Corpseed

BIS Notifies 28 New and Revised Indian Standards in 2026: Key Changes and Compliance Requirements

Department: Department of Consumer AffairsAuthority: BISPublish: Applicable: 3 November 2026Product Quality ComplianceSafety and Regulatory

Quick note

Below is the official summary and the reference document preview. Use โ€œOpen PDFโ€ for full screen view.

Schedule a Call Back

IN +91

750+ BIS certification assignments since 2018

Clients include Juki India, Nibav Lifts, Normet India, Hirotec India, Kito India, Technotorc Tools, N Steels, Agromach Engineering, Emerson Automation Solutions Intelligent Platforms, Intangles Lab, Deki Electronics, Emerson Process Management (India) (12 of 450+ served since 2018).

A few more clients we've served in this industry
Engineering and manufacturing
Juki India ยท Nibav Lifts ยท Normet India ยท Hirotec India ยท Kito India ยท Technotorc Tools ยท N Steels ยท Agromach Engineering
Electronics and technology
Emerson Automation Solutions Intelligent Platforms ยท Intangles Lab ยท Deki Electronics ยท Emerson Process Management (India) ยท Martelx Electronics ยท Waites Sensor Technologies ยท Fleetx Technologies ยท Comap India
Jewellery
Swarnmala Jewellers ยท Muktavali Jewellers ยท Omana Jewels ยท Escarl Jewels ยท Aahaana Mooguthi ยท Aparna Jewels ยท Arraa Gold ยท DV Jewellery
Pharma and healthcare
Radimage Healthcare India ยท Sonova Hearing India ยท Agfa Healthcare India
Energy and power
Bitek Solar ยท Sodion Energy ยท Essar Oil and Gas Exploration and Production
Chemicals and materials
Sreechem Resins ยท Appl GOR Plastics India ยท Global Colours and Chemicals
More clients
Nilkamal ยท Siddhartha Logistics ยท GHV Medical Anchor ยท Geepas India ยท Smarthome Solutions India ยท Lumiere Technologies ยท Tegamen Safety Products ยท Patel Agrotech ยท Abbie IT Mart ยท Aqua Water Systems (India) ยท Pentair Water Treatment ยท WIN the BUY BOX ยท TNY Services (India) ยท Silcom (PTY) ยท Zeal Medical
See our BIS certification service โ†’

Summary

The Bureau of Indian Standards (BIS) has notified the establishment of 28 Indian Standards in 2026, covering construction materials, industrial machinery, conveyor belts, precision measurement, pharmaceuticals, textiles, tea and waste collection vehicles. The notification was issued on 8 October 2026 under Rule 15(1) of the Bureau of Indian Standards Rules, 2018, and published in the Gazette of India on 3 November 2026.

Of the 28 notified standards, eight are revised editions of existing Indian Standards, while the remaining 20 have no corresponding earlier standards listed for withdrawal. The revised standards cover products and technical processes such as lime-based blocks, precision measuring instruments, conveyor belts and industrial testing methods. The additional standards address areas including surface texture measurement, pharmaceutical materials, homoeopathic tablets, textile testing and tea classification.

All 28 standards were established on 6 October 2026. However, the eight earlier standards identified in the notification will remain in force concurrently until 6 April 2027. This allows affected manufacturers, testing laboratories and industrial businesses to examine the revised specifications and determine whether changes to their technical documentation, testing methods or quality management procedures are necessary.

What Has BIS Announced Through the October 2026 Notification?

The Bureau of Indian Standards has formally established 28 Indian Standards covering different manufacturing sectors and technical applications.

The notification identifies the newly established standards, their establishment dates, the earlier Indian Standards proposed for withdrawal, where applicable, and their respective withdrawal dates.

The changes can be divided into three categories:

  1. Revision of Existing Indian Standards

    Eight previously established Indian Standards have been revised. The revised editions address construction materials, engineering equipment, antistatic belts and conveyor belt testing procedures.

  2. Establishment of Additional Technical Standards

    Twenty Indian Standards have been established without corresponding earlier standards identified for withdrawal. These cover surface measurement systems, precision instruments, pharmaceutical materials, textiles, refuse collection vehicles and tea classification.

