Corpseed

DGTR Aluminium Foil Anti-Dumping Duty 2026: Sunset Review Recommends Five-Year Continuation

Department: Department of Commerce and IndustryAuthority: Directorate General of Trade Remedies (DGTR)Publish: Applicable: 14-09-2026Import/ExportImport Licensing Compliance

Quick note

Below is the official summary and the reference document preview. Use “Open PDF” for full screen view.

Schedule a Call Back

IN +91

Summary

Importers of aluminium foil have an important trade-remedy development to track. The Directorate General of Trade Remedies (DGTR) has completed its sunset review covering specified aluminium foil of 80 microns and below originating in or exported from China PR, Indonesia, Malaysia and Thailand.

After examining dumping, injury to the Indian industry, import prices, production capacity, third-country exports and the likelihood of dumped imports continuing or returning, the Authority reached an affirmative finding. Its recommendation is to continue the existing definitive anti-dumping duties for another five years at the rates given in the final duty table.

This is where one distinction that business firms must understand legally comes into play. They are DGTR’s final decisions and recommendations. They must not be regarded as separate Customs notifications by which the Central Government enforces the anti-dumping duty. It is, therefore, important that importers monitor the relevant actions from the Ministry of Finance/Customs before regarding September 14, 2026 as the start date for the new five-year levy.

A sunset review is different from a new anti-dumping investigation. The focus is not simply on whether dumping exists today; DGTR mainly examines what is likely to happen if the existing duty is allowed to expire.

DGTR Aluminium Foil Sunset Review 2026 at a Glance

Particular Verified Detail
Authority Directorate General of Trade Remedies (DGTR)
Ministry Ministry of Commerce and Industry, Department of Commerce
Document Final findings in a sunset review investigation
Case No. AD (SSR-12/2025)
File No. 7/19/2025-DGTR
Gazette Gazette of India, Extraordinary, Part I—Section 1, No. 248
Date of final findings 14 September 2026
Product Aluminium Foil 80 Microns and Below, subject to listed exclusions
Countries China PR, Indonesia, Malaysia and Thailand
Customs Heading 7607
Review type Sunset Review
Period of Investigation 1 April 2024 to 31 March 2025
Injury period 2021-22, 2022-23, 2023-24 and POI
Existing duty background Customs Notification No. 51/2021-Customs (ADD), dated 16 September 2021
Main finding Likelihood of continuation of dumping and continuation/recurrence of injury if duty ceases
DGTR recommendation Continue definitive anti-dumping duties
Recommended period Further period of five years
Recommended rates Existing producer/country-specific rates in the final duty table
Effective date of continued duty Not to be assumed from the final findings alone; relevant Customs notification should be checked
Designated Authority Amitabh Kumar
Further procedure Appeal against the Central Government order lies before CESTAT

The Gazette identifies the matter as Case No. AD (SSR-12/2025), dated 14 September 2026, and the English portion records File No. 7/19/2025-DGTR.

What Is the 2026 Aluminium Foil Sunset Review About?

Anti-dumping duty is not meant to run indefinitely without review. Under the applicable law, a definitive duty normally comes to an end after the prescribed period unless a review shows that removing it is likely to result in dumping and injury continuing or happening again.

That is the question DGTR examined here.

The existing measure arose from an earlier investigation involving aluminium foil from China PR, Malaysia, Thailand and Indonesia. Before that five-year measure reached the end of its life, domestic producers requested a sunset review.

The present review was initiated on 29 September 2025 under Section 9A(5) of the Customs Tariff Act read with Rule 23 of the Anti-Dumping Rules.

The practical question was:

If the existing anti-dumping duty disappears, are dumped imports likely to continue or return in a manner that again harms the Indian aluminium foil industry?

DGTR ultimately answered that question in the affirmative.

Background of Anti-Dumping Duty on Aluminium Foil in India

This case makes more sense when the earlier proceedings are viewed separately instead of treating all aluminium foil measures as one investigation.

Original Aluminium Foil Investigation

The Authority initiated an investigation on 15 December 2015 covering aluminium foil ranging from 5.5 microns to 80 microns from China PR.

Final findings were issued on 10 March 2017, following which the Ministry of Finance imposed duty through Notification No. 23/2017-Customs (ADD), dated 16 May 2017.

2021 Anti-Dumping Duty on Aluminium Foil 80 Microns and Below

A separate investigation was initiated on 20 June 2020 into imports of aluminium foil 80 microns and below from China PR, Malaysia, Thailand and Indonesia.

