potentially covered wireless equipment operating in this band should review the revised Essential Requirements.
The relevant requirements will depend on the actual product category, technical specifications and applicable testing provisions.
Equipment Operating in the 5 GHz Band
The 5 GHz band is also used for wireless networking and communication equipment.
Manufacturers and importers should check whether the revised standard affects the technical requirements applicable to their products.
Equipment operating in multiple frequency bands may need assessment against more than one set of relevant technical parameters.
Equipment Operating in the 6 GHz Band
One notable feature of TEC59432610 is that its title expressly includes the 6 GHz band.
This is particularly relevant to businesses dealing with wireless networking equipment that supports 6 GHz operation.
However, inclusion of the 6 GHz band in the standard does not automatically authorise every type of equipment to operate throughout that band in India.
Businesses must separately verify the applicable wireless spectrum conditions and regulatory approvals.
The 6 GHz frequency band should also not be confused with 6G mobile technology. The notification concerns equipment operating in a specified frequency band, not the introduction of a sixth-generation mobile network standard.
Equipment Categories Businesses Should Examine
Based on TEC's publicly available draft material, the following categories are relevant to an applicability review.
| Equipment Category | Why Businesses Should Check |
|---|---|
| Wi-Fi Access Points | To determine whether the revised Essential Requirements apply to the product |
| Wi-Fi Controllers | To review any relevant technical requirements and certification conditions |
| Wi-Fi Base Stations | To identify applicable wireless equipment specifications |
| Point-to-Point Wireless Systems | To examine the relevant radio-interface and technical requirements |
| Point-to-Multipoint Wireless Access Equipment | To confirm product classification and applicable testing requirements |
| Wireless Customer Premises Equipment (CPE) | To determine whether the equipment falls within the relevant certification category |
| WLAN Controller Equipment | To review applicable technical and conformity-assessment provisions |
These categories come from supporting TEC draft material, not the November Gazette's product-level list. Businesses should confirm the final applicability against the notified standard.
What Has Changed Under the TEC Revised Standard 2026?
The November 2026 notification introduces a revised essential requirements standard and establishes how it will operate alongside the earlier standard.
There are three important developments.
1. Revised TEC59432610 Has Been Notified
The government has notified TEC59432610 for equipment operating in the specified frequency bands.
Businesses assessing covered equipment will need to consider this revised standard according to the applicable transition and conformity-assessment requirements.
The technical changes themselves must be identified from the final revised Essential Requirements.
2. The Revised Standard Includes the 6 GHz Band
TEC's earlier published equipment listing identifies TEC59432407 for equipment operating in the 2.4 GHz and 5 GHz bands.
The November 2026 notification identifies TEC59432610 for equipment operating in 2.4 GHz, 5 GHz and 6 GHz bands.
This is a clear difference in the scope described by the published standard titles.
However, a title comparison does not establish every technical change. The actual requirements must be compared using the relevant official documents.
3. The Earlier and Revised Standards Will Operate Together for 90 Days
The government has not withdrawn the existing standard immediately.
Instead, it has provided a temporary period during which both standards remain applicable.
After the transition ends, the revised standard alone will apply.
This gives affected businesses a defined period in which to assess the revised requirements and any implications for their technical compliance arrangements.
Existing TEC Standard vs Revised TEC59432610: Key Differences
TEC's public equipment listing identifies TEC59432407 for equipment operating in the 2.4 GHz and 5 GHz bands.
The November 2026 Gazette notifies TEC59432610 for equipment operating in all three specified bands.
The confirmed differences are summarised below.
| Particulars | Earlier TEC Reference | Revised TEC Standard 2026 |
|---|---|---|
| Standard Number | TEC59432407, as identified in TEC's earlier public listing | TEC59432610 |
| Frequency Bands Identified | 2.4 GHz and 5 GHz | 2.4 GHz, 5 GHz and 6 GHz |
| Regulatory Position | Existing standard remains applicable during the notified concurrent period | Revised standard effective from Gazette publication |
| Technical Requirements | Governed by the applicable earlier Essential Requirements | Governed by the final revised Essential Requirements |
| Transition | Existing standard continues during the permitted period | Revised standard operates concurrently for 90 days |
| Position After Transition | Earlier standard ceases to apply under the notified transition provision | Revised standard alone applies |
A complete comparison of technical changes requires the final version of TEC59432610 and the applicable earlier standard.