  3. Concurrent Validity of Earlier Standards

    The eight earlier editions listed in the notification will continue to remain in force alongside their revised versions until 6 April 2027. This is particularly relevant for businesses that currently refer to older standards in product specifications, purchase agreements, testing documentation or quality management procedures.

The notification primarily concerns the establishment and withdrawal of Indian Standards. It does not independently announce mandatory BIS certification for all the products covered.

Key Highlights of the BIS Notification 2026

The major points of the notification are:

  • 28 Indian Standards established: The notification covers new and revised specifications and testing methods across multiple sectors.
  • Eight revised standards: Existing standards concerning construction materials, engineering equipment and conveyor belts have been updated.
  • Twenty additional standards: Standards have been introduced for technical applications such as surface metrology, pharmaceuticals, textiles and tea classification, without earlier editions listed for withdrawal.
  • Establishment date: All the standards were established on 6 October 2026.
  • Withdrawal date: Eight superseded Indian Standards are scheduled for withdrawal on 6 April 2027.
  • Transition period: The eight earlier editions will remain in force concurrently with their revised versions until the specified withdrawal date.
  • Sector-wide relevance: The standards may be relevant to manufacturers, exporters, importers, testing laboratories, industrial suppliers and organisations involved in quality assessment.
  • Certification applicability: Businesses must separately determine whether mandatory BIS certification requirements apply to their products.

Important Dates Under the BIS Standards Notification 2026

Particulars Details
Regulatory authority Bureau of Indian Standards
Department Department of Consumer Affairs
Notification date 8 October 2026
Gazette publication 3 November 2026
Gazette number 648
Establishment of standards 6 October 2026
Number of standards established 28
Revised standards with earlier editions 8
Other standards established 20
Withdrawal date of listed older editions 6 April 2027
Governing provision Rule 15(1), BIS Rules, 2018

The establishment date and Gazette publication date are different. Businesses should use the dates specified in the notification when reviewing the status of the relevant Indian Standards.

Which Eight Indian Standards Have Been Revised by BIS in 2026?

BIS has established revised editions of eight Indian Standards covering construction materials, gauging equipment, precision instruments and conveyor belt systems.

The following table provides the details.

New Indian Standard Subject Earlier Standard Withdrawal Date
IS 3115:2026 Lime Based Blocks Specification (Third Revision) IS 3115:1992 6 April 2027
IS 3455:2026 Gauging Practice for Plain Workpieces (Second Revision) IS 3455:1971 6 April 2027
IS 6232:2026 Cast Iron Box Angle Plates Specification (First Revision) IS 6232:1971 6 April 2027
IS 6987:2026 Precision Polygon Specification (First Revision) IS 6987:1973 6 April 2027
IS 15148:2026 / ISO 1813:2025 Electrical Conductivity of Antistatic Belts IS 15148:2015 / ISO 1813:2014 6 April 2027
IS 16365:2026 / ISO 21182:2025 Light Conveyor Belts Determination of Coefficient of Friction IS 16365:2015 / ISO 21182:2013 6 April 2027
IS 17114:2026 / ISO 251:2024 Conveyor Belts with Textile Carcass Widths and Lengths IS 17114:2019 / ISO 251:2012 6 April 2027
IS 17496:2026 / ISO 283:2023 Textile Conveyor Belts Tensile Strength and Elongation Testing IS 17496:2021 / ISO 283:2015 6 April 2027

These revised standards were established on 6 October 2026.

Businesses using the earlier editions should examine the complete revised standards to identify the specific technical changes. The Gazette provides the titles and relevant dates but does not reproduce all the technical requirements.

What Are the 20 Other Indian Standards Established in 2026?

BIS has also established 20 Indian Standards without identifying corresponding earlier Indian Standards for withdrawal. These standards cover technical measurement procedures, industrial equipment, pharmaceutical materials, textiles, waste collection vehicles and tea classification.