Because another duty already covered China-origin foil between 5.5 and 80 microns at that time, the China portion of this proceeding essentially covered foil up to 5.5 microns.

DGTR issued final findings on 18 June 2021. The Ministry of Finance then imposed definitive duties through Customs Notification No. 51/2021-Customs (ADD), dated 16 September 2021, for five years.

Mid-Term Review of the Thailand Duty

Initiation of the Mid-term Review took place on 29 March 2024.

This review looked at whether the change in the situation warranted the re-quantification of the duty levied on Thai manufacturers. The final results released on 26 March 2025 showed that no re-quantification was necessary.

Separate Proceedings of China Aluminium Foil

A separate proceeding involving Chinese PR's aluminium foil was launched on 21 March 2024.

This investigation excluded aluminium foil imported from China PR that is less than 5.5 microns since it was included in the 2021 list of products.

The Gazette mentions a provisional customs duty decision taken in March 2025 and a final anti-dumping duty decision made through Notification No. 15/2025-Customs (ADD) on 19 June 2025.

Current Sunset Review

This sunset review process was launched on 29 September 2025.

DGTR also recorded that a separate countervailing duty investigation involving aluminium foil 80 microns and below from China PR was initiated on the same date.

Key Regulatory Timeline

Date Development Authority Why It Matters
15 Dec 2015 Original China aluminium foil investigation initiated DGAD/DGTR predecessor Covered 5.5-80 micron foil
10 Mar 2017 Final findings Authority Recommended ADD
16 May 2017 Notification 23/2017-Customs (ADD) Ministry of Finance Duty imposed
20 Jun 2020 Investigation on aluminium foil 80 microns and below initiated DGTR Covered four subject countries
18 Jun 2021 Final findings DGTR Definitive duty recommended
16 Sep 2021 Notification 51/2021-Customs (ADD) Ministry of Finance Five-year duty imposed
21 Mar 2024 Separate China investigation initiated DGTR Different China product scope
29 Mar 2024 Thailand MTR initiated DGTR Examined re-quantification
17 Mar 2025 Notification 02/2025-Customs (ADD) Ministry of Finance Preliminary China measure recorded in Gazette
20 Mar 2025 China final findings DGTR Definitive duty recommended
26 Mar 2025 Thailand MTR findings DGTR No re-quantification required
19 Jun 2025 Notification 15/2025-Customs (ADD) Ministry of Finance Definitive China measure
29 Sep 2025 Present sunset review initiated DGTR Review of 2021 measure
29 Sep 2025 Parallel CVD investigation initiated DGTR Separate trade-remedy proceeding
3 Sep 2026 Disclosure statement issued DGTR Essential facts disclosed
14 Sep 2026 Final sunset-review findings DGTR Five-year continuation recommended

Regulatory Framework Governing the Sunset Review

Customs Tariff Act, 1975

India's anti-dumping framework operates under the Customs Tariff Act, 1975 together with the Anti-Dumping Rules.

Anti-dumping duty is intended to address injury caused by goods being exported to India at dumped prices. It is not simply an additional import tariff imposed because imported goods are inexpensive.

Section 9A(5)

Section 9A(5) deals with the duration of anti-dumping measures.

In simple terms, a definitive anti-dumping duty ordinarily ends after five years unless a review concludes that allowing it to expire is likely to cause dumping and injury to continue or recur.

Anti-Dumping Rules, 1995

The Customs Tariff (Identification, Assessment and Collection of Anti-Dumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995 lay down rules about the investigation process, dumping and injury determination and other requirements.

Rule 23 and Sunset Review

Rule 23 provides the framework for review proceedings.

The present sunset review therefore had a forward-looking purpose: DGTR had to examine what could reasonably happen after the duty disappears, not merely repeat the findings of the original investigation.

Product Under Consideration: Aluminium Foil 80 Microns and Below

The Product Scope encompasses aluminium foil having a thickness of 80 microns and below, within allowable tolerances, either printed or non-printed and with backing either of paper, paperboard, plastic, or other packaging material.

Aluminium foil is produced from foil stock through further rolling. It may then be sold as bare foil or printed, laminated or otherwise converted depending on its intended use.

The Gazette mentions uses in areas such as:

  • pharmaceutical packaging,
  • processed-food packaging,
  • cigarette wrapping,
  • tobacco packaging, and
  • other foil applications.

DGTR also used a Product Control Number, or PCN, system to compare like product categories more fairly. The PCN framework distinguished between product types, thickness ranges, and bare/converted foil.

The final scope, however, is controlled by the PUC description and its exclusions—not simply by the PCN label.

