BIS November 2026 Notification: 7 Indian Standards and Withdrawal Dates
All seven standards were established on 3 November 2026. Six replace earlier editions that will remain in force concurrently until 3 May 2027. The seventh, IS 19916:2026, introduces a standard for non-refillable LPG cartridges without identifying an earlier standard for withdrawal.
The BIS new standards notification 2026 is relevant to manufacturers, importers, testing laboratories, healthcare technology providers and businesses referring to these specifications in their technical documentation.
Businesses should review the revised standards, identify applicable product requirements and verify whether any separate Quality Control Order (QCO) or certification condition affects their operations.
BIS November 2026 Notification at a Glance
| Particular | Details |
|---|---|
| Regulatory Authority | Bureau of Indian Standards (BIS) |
| Department | Department of Consumer Affairs |
| Notification Reference | HQ-PUB013/1/2020-PUB-BIS (1636) |
| Notification Date | 4 November 2026 |
| Gazette Issue Date | 6 November 2026 |
| Gazette Publication / Upload | 12 November 2026 |
| Gazette Identification Number | CG-DL-E-12112026-277869 |
| Governing Provision | Rule 15(1), BIS Rules, 2018 |
| Standards Established | 7 |
| Date of Establishment | 3 November 2026 |
| Earlier Standards Scheduled for Withdrawal | 6 |
| Withdrawal Date | 3 May 2027 |
| New Standard Without Listed Predecessor | IS 19916:2026 |
| Regulatory Action | Establishment and revision of Indian Standards |
The Gazette schedule confirms that six earlier standards will continue alongside their corresponding newly established standards until their withdrawal on 3 May 2027.
What Is the Regulatory Basis for the BIS November 2026 Notification?
The Bureau of Indian Standards (BIS) issued the notification under Rule 15(1) of the BIS Rules, 2018. It establishes seven Indian Standards and identifies six earlier editions scheduled for withdrawal on 3 May 2027. The revised standards cover gas cylinders, capacitors, medical equipment, LPG cartridges and health information systems.
However, introducing or revising an Indian Standard does not automatically make BIS certification mandatory. Compulsory certification depends on applicable legal requirements, including Quality Control Orders (QCOs). Manufacturers and importers should verify the relevant standards and certification conditions before applying for a new BIS licence or updating an existing one.
What Has BIS Changed Under the November 2026 Notification?
BIS has introduced revised standards in six areas and established one standard for which no earlier version is identified in the Gazette.
| Type of BIS Action | Number of Standards | Effective Date | Meaning |
|---|---|---|---|
| Establishment of Indian Standards | 7 | 3 November 2026 | The listed standards have been established |
| Revision of Existing Standards | 6 | 3 November 2026 | Revised editions have been established |
| Earlier Standards Scheduled for Withdrawal | 6 | 3 May 2027 | Earlier editions remain in force until the specified date |
| Standard Without Listed Predecessor | 1 | 3 November 2026 | IS 19916:2026 has no earlier standard identified for withdrawal |
| New Mandatory BIS Certification Requirement | Not specified | - | No new compulsory certification obligation is announced by this notification |
The notification does not provide detailed technical comparisons between the previous and revised editions. Businesses must examine the relevant standard documents to identify changes in product specifications, testing methods or documentation requirements.
Complete List of 7 Indian Standards Notified by BIS in November 2026
All seven standards were established on 3 November 2026. The withdrawal date for the six earlier editions is 3 May 2027.
| S. No. | Established Indian Standard | Subject | Earlier Standard | Withdrawal Date |
|---|---|---|---|---|
| 1 | IS 7285 (Part 2):2026 | Refillable Seamless Steel Gas Cylinders โ Quenched and Tempered Steel Cylinders with Tensile Strength Less than 1,100 MPa | IS 7285 (Part 2):2017 | 3 May 2027 |
| 2 | IS 13666:2026 | Energy Storage Capacitors โ Specification | IS 13666:1993 | 3 May 2027 |
| 3 | IS/ISO 14408:2016 | Tracheal Tubes Designed for Laser Surgery โ Requirements for Marking and Accompanying Information | IS/ISO 14408:2005 | 3 May 2027 |
| 4 | IS 17769:2026 / ISO 17523:2025 | Health Informatics โ Requirements for Electronic Prescriptions | IS 17769:2022 / ISO 17523:2016 | 3 May 2027 |
| 5 | IS 17888:2026 / ISO 27269:2025 | Health Informatics โ International Patient Summary | IS 17888:2022 / ISO 27269:2021 | 3 May 2027 |
| 6 | IS 19916:2026 | Light Gauge Metal Containers โ Non-Refillable LPG Cartridges โ Specification | Not applicable | Not applicable |
| 7 | IS/IEC 60358-1:2025 | Coupling Capacitors and Capacitor Dividers โ Part 1: General Rules | IS/IEC 60358-1:2012 | 3 May 2027 |
Important: The Gazette lists IS/ISO 14408:2016 as established on 3 November 2026. The standard designation has been reproduced exactly as notified and should not be changed to IS/ISO 14408:2026.