The November Gazette does not identify individual testing parameters that have been introduced, removed or amended.
What Are the Technical Requirements Under the Revised TEC Standard?
The revised TEC standard is an Essential Requirements document.
In simple terms, Essential Requirements set out the technical criteria against which covered equipment may be assessed.
The November Gazette does not reproduce the detailed technical specifications. TEC's earlier standards and consultation material, however, indicate the types of technical areas that may be relevant to equipment in these frequency bands.
The exact requirements for TEC59432610 must be confirmed from its final official text.
1. Electromagnetic Compatibility
Electromagnetic compatibility, commonly called EMC, concerns the ability of equipment to operate correctly without causing unacceptable electromagnetic interference.
Wireless networking equipment may need assessment against relevant emission and immunity requirements.
These assessments can help determine whether a device meets the applicable technical criteria.
Businesses should check which EMC requirements are included in the revised standard and whether existing test reports cover the required parameters.
2. Electrical and Equipment Safety
Safety requirements address risks associated with the design and operation of equipment.
Depending on the product category, applicable technical standards may include electrical safety requirements.
Manufacturers should review the final standard to determine which safety tests and supporting specifications apply.
3. Radio Frequency and Wireless Interface Requirements
Radio interface requirements concern the equipment's wireless communication characteristics.
Depending on the relevant standard, these may include:
- Operating frequency.
- Transmission characteristics.
- Radio power measurements.
- Emission requirements.
- Other parameters relevant to the equipment's wireless interface.
The Gazette does not introduce specific numerical limits for these parameters.
Businesses must refer to the applicable technical standard and wireless regulatory requirements before making any changes to product specifications.
4. Network Interface Requirements
Some wireless equipment also contains Ethernet, optical or other communication interfaces.
Where applicable, those interfaces may be subject to separate technical requirements within the relevant Essential Requirements.
The appropriate assessment depends on the actual interfaces and functions supported by the equipment.
5. Product Testing and Supporting Technical Evidence
Businesses seeking certification for covered products may need to provide appropriate technical documents and test evidence under the applicable certification procedure.
The precise documentation requirements depend on the product category and certification instructions.
Existing test reports should be reviewed for relevance to the applicable standard instead of assuming that every previous report must be replaced.
What Is the 90-Day Transition Period Under the TEC Notification 2026?
The 90-day transition is the clearest immediate requirement established by S.O. 6180(E).
The revised standard took effect on 12 November 2026, the date it was published in the Official Gazette.
For the following 90-day period, the existing and revised standards remain in force concurrently.
After this period, the revised standard alone will apply.
Implementation Timeline
| Date or Period | Regulatory Position | Business Consideration |
|---|---|---|
| 9 November 2026 | Notification issued | Identify the relevant regulatory change |
| 12 November 2026 | Notification published in the Official Gazette | Revised standard becomes effective |
| 90 days from Gazette publication | Existing and revised standards operate concurrently | Review applicable technical and certification requirements |
| After the concurrent period | Only the revised standard applies | Use the applicable revised standard for relevant future assessments |
The Gazette specifies the 90-day period but does not separately state its final calendar date. Businesses should confirm the exact cut-off date under the applicable counting rules and any official implementation instructions.
What Does Concurrent Application Mean?
Concurrent application means that both versions of the standard remain in force during the specified period.
It does not mean businesses can ignore all applicable certification requirements until the transition ends.
Where certification is required, businesses must continue to follow the relevant regulatory process and any official instructions governing the use of the earlier or revised standard.
Why Is the Transition Important for Businesses?
The transition may be particularly relevant to businesses that are:
- Preparing to launch covered telecom equipment.
- Arranging product testing.
- Submitting a new TEC certification application.
- Waiting for an application to be processed.
- Reviewing existing product certification records.
Businesses should check how the transition affects their particular product rather than assuming the same arrangement applies to every certificate or application.
How Will the TEC Revised Standard 2026 Affect Manufacturers and Importers?
The practical impact of the notification will differ from one business to another.
A manufacturer preparing a new product for the Indian market may have different concerns from an importer holding certification for an existing model.
Impact on Telecom Equipment Manufacturers
Manufacturers dealing with covered products should review the revised standard against their existing technical specifications.
The review may involve examining product design records, supported wireless bands, interface specifications and existing test evidence.
If the revised standard changes an applicable technical requirement, the manufacturer may need to determine whether the product continues to meet that requirement.