A. Surface Texture and Geometrical Product Specifications

A major portion of the notification concerns IS 18431, which covers geometrical product specifications and surface texture measurement. Surface texture measurement is used in precision manufacturing and engineering to assess the characteristics of a product's surface.

The standards established under this series are:

Indian Standard Area Covered
IS 18431 (Part 1):2026 Indication of surface texture
IS 18431 (Part 2):2026 Terms, definitions and surface texture parameters
IS 18431 (Part 6):2026 Classification of methods for measuring surface texture
IS 18431 (Part 72):2026 XML file format X3p
IS 18431 (Part 600):2026 Metrological characteristics for areal topography measuring methods
IS 18431 (Part 601):2026 Design and characteristics of contact stylus instruments
IS 18431 (Part 602):2026 Design and characteristics of confocal chromatic probe instruments
IS 18431 (Part 603):2026 Design and characteristics of phase shifting interferometry instruments
IS 18431 (Part 604):2026 Design and characteristics of coherence scanning interferometry instruments
IS 18431 (Part 605):2026 Design and characteristics of point autofocus probe instruments
IS 18431 (Part 607):2026 Nominal characteristics of confocal microscopy instruments
IS 18431 (Part 700):2026 Calibration, adjustment and verification of areal topography measuring instruments
IS 18431 (Part 701):2026 Calibration and measurement standards for contact stylus instruments

These 13 standards cover several aspects of surface measurement, from terminology and measurement principles to the characteristics and calibration of measuring instruments.

Importance for industrial manufacturers:

Surface measurement can play a role in assessing manufactured components, particularly where surface characteristics affect their intended performance. Precision engineering organisations and testing laboratories may use relevant standards to maintain consistent measurement procedures.

The IS 18431 series may therefore be relevant to businesses operating in:

  • Precision engineering and manufacturing.
  • Industrial component inspection.
  • Surface metrology and measurement.
  • Calibration and testing laboratories.
  • Quality control and dimensional inspection.

Businesses should identify which parts of the series are relevant to their measurement methods rather than assuming that every part applies to every facility.

B. Standards for Precision Measurement Equipment

Two additional Indian Standards address dimensional measuring equipment and measurement uncertainty.

IS 19839:2026 โ€“ Micro meters for External Measurements

IS 19839:2026, corresponding to ISO 3611:2023, covers the design and metrological characteristics of micrometres used for external measurements. Micro meters are widely used in precision engineering to measure dimensions such as the thickness or external diameter of components. The standard may be relevant to manufacturers of measuring instruments, calibration laboratories and industrial quality inspection departments.

IS 19840:2026 โ€“ Coordinate Measuring Machines

IS 19840:2026, corresponding to ISO/TS 23165:2006, provides guidelines for evaluating coordinate measuring machine test uncertainty. Coordinate measuring machines are used to measure the geometric characteristics of manufactured components. Understanding measurement uncertainty can support the interpretation and reliability of measurement results.

Businesses operating coordinate measuring machines should examine the standard where applicable to their measurement and testing activities.

C. Standards for Waste Collection Vehicles

IS 19926:2026 โ€“ Refuse Collection Vehicles

IS 19926:2026, corresponding to ISO 13155:2025, covers vocabulary, classification and requirements for commercial specifications of refuse collection vehicles. Refuse collection vehicles are used in municipal waste management and other waste collection operations.

The establishment of this standard may be relevant to:

  • Refuse collection vehicle manufacturers.
  • Municipal equipment suppliers.
  • Waste management equipment businesses.
  • Organisations preparing technical procurement specifications.
  • Businesses involved in the design and supply of specialised collection vehicles.

The standard provides a reference for terminology, classification and commercial specifications. However, the Gazette notification does not independently introduce a new vehicle registration, approval or certification requirement.

D. Standards for Pharmaceutical and Homoeopathic Products

Two Indian Standards cover materials and products used in pharmaceutical and homoeopathic applications.

IS 19933:2026 โ€“ Anhydrous Calcium Sulphate for Pharmaceutical Use

This standard establishes specifications for anhydrous calcium sulphate intended for pharmaceutical use.