Industry-Wise Impact of the Revised BIS Standards 2026
The seven standards cover different products and technical applications. Their practical impact depends on whether businesses manufacture, import, test, supply or use products covered by these specifications.
Refillable Seamless Steel Gas Cylinders- IS 7285 (Part 2):2026
BIS has established the fifth revision of IS 7285 (Part 2):2026, covering refillable seamless steel gas cylinders made from quenched and tempered steel with tensile strength below 1,100 MPa.
The revised edition replaces IS 7285 (Part 2):2017, which is scheduled for withdrawal on 3 May 2027.
Businesses that may be affected include:
- Seamless steel gas cylinder manufacturers.
- Industrial gas cylinder suppliers and importers.
- Cylinder testing and inspection organisations.
- Manufacturers using the standard in product specifications.
- Businesses holding relevant certification or technical approvals.
Manufacturers should compare the previous and revised specifications to identify any changes affecting materials, manufacturing controls, testing or technical documentation.
The notification does not amend the Gas Cylinders Rules or independently introduce a fresh cylinder approval requirement.
Energy Storage Capacitors- IS 13666:2026
BIS has established IS 13666:2026, the first revision of the Indian Standard for energy storage capacitors.
It replaces IS 13666:1993, which will be withdrawn on 3 May 2027.
This development may be relevant to capacitor manufacturers, electrical equipment suppliers, engineering companies and product testing laboratories.
Businesses should review:
- Existing capacitor specifications.
- Product testing procedures and technical reports.
- Manufacturing and quality-control documentation.
- Supplier declarations and procurement requirements.
- Applicable BIS certification conditions.
The Gazette does not identify the individual technical changes introduced by the revised standard. Manufacturers should refer to the standard itself before modifying product designs or testing procedures.
Tracheal Tubes Designed for Laser Surgery- IS/ISO 14408:2016
BIS has established the first revision of IS/ISO 14408:2016, dealing with marking requirements and accompanying information for tracheal tubes designed for laser surgery.
The previous standard, IS/ISO 14408:2005, is scheduled for withdrawal on 3 May 2027.
This update is particularly relevant to medical device manufacturers, importers and companies dealing with specialised surgical airway products.
Businesses should examine:
- Product marking and identification details.
- Accompanying product information.
- Instructions and documentation supplied with devices.
- References to the earlier standard in technical files.
- Applicable medical device regulatory requirements.
The notification concerns the Indian Standard itself. It does not independently amend the Medical Devices Rules, 2017, or establish a new CDSCO licence requirement.
Manufacturers and importers should separately verify the applicable CDSCO regulatory position.
Electronic Prescription Requirements- IS 17769:2026
BIS has established IS 17769:2026, corresponding to ISO 17523:2025, for health informatics requirements relating to electronic prescriptions.
It replaces IS 17769:2022 / ISO 17523:2016. The earlier edition will be withdrawn on 3 May 2027.
The revised standard may be relevant to healthcare software developers, electronic prescription solution providers and health information technology organisations using the standard.
Areas for review include:
- Electronic prescription system specifications.
- Technical documentation referring to the earlier standard.
- Healthcare information exchange requirements.
- Software testing and validation procedures.
- Contractual requirements involving electronic prescription standards.
The notification does not make BIS certification mandatory for all electronic prescription platforms or introduce new compulsory registration requirements for healthcare software.
International Patient Summary- IS 17888:2026
BIS has established IS 17888:2026, corresponding to ISO 27269:2025, for the International Patient Summary. The revised standard replaces IS 17888:2022 / ISO 27269:2021, which is scheduled for withdrawal on 3 May 2027. It covers health information used in international patient summaries and is relevant to hospitals, healthcare IT providers and digital health solution developers.
Businesses following the earlier standard should review their technical documentation, health information exchange specifications and system requirements. However, this BIS notification does not introduce mandatory BIS certification for all healthcare providers or impose new registration requirements on hospitals.