This does not mean every manufacturer must immediately redesign or retest its equipment.
The need for further action depends on the actual technical changes and applicable conformity-assessment conditions.
Impact on Telecom Equipment Importers
Importers should check whether the products they intend to bring into India are covered by the revised standard.
Particular attention should be given to products that support multiple wireless bands or have been tested against an earlier version of the Essential Requirements.
Before relying on an existing certificate or foreign test report, importers should verify its relevance under the applicable Indian framework.
International testing documents do not automatically replace every Indian regulatory requirement.
Impact on Equipment Distributors and Suppliers
Suppliers should check the certification status of equipment covered by applicable telecom standards.
They may also need to confirm that product details, certification records and any required identification information correspond to the equipment being supplied.
The November notification does not introduce a separate certification procedure for every distributor.
Impact on Testing Laboratories
Testing laboratories and conformity-assessment bodies should review the technical standards applicable to their recognised testing scope.
Where testing is required under the revised standard, the laboratory must be appropriately recognised for the relevant work.
Businesses should confirm that the selected laboratory can perform the required assessment before arranging tests.
Will Existing TEC Certificates Remain Valid After the Revised Standard?
Businesses holding an existing TEC certificate may be concerned about whether the revision makes that certificate invalid.
The November 2026 notification does not expressly state that all existing certificates will be cancelled or that every certified product must undergo fresh testing.
The position depends on the applicable certification rules, certificate conditions and any instructions issued by the competent authority.
Existing TEC Certificates
Certificate holders should review:
- The product model and brand covered by the certificate.
- The Essential Requirements referenced in the certification.
- The validity period and applicable conditions.
- Whether the equipment has undergone any material technical change.
- Whether specific transition instructions apply.
The Telecommunications Rules, 2025 also contain provisions concerning circumstances in which recertification is not required.
Those provisions must be read with their conditions. The November notification should not be treated as automatically overriding them.
Pending TEC Certification Applications
Businesses with applications under review should verify which standard version will be used for assessment.
The concurrent application period may be relevant, but the Gazette does not prescribe detailed procedures for every pending application.
Applicants should check official instructions through the MTCTE portal or the relevant certification authority.
New TEC Certification Applications
Businesses planning a new application should determine which standard applies to the product and the proposed assessment.
This is particularly important where the application or testing process may continue beyond the 90-day transition period.
The appropriate approach is to confirm the applicable requirements before submitting documents or arranging testing.
Does the Revised TEC59432610 Standard Require Fresh Testing or Certification?
The revised standard does not automatically mean that every existing telecom product must obtain a fresh certificate.
The Gazette notifies the revised Essential Requirements and provides the transition period. It does not issue a universal direction for fresh testing of all previously certified products.
Whether additional testing or certification is required depends on factors such as:
- Whether the product is covered by the applicable standard.
- Whether the product already holds a relevant certificate.
- Whether the applicable technical requirements have changed.
- Whether the product model or its specifications have changed.
- Whether the governing rules or official instructions require a further assessment.
Businesses should obtain clarity on these matters before beginning another certification process.
Unnecessary testing can add costs, while failing to complete a required assessment can create compliance problems.
What Is the Role of MTCTE Certification in the Revised TEC Standard?
Mandatory Testing and Certification of Telecommunication Equipment (MTCTE) is the framework used for assessing specified telecom equipment against applicable Essential Requirements.
Under the Telecommunications Rules, 2025, a person to whom a notified standard applies must comply with the applicable conformity-assessment measures and obtain a certificate where required.
The MTCTE process may involve technical documentation, testing and examination of compliance evidence according to the relevant product category.
What Is the Difference Between a TEC Standard and TEC Certification?
A TEC standard identifies the technical requirements applicable to a product.
TEC certification involves demonstrating conformity with the relevant requirements under the applicable certification framework.
The distinction matters because a revised technical standard does not automatically establish an identical new certification obligation for every product operating in the same frequency band.
Businesses must first identify the applicable product category and regulatory requirements.
How Should Businesses Select a Testing Laboratory?
Where product testing is required, the laboratory should have the appropriate recognition for the relevant test scope.
TEC publishes information about recognised Conformity Assessment Bodies (CABs).
Before selecting a laboratory, businesses should check whether its recognised scope covers the required product category and technical parameters.
A laboratory being recognised for one type of equipment does not automatically mean it is recognised for every TEC test.
Is WPC Approval Different From TEC Certification?