It may be relevant to pharmaceutical material manufacturers, suppliers and testing laboratories working with the substance. Businesses should examine the applicable material specifications and assess their relevance to existing quality documentation.

IS 19935 (Part 1):2026 โ€“ Biochemic Tablets for Homoeopathy

This standard establishes specifications for Calcarea Sulphurica biochemic tablets used in homoeopathy. It may be relevant to manufacturers and testing organisations involved with the specified product. The establishment of these Indian Standards should not be confused with the introduction of new pharmaceutical manufacturing licences.

Businesses must continue to assess their obligations under the applicable drug and pharmaceutical regulatory framework separately.

E. Standards for Textile Testing

IS 19936:2026 โ€“ Biaxial Tensile Properties of Woven Fabrics

IS 19936:2026 concerns the determination of elasticity properties of woven fabrics using a cruciform test piece. The standard is based on ISO 13118:2024, with modifications identified in the Gazette.

Textile testing can involve evaluating how fabric responds to mechanical forces. The standard may be relevant to textile manufacturers, fabric testing laboratories and organisations involved in material performance assessment.

Businesses using relevant tensile testing methods should review the requirements of the newly established standard.

F. Standards for Tea Classification

IS 19937:2026 โ€“ Classification of Tea Types

IS 19937:2026, corresponding to ISO 20715:2023, relates to the classification of tea types. Tea classification helps establish consistent terminology when identifying different categories of tea.

The standard may be relevant to:

  • Tea manufacturers and processors.
  • Tea exporters and importers.
  • Tea testing laboratories.
  • Quality assessment organisations.
  • Businesses involved in tea sourcing and product specifications.

Businesses dealing with tea products may examine the classification standard where relevant to their operations. However, the notification does not establish a new Tea Board registration process, separate tea export licence or additional mandatory product certification.

What Is the Transition Period for Revised BIS Standards?

One of the important provisions of this notification is the concurrent validity of the eight earlier Indian Standards. The revised standards were established on 6 October 2026, but their earlier editions will remain in force until 6 April 2027.

This means the earlier standards continue to have recognised status during the specified period. For example, IS 3115:2026 has been established as the third revision of the specification for lime-based blocks. The earlier IS 3115:1992 will continue in force until its scheduled withdrawal on 6 April 2027. Similarly, the earlier editions of the relevant precision engineering and conveyor belt standards will remain in force until that date.

Why Is the Transition Period Important?

Manufacturers and testing laboratories may already use older Indian Standards in their technical records, inspection procedures and product documentation.

A transition period gives these organisations an opportunity to evaluate the revised editions and determine which documents or procedures may need changes.

During this period, businesses may consider:

  • Identifying technical documents that refer to the earlier standards.
  • Comparing the revised specifications with the previous editions.
  • Assessing whether existing testing procedures need updates.
  • Reviewing supplier and customer specifications.
  • Checking whether product certification arrangements are affected.
  • Planning necessary technical changes before withdrawal of the earlier editions.

The notification does not state that every manufacturer must complete a new BIS certification application by 6 April 2027. Any licensing-related requirements must be assessed separately.

Does the Notification Make BIS Certification Mandatory?

The BIS notification establishes Indian Standards under the Bureau of Indian Standards Rules, 2018. However, the publication or revision of an Indian Standard does not automatically make BIS certification mandatory for every product covered by it.

Indian Standards provide technical references for specifications, testing, quality assessment and other applications. Mandatory BIS certification may apply where a product is covered by an applicable Quality Control Order or another legally enforceable requirement.

Difference Between Establishment of a Standard and Mandatory BIS Certification

Particulars Establishment of an Indian Standard Mandatory BIS Certification
Purpose Establishes technical specifications or methods Requires conformity under an applicable legal framework
Authority Bureau of Indian Standards Applicable regulatory authority and BIS framework
General application Standard may be used for relevant technical purposes Applies to products covered by the relevant mandatory requirement
Certification requirement Not automatically mandatory Required where the applicable law mandates it
Business action Review the relevant standard Fulfil the applicable certification obligations

Before applying for BIS certification, manufacturers and importers should confirm the relevant product category, applicable Indian Standard, certification scheme and any Quality Control Order.