Non-Refillable LPG Cartridges- IS 19916:2026
BIS has established IS 19916:2026 for light gauge metal containers used as non-refillable LPG cartridges.
Unlike the other entries, the notification does not identify an earlier Indian Standard for withdrawal.
This standard may be relevant to:
- Non-refillable LPG cartridge manufacturers.
- Cartridge importers and suppliers.
- Metal container manufacturers.
- Product testing and inspection laboratories.
- Businesses sourcing non-refillable LPG cartridges.
Manufacturers should obtain the standard and examine its applicable technical requirements before assessing whether any product changes are needed.
Does IS 19916:2026 make BIS certification mandatory?
The notification does not declare compulsory BIS certification for non-refillable LPG cartridges. Businesses must separately verify whether a Quality Control Order or another applicable legal instrument requires certification.
The establishment of IS 19916:2026 should not be interpreted as the automatic introduction of a new ISI certification requirement.
Coupling Capacitors and Capacitor Dividers- IS/IEC 60358-1:2025
BIS has established IS/IEC 60358-1:2025, the third revision of the standard covering coupling capacitors and capacitor dividers. The revised standard addresses Part 1: General Rules.
It replaces IS/IEC 60358-1:2012, which will be withdrawn on 3 May 2027.
This development may affect electrical equipment manufacturers, capacitor suppliers, testing laboratories and organisations using the standard in technical specifications.
Businesses should examine existing product documentation, testing references, inspection requirements and applicable certification conditions.
The notification does not specify the individual technical modifications introduced under the third revision.
What Does the 3 May 2027 Withdrawal Date Mean?
The Gazette establishes a defined period during which the six earlier standards remain in force alongside the newly established editions.
The relevant dates are:
| Event | Date |
|---|---|
| Establishment of Seven Standards | 3 November 2026 |
| BIS Notification Issued | 4 November 2026 |
| Gazette Issue Date | 6 November 2026 |
| Gazette Published / Uploaded | 12 November 2026 |
| Withdrawal of Six Earlier Standards | 3 May 2027 |
Until 3 May 2027, the six earlier editions identified in the notification remain in force concurrently with their revised versions. After the specified withdrawal date, businesses should not treat those earlier editions as current Indian Standards without checking the applicable regulatory position.
However, this concurrent-validity period should not automatically be treated as a certification transition arrangement covering every BIS licence.
Licence-specific requirements, implementation guidelines and applicable Quality Control Orders must be checked separately.
How Will the Revised BIS Standards Affect Manufacturers?
Manufacturers using the affected Indian Standards should review whether their existing product specifications, technical files and testing procedures refer to the earlier editions.
A revision can require additional technical assessment where the updated standard changes relevant product requirements. The exact changes cannot be determined from the Gazette notification alone.
Manufacturers should check:
- Product Standards: Identify the applicable revised Indian Standard.
- BIS Licence: Verify whether the standard is linked to an existing certification scope.
- Testing Requirements: Compare the relevant technical and testing provisions.
- Product Specifications: Review drawings, material specifications and quality documents.
- Supplier Records: Check whether suppliers continue referring to earlier editions.
- Applicable QCO: Determine whether compulsory certification applies.
- Implementation Instructions: Review any separate directions issued by BIS.
Not every manufacturer using one of these standards will necessarily need a fresh BIS certificate.
The correct action depends on the applicable regulatory requirements and the status of the manufacturer's existing certification.
What Should Importers Check Under the BIS Notification?
Importers dealing with affected products should verify the applicable Indian Standard and determine whether mandatory BIS certification is required.
This is particularly relevant to businesses importing gas cylinders, capacitors, medical devices, LPG cartridges or related electrical products covered by the notification.
Importers should review:
- Applicable product classification and Indian Standard.
- Relevant Quality Control Orders.
- Existing BIS licence or certification documents.
- Foreign manufacturer's certification status, where applicable.
- Product testing reports and technical specifications.
- Supplier declarations and conformity documents.
- Separate regulatory requirements for the imported product.
The notification does not itself introduce new import restrictions or a universal requirement for foreign manufacturers to apply for BIS certification.
Impact on BIS Certification and Existing ISI Licence Holders
Businesses holding BIS licences should examine whether any of the revised standards apply to their certified products.
The Gazette establishes seven standards but does not announce the automatic cancellation of existing BIS licences.