Businesses dealing with wireless equipment may encounter both TEC requirements and Wireless Planning and Coordination (WPC) requirements.
These relate to different regulatory functions.
TEC requirements concern applicable technical standards, conformity assessment and certification for covered telecommunications equipment.
WPC requirements concern matters relating to radio frequency spectrum and wireless equipment under the applicable wireless regulatory framework.
A product may need assessment under more than one regulatory requirement, depending on its characteristics and intended use.
Compliance with a TEC technical standard should not be treated as automatic permission to use every radio frequency band in India.
Similarly, an applicable wireless approval does not necessarily replace a TEC certificate where one is separately required.
This distinction is particularly important when assessing equipment capable of operating in the 6 GHz band.
Are Any Exemptions Available Under the Telecommunications Rules, 2025?
The broader Telecommunications Rules, 2025 provide specified exemptions from conformity-assessment requirements.
These provisions are separate from the November 2026 notification.
Equipment Imported for Research, Testing or Demonstration
The rules provide an exemption for telecommunications equipment imported for purposes such as research and development, demonstration, sample testing or a regulatory sandbox.
The exemption is subject to the applicable rules and procedures for those activities.
It should not be assumed to cover routine commercial imports.
Equipment Brought Into India for Personal Use
The rules also provide an exemption for telecommunications equipment brought into India by a person for personal use, provided the equipment is not otherwise prohibited from import or use under applicable law.
The conditions must be checked before relying on this exemption.
Recertification-Related Provisions
Rule 9 also deals with circumstances in which recertification of equipment covered by a notified standard is not required, including specified conditions concerning certified models or brands and labelling compliance.
Businesses should examine the exact wording and any applicable official instructions before deciding whether they qualify.
These are provisions of the existing regulatory framework. They should not be described as new exemptions introduced by S.O. 6180(E).
What Should Businesses Do After the TEC November 2026 Notification?
The first step is to establish whether the revised standard applies to the equipment in question.
Businesses can then decide whether any technical review, testing or certification action is necessary.
1. Check the Equipment Category
Identify the exact product category, wireless operating bands and technical specifications.
Compare these details with the final TEC59432610 Essential Requirements and relevant equipment classification.
2. Review the Revised Essential Requirements
Obtain the final notified technical standard and examine the provisions relevant to the product.
Do not make product design or testing decisions solely from the short Gazette notification.
3. Examine Existing TEC Certification Records
Where the product already has a certificate, check its scope, validity and applicable conditions.
Confirm whether the certificate remains appropriate for the equipment and whether any additional official requirement applies.
4. Compare the Earlier and Revised Technical Provisions
Where both standard versions are available, identify the technical differences relevant to the equipment.
This can help determine whether the business needs to review product design, test reports or other technical records.
5. Verify Applicable Testing Requirements
If further testing is needed, identify the correct test parameters and suitably recognised laboratory.
Testing arrangements should follow the relevant standard and certification instructions.
6. Review Pending and Planned Applications
Businesses with pending or upcoming applications should check which standard version can be used during the transition.
This is especially relevant where testing or assessment may continue beyond the concurrent application period.
7. Keep Track of Official TEC Instructions
Continue checking official DoT and TEC communications for any implementation instructions relevant to the revised standard.
Do not rely on assumptions about certificate validity, retesting or application procedures.
Practical Compliance Review Checklist
| Review Area | What Businesses Should Check |
|---|---|
| Product applicability | Whether the equipment falls within TEC59432610 |
| Frequency band | Whether the equipment operates in 2.4 GHz, 5 GHz or 6 GHz |
| Existing certification | Certificate validity, scope and conditions |
| Technical requirements | Applicable revised Essential Requirements |
| Test reports | Whether existing evidence covers the relevant requirements |
| Pending applications | Applicable standard version and authority instructions |
| Laboratory recognition | Whether the proposed CAB has the required test scope |
| Other approvals | Whether separate wireless or other regulatory requirements apply |
| Transition planning | Requirements that will apply after the concurrent period |
The checklist is a practical review tool. It is not a new statutory application procedure created by the notification.
What Are the Risks of Non-Compliance With the Revised TEC Standard?
Businesses dealing with equipment subject to mandatory conformity assessment should pay attention to the applicable certification requirements.