What Is the Impact of the BIS Notification on Manufacturers?

The establishment of revised Indian Standards may affect manufacturers that use the identified specifications in their production or product quality assessment systems.

The actual impact depends on the product, the relevant standard and whether the business is required to follow that standard under a contract, certification scheme or legal requirement.

  1. Review of Product Specifications

    Businesses using the eight revised standards should compare the earlier and updated editions. This helps identify whether the revised requirements affect the specifications currently used for their products.

  2. Review of Testing Methods

    Several notified standards concern testing methods and measurement procedures. Testing laboratories and manufacturers should determine whether their existing procedures are based on older editions. Where the revised standard introduces relevant technical changes, the business may need to update its testing documentation.

  3. Review of Quality Control Documentation

    Manufacturers may refer to Indian Standards in quality manuals, inspection records, product specifications and internal operating procedures. Relevant references should be examined to ensure that the correct standard edition is being used.

  4. Supplier and Procurement Requirements

    Industrial buyers may specify Indian Standards in purchase agreements or technical specifications. Businesses should review whether contracts and procurement documents require updates when an earlier edition is withdrawn.

  5. Review of Certification Requirements

    Where a product is subject to mandatory BIS certification, manufacturers should check whether the revised standard affects their applicable certification requirements. The present notification alone does not establish the detailed licensing procedure for transition between standard editions.

What Is the Impact on Testing and Calibration Laboratories?

Testing and calibration laboratories may be particularly affected by the standards relating to measurement techniques, testing procedures and metrological characteristics. The new IS 18431 series covers different methods and instruments used for surface texture measurement. Other standards address external micrometres, coordinate measuring machines, belt testing and textile testing. Laboratories may need to examine the relevance of these standards to their services.

Important areas for review include:

  • Testing and calibration methods currently followed.
  • Standard editions referenced in laboratory procedures.
  • Measurement equipment specifications.
  • Calibration and verification records.
  • Test report formats and standard references.
  • Staff competence in the relevant procedures.
  • Accreditation scope, where applicable.

The notification does not itself prescribe a universal laboratory accreditation update deadline. Any accreditation-related changes must be assessed under the applicable accreditation requirements.

What Is the Impact on Importers and Exporters?

Businesses engaged in international trade may also need to consider the revised Indian Standards where their products, supply agreements or regulatory requirements refer to them.

For Importers

Importers should determine whether the products being imported are covered by an applicable mandatory BIS certification requirement.

Where an Indian Standard is referenced in a relevant Quality Control Order, businesses should verify how the revised standard affects their obligations. The notification should not be interpreted as automatically making all products covered by the 28 standards subject to compulsory BIS registration or certification.

For Exporters

Exporters may need to review Indian Standards where these are specified by customers, contracts or product quality requirements. The relevance of the standards depends on the product and the applicable export-market requirements.

The BIS notification does not independently introduce new export restrictions or export licensing obligations.

What Happens After 6 April 2027?

According to the Gazette notification, the eight earlier Indian Standards identified in the Schedule are scheduled to be withdrawn on 6 April 2027.

After their withdrawal, those older editions will no longer remain established Indian Standards under the notification's concurrent validity arrangement. Businesses relying on the affected standards should therefore examine the revised editions in advance.

For example:

  • IS 3115:1992 is scheduled to be withdrawn in favour of IS 3115:2026.
  • IS 3455:1971 is scheduled to be withdrawn in favour of IS 3455:2026.
  • IS 15148:2015 is scheduled to be withdrawn in favour of IS 15148:2026.
  • IS 17496:2021 is scheduled to be withdrawn in favour of IS 17496:2026.

The same withdrawal date applies to all eight earlier standards listed in the notification. Businesses should also monitor any subsequent amendments, certification directions or regulatory notices that may affect their obligations.

Compliance Actions Businesses Should Take Following the Notification

Manufacturers, importers, exporters, suppliers and laboratories can use the following approach to assess the notification.