Licence holders should review the following areas:
| Compliance Area | Recommended Review |
|---|---|
| BIS Licence | Check the standard identified in the certification scope |
| Applicable Indian Standard | Confirm the current and earlier editions |
| Quality Control Order | Verify mandatory certification applicability |
| Product Testing | Review testing methods and technical reports |
| Product Documentation | Check drawings, specifications and quality records |
| Implementation Requirements | Review separate BIS directions, where issued |
| Supplier Compliance | Confirm the standards cited in supplier documentation |
Businesses should not assume that the establishment of a revised standard automatically requires a new application or immediate recertification.
Where mandatory certification applies, the appropriate course of action should be determined from the relevant QCO, licence conditions and BIS implementation instructions.
Does Every Product Covered by the Seven Standards Require Mandatory BIS Certification?
No. The notification does not make BIS certification compulsory for every product covered by the seven Indian Standards. BIS certification may be voluntary or mandatory depending on the product and the applicable legal framework.
For example, a manufacturer may use an Indian Standard for product quality, testing or customer requirements without the product necessarily falling under a compulsory BIS certification scheme.
Before seeking ISI certification services or applying for a BIS licence, manufacturers and importers should confirm:
- Whether a relevant Quality Control Order applies.
- Whether the product falls under mandatory BIS certification.
- Which Indian Standard is prescribed.
- Whether separate BIS implementation instructions exist.
- Whether an existing licence needs any modification.
- Whether another product-specific regulatory approval is required.
An experienced BIS certification consultant can help businesses assess these requirements before they begin the certification process.
Difference Between BIS Standard Revision and Withdrawal
Revision and withdrawal are different regulatory actions. The November 2026 notification involves both the establishment of revised standards and the future withdrawal of earlier editions.
| Particular | Standard Revision | Standard Withdrawal |
|---|---|---|
| Meaning | An updated edition of an existing standard is established | An earlier standard is withdrawn |
| Technical Requirements | May introduce changes to specifications or testing provisions | The withdrawn edition ceases to remain in force as a current Indian Standard |
| Effective Date | Date notified for establishment | Date notified for withdrawal |
| Business Action | Compare revised requirements with existing documents | Verify current applicable references |
| Current Notification | Six revised standards established | Six earlier standards scheduled for withdrawal |
| Key Date | 3 November 2026 | 3 May 2027 |
IS 19916:2026 differs from the six revised standards because the Gazette does not identify any earlier edition being withdrawn.
What Should Testing Laboratories Do?
Testing laboratories using the earlier standards should review their testing methods and related technical records.
The relevant areas may include gas cylinder testing, electrical equipment testing, capacitor evaluation and other products covered by the notified standards.
Laboratories should check:
- Standard operating procedures and technical methods.
- Test reports and reporting formats.
- Equipment specifications and laboratory records.
- References to withdrawn or revised standards.
- Customer testing requirements.
- NABL accreditation scope, where applicable.
Where a laboratory's accreditation scope refers to an earlier standard, the laboratory should verify the applicable accreditation requirements separately.
The Gazette does not automatically amend NABL accreditation scopes or prescribe replacement laboratory procedures.
Compliance Challenges Businesses May Face
The revision of seven Indian Standards may require businesses to review technical references across different departments.
Some practical challenges include:
- Outdated Standard References: Existing quality manuals, product specifications or supplier records may still mention earlier editions.
- Technical Comparison: Manufacturers may need to obtain and compare the relevant standard documents.
- Certification Uncertainty: Businesses may be unsure whether a revised standard affects their current BIS licence.
- Supplier Coordination: Manufacturers and importers may need updated product documentation from suppliers.
- Testing Documentation: Laboratories may need to review test methods and reporting procedures.
- Medical Device Compliance: Manufacturers may need to distinguish BIS standards requirements from separate CDSCO regulatory obligations.
- Concurrent Validity: Businesses may need to determine which edition applies to a particular certification, contract or technical requirement before 3 May 2027.
The extent of the review depends on how the business uses the affected standard.
What Should Businesses Do After the BIS November 2026 Notification?
Businesses implementing any one of these seven standards can do the following.
Step 1: Identify the relevant standard
Compare the seven notified standards with existing product specifications, procurement documents, testing methods and certification records.
Step 2: Verify the establishment and withdrawal dates
Recording 3 November 2026 as the establishment date and 3 May 2027 as the withdrawal date of the first six standards.
Step 3: Obtain the applicable revised standard
Examining the standard itself to obtain the technical requirements that are relevant. This cannot be achieved merely from the Gazette.
Step 4: Check BIS certification applicability
Checking the existence of any QCOs, certification scheme or other applicable legislation which makes BIS certification compulsory.