Under Rule 8 of the Telecommunications Rules, 2025, telecom equipment to which a notified standard applies must not be sold, deployed in a telecommunications network or otherwise used in India without a valid Certificate of Conformity Assessment, subject to the relevant legal provisions and exemptions.
The rules also contain procedures concerning equipment that does not have a valid certificate where one is required.
These provisions are part of the existing 2025 framework. They are not penalties newly introduced by the November 2026 Gazette notification.
Potential Compliance Concerns
- Using the wrong technical standard: An assessment based on an inapplicable earlier standard may create difficulties after the transition.
- Incorrect product classification: A business may overlook applicable requirements if it does not correctly identify the equipment category.
- Incomplete testing evidence: Technical reports may not address all required parameters for the applicable standard.
- Unverified certification status: An existing certificate may be incorrectly assumed to cover a different product or model.
- Missing separate approvals: Wireless equipment may be subject to requirements beyond the TEC standard.
Where a valid certificate is legally required, failure to meet the applicable conformity-assessment obligations can lead to regulatory action under the governing framework.
Businesses should therefore establish their actual obligations rather than assuming that every device operating in the specified bands is subject to the same certification process.
Does the TEC November 2026 Notification Introduce New Certification Fees?
The Gazette notification does not prescribe any new certification fee or product testing charge.
It also does not provide a separate application fee schedule for TEC59432610.
Where certification or testing fees apply, businesses should consult the relevant official fee schedule and current certification instructions.
The amount payable may depend on the applicable certification procedure, equipment category and testing requirements.
The notification should not be interpreted as announcing a new standard fee for every manufacturer or importer.
What Is Not Covered in the TEC November 2026 Notification?
S.O. 6180(E) is a short notification dealing with the revised standard and its transition period.
It does not provide a complete technical or certification manual.
Several matters therefore require examination of separate official documents.
These include:
- The final product-level scope of TEC59432610.
- Detailed technical parameters and testing specifications.
- Changes to individual requirements compared with the earlier standard.
- Certification procedures for particular equipment categories.
- Treatment of every existing certificate and pending application.
- Exact testing and certification fees.
- Whether additional assessment is required for a particular certified product.
These details should be checked against the final revised standard, the Telecommunications Rules, 2025 and applicable TEC certification instructions.
The absence of a requirement from this particular Gazette does not mean that the requirement cannot arise under another applicable regulatory provision.
How Corpseed Can Help With TEC Certification and Telecom Equipment Compliance?
The revised TEC standard may require affected businesses to review their product specifications, technical documents and applicable certification requirements.
For manufacturers and importers unfamiliar with the certification process, determining which standards apply can be an important first step.
Corpseed provides TEC certification services and support relating to telecom equipment regulatory compliance.
Depending on the product and applicable service requirements, Corpseed can assist with the following areas:
- TEC applicability assessment: Helping businesses understand which certification requirements may apply to their equipment.
- Document preparation: Assisting with the preparation and review of documents relevant to the certification process.
- TEC certificate application support: Providing guidance and assistance with applicable certification procedures.
- Testing coordination: Helping businesses understand relevant testing requirements and coordinate with appropriate testing providers.
- MTCTE certification assistance: Supporting businesses with the applicable process for equipment covered by mandatory certification requirements.
- Compliance review: Helping manufacturers and importers examine relevant regulatory requirements before proceeding with an application.
Professional assistance is not a substitute for a legally required test or certificate, and obtaining consultancy support is not itself a statutory obligation.
Need assistance with TEC certification in India?
Corpseed can help you review the requirements applicable to your telecom equipment and understand the relevant certification process.
Book a Free Consultation with Corpseed to discuss TEC certification, MTCTE compliance and related regulatory support for your business.
Key Takeaways
The November 2026 notification establishes an updated technical standard for equipment operating in three specified wireless frequency bands.
The important points are:
- The Department of Telecommunications notified TEC59432610 through S.O. 6180(E).
- The notification was issued on 9 November 2026 and published on 12 November 2026.
- The revised standard concerns equipment operating in 2.4 GHz, 5 GHz and 6 GHz bands.
- Both the existing and revised standards remain applicable concurrently for 90 days from Gazette publication.
- After the transition, the revised standard alone applies.
- The notification does not expressly require all existing certificates to be cancelled or every previously certified product to undergo fresh testing.
- Manufacturers and importers should check the final standard, product applicability and relevant certification instructions before taking action.
Schedule a Call Back
Document Preview
Embedded reference document
Related
Explore more updates from the same department.