Step 1: Identify Relevant Indian Standards

Review the notified list and identify standards connected with the business's products, manufacturing activities or testing operations.

Step 2: Obtain the Applicable Standards

Obtain the complete relevant Indian Standard through an authorised BIS source. The Gazette notification provides standard titles and dates but does not contain the complete technical specifications.

Step 3: Compare the Earlier and Revised Editions

For the eight revised standards, compare the new and earlier editions. Identify any relevant differences in specifications, measurement procedures, testing methods or documentation.

Step 4: Review Existing Technical Documentation

Check whether existing documents refer to the earlier editions. This may include product specifications, test methods, supplier requirements, quality procedures and purchase contracts.

Step 5: Verify BIS Certification Applicability

Determine whether the relevant product is covered by mandatory BIS certification requirements. Review any applicable Quality Control Order and relevant BIS certification directions.

Step 6: Update Procedures Where Necessary

Where the revised standard affects business operations, prepare suitable changes to technical documentation, quality systems or testing procedures.

Step 7: Review the Transition Date

For standards with earlier editions scheduled for withdrawal, consider the 6 April 2027 withdrawal date while planning technical updates.

Step 8: Maintain Supporting Records

Maintain records of the standards reviewed, the applicability assessment and any relevant changes. This can help businesses demonstrate how they have evaluated the revised technical requirements.

Important Clarifications for Businesses

The BIS notification should be interpreted according to its stated scope.

Question Position Under the Notification
Have 28 Indian Standards been established? Yes
Are all 28 standards effective from the same establishment date? Yes, 6 October 2026
Do eight standards replace earlier editions? Yes
Will those earlier editions remain in force temporarily? Yes, until 6 April 2027
Are the remaining 20 standards listed with predecessors for withdrawal? No
Does the notification introduce universal mandatory BIS certification? No
Does it prescribe a new BIS certification fee? No
Does it introduce a new licence application process? No
Does it specify penalties for non-compliance? No
Does it reproduce the complete technical requirements? No

These distinctions are important because the establishment of an Indian Standard and the introduction of a mandatory legal certification requirement are not the same regulatory action.

How Can Corpseed Help Businesses with BIS Certification and Compliance?

Businesses dealing with industrial products, technical standards and mandatory certification requirements may need assistance in understanding which regulatory provisions apply to their operations.

Corpseed provides regulatory compliance assistance to manufacturers, importers and businesses seeking BIS certification services in India.

Corpseed can assist businesses with:

  • BIS applicability assessment: Identifying relevant Indian Standards and examining whether mandatory BIS certification requirements apply to the product.
  • Regulatory documentation: Supporting the preparation and review of documents required for applicable certification procedures.
  • BIS certification applications: Assisting businesses with application preparation and submission under the relevant BIS certification scheme.
  • Product testing coordination: Helping businesses understand applicable testing requirements and coordinate with relevant testing facilities.
  • Regulatory compliance support: Assisting with the review of applicable product quality and certification requirements.
  • Ongoing compliance guidance: Supporting businesses in understanding regulatory developments, standard revisions and related documentation requirements.

Businesses seeking assistance with BIS certification or applicable product quality requirements can contact Corpseed for professional guidance.

Conclusion

The Bureau of Indian Standards has established 28 Indian Standards through its notification dated 8 October 2026, covering construction materials, conveyor belts, precision engineering, measurement equipment, pharmaceutical materials, textiles, refuse collection vehicles and tea classification. All 28 standards were established on 6 October 2026. Eight earlier editions will continue to remain in force concurrently until 6 April 2027, while no earlier standards are listed for withdrawal against the remaining 20 standards.

The notification is relevant to businesses that rely on Indian Standards for manufacturing, product specifications, testing, calibration and quality assessment. Manufacturers, laboratories and suppliers should examine the applicable standards, review the revised technical requirements and determine whether changes to their current procedures are necessary. Where mandatory BIS certification requirements apply, businesses should separately verify their regulatory obligations under the relevant certification scheme and Quality Control Order.

Document Preview

Embedded reference document

Fullscreen โ†—

Related

Explore more updates from the same department.

Call