Step 5: Review existing technical records
Evaluate test reports, product drawings, quality manuals, supplier declarations, and relevant contracts.
Step 6: Confirm any implementation requirements
Where an existing BIS licence exists, checking the relevant licence conditions and BIS instructions before making changes to the certification process.
Step 7: Maintain a compliance review record
Maintain records of standards evaluated, technical changes made, legal requirements complied with and actions taken.
Risks Businesses Should Avoid
Manufacturers and importers should avoid making assumptions about the regulatory impact of the revised standards.
- Assuming all seven standards require mandatory certification: The notification does not introduce such a requirement.
- Ignoring the withdrawal date: Six earlier standards are scheduled for withdrawal on 3 May 2027.
- Using outdated technical references: Product specifications and quality records may require review.
- Treating concurrent validity as universal certification approval: Licence-specific requirements must be verified separately.
- Assuming existing BIS licences are cancelled: The Gazette does not declare automatic cancellation.
- Changing testing methods without technical verification: The actual standard documents must be examined.
- Overlooking other regulations: Medical devices, gas cylinders and other regulated products may remain subject to separate statutory requirements.
Are There Any New BIS Certification Fees or Penalties?
The notification does not impose any new certification charges, testing fees, penalties or environmental costs. These will vary according to the product, certification process, laboratory test requirement and type of compliance activity performed.
Any business wanting to avail of the services of BIS or seek ISI certification needs to check their cost and certification process separately.
It would be incorrect to claim that the revised standards automatically create new certification expenses or penalties for all affected manufacturers.
What Should Businesses Watch Before 3 May 2027?
Companies that have been utilizing the previous versions will have to keep an eye on the following things:
- Product-specific BIS implementation instructions.
- Applicable Quality Control Orders and amendments.
- Updated certification guidelines.
- Revised testing requirements.
- Existing BIS licence conditions.
- Laboratory accreditation requirements.
- Product-specific guidance from other regulatory authorities.
In cases where a new standard is associated with mandatory BIS certification, the company must find out about the implementation requirements well in advance.
How Corpseed Can Help with BIS Certification and Product Compliance
The BIS November 2026 notification may require manufacturers, importers and testing laboratories to review product standards, certification conditions and technical records.
Corpseed offers BIS certification services and product compliance support to help businesses identify applicable regulatory requirements and prepare for certification procedures.
Corpseed's support includes:
- BIS Applicability Assessment: Assessing if there is a need for mandatory BIS certification for the concerned product.
- Quality Control Order Review: Examining relevant QCOs and product certification obligations.
- BIS and ISI Certification Support: Supporting eligible manufacturers in documentation, application, and certification process.
- Indian Standard Verification: Helping businesses identify applicable standards and revised technical references.
- Technical Documentation Support: Reviewing product specifications, test reports and certification-related records.
- Product Testing Coordination: Assisting with relevant testing requirements and laboratory coordination.
- Importer and Manufacturer Compliance: Supporting domestic manufacturers and importers in understanding applicable BIS requirements.
- Ongoing Regulatory Support: Providing guidance on changes to Indian Standards, certification requirements and compliance documentation.
Businesses uncertain about the revised standards can consult a BIS certification consultant to understand whether the changes affect their existing certification or product compliance requirements.
Need assistance with BIS certification, ISI certification or revised Indian Standards?
Contact Corpseed for guidance on BIS certification applicability, technical documentation and product compliance requirements.
Book a Free Consultation | Talk to a BIS Expert
Key Takeaways
- The Bureau of Indian Standards notified seven Indian Standards under reference HQ-PUB013/1/2020-PUB-BIS (1636).
- The notification is dated 4 November 2026, and it has been published/uploaded in the Gazette of India on 12 November 2026.
- The date of establishment of all the seven standards is 3 November 2026.
- Six revised standards replace earlier editions scheduled for withdrawal on 3 May 2027.
- IS 19916:2026 deals with Non-Refillable LPG Cartridges and no previous standard is identified for withdrawal in its regard.
- The affected areas include gas cylinders, capacitors, medical equipment, health informatics and LPG cartridges.
- Establishment of an Indian Standard does not automatically make BIS certification mandatory.
- The said notification does not introduce any fees, penalties or mandatory certification of specific products independently.
- The manufacturers/importers need to check out the relevant standards, QCOs and Licences/Testing required.
- Corpseed can assist businesses with BIS certification services, standards applicability assessments and product compliance support.