Which Countries Are Covered by the Review?

The subject countries are:

Country Treatment Under Review
China PR Covered, but with an important thickness-related exclusion
Thailand Covered; producer-specific rates exist
Malaysia Covered
Indonesia Covered

An importer cannot safely determine the duty merely by asking, "Which country did I buy this from?"

The duty table may require a review of:

  • country of origin,
  • country of export,
  • manufacturer/producer,
  • exporter,
  • product specifications, and
  • whether the goods fall within an exclusion.

Special Treatment of Aluminium Foil Originating in China

The China position deserves separate attention because not every China-origin aluminium foil product up to 80 microns belongs to this sunset review.

The final PUC expressly excludes:

Aluminium foil of thickness ranging from 5.5 microns to 80 microns originating in China.

As a result, the China portion of this sunset review is materially narrower than a simple reading of the phrase "80 microns and below" might suggest.

DGTR explains that the China-origin segment above 5.5 microns is dealt with under the separate China anti-dumping proceeding. For market-demand analysis, those imports were considered separately as "other countries"; that did not bring them back inside the PUC for this review.

This distinction is important for import compliance services, because applying the wrong aluminium foil proceeding can result in an incorrect duty mapping even if the HS code appears to be the same.

Products Specifically Excluded From the Anti-Dumping Duty Scope

DGTR kept a detailed exclusion list. Importers should review it against technical product specifications before deciding that a shipment is covered.

Excluded Product Key Condition/Description Practical Meaning
China-origin aluminium foil 5.5-80 microns Originating in China PR Falls outside this sunset-review PUC
Alu Alu Laminate Express exclusion Do not automatically map to this duty
Ultra-Light Gauge Converted Express exclusion Converted ULG foil remains outside scope
Aluminium Foil Composite Express exclusion Composite products require separate classification review
Capacitor foil Width below 500 mm Width condition is important
Etched or formed aluminium foils Express exclusion Product processing matters
Aluminium composite panel Express exclusion Not covered merely because aluminium foil is present
Clad with compatible non-clad aluminium foil Corrosion-resistant bonded material for specified cooling/industrial applications Technical product construction should be checked
Aluminium foil for beer bottle Express exclusion End-use/product type specifically carved out
Aluminium-Manganese-Silicon based alloys Clad or unclad Alloy composition matters
Adhesive tapes Express exclusion Outside PUC
Colour-coated aluminium foil Express exclusion Coating must be reviewed
Polyurethane-coated aluminium foil One or both sides, irrespective of colour, shape or coating Specifically confirmed as excluded

DGTR specifically clarified that polyurethane-coated aluminium foil continues to remain outside the scope.

The complete exclusion list is also repeated below the final duty table.

Customs Tariff Classification and HS Codes Covered

The product is classified under Customs Tariff Heading 7607.

The final findings identify the following tariff subheadings:

Tariff Subheading

  • 76071190
  • 76072090
  • 76072010
  • 76071110
  • 76071999
  • 76071991
  • 76071995
  • 76071910
  • 76071994
  • 76071993
  • 76071992

However, DGTR expressly states that the Customs classification is indicative and not binding on the PUC scope.

That means an HS code alone is not enough to determine anti-dumping duty liability.

Why Product Description Matters More Than the HS Code

Two products may enter under the same broad Customs heading but receive different treatment if one falls within the PUC and the other falls within an exclusion.

The importer needs to verify the following items:

  • thickness of the foil;
  • composition of the goods;
  • coating, if present;
  • width of the foil when the exclusion is based on width;
  • whether it is a bare or converted foil;
  • construction of the foil;
  • country of origin;
  • country of export;
  • producer/manufacturer;
  • exporter; and
  • the precise description used in the applicable trade-remedy notification.

This is where a product-level customs compliance review is more useful than simply matching an eight-digit tariff code.

Period of Investigation and Injury Investigation Period

The Period of Investigation (POI) was:

1 April 2024 to 31 March 2025

The injury analysis covered:

  • 2021-22
  • 2022-23
  • 2023-24
  • the POI

DGTR used transaction-wise import data from DG Systems for its analysis.

The longer injury period allowed the Authority to see whether changes in production, prices, sales, profits and imports were temporary movements or part of a wider trend.

Who Constituted the Domestic Industry?

Six Indian producers filed the application:

  • Hindalco Industries Ltd.
  • LSKB Aluminium Foils Pvt. Ltd.
  • Ravi Raj Foils Ltd.
  • Shree Venkateshwara Electrocast Pvt. Ltd.
  • Shyam Sel & Power Ltd.
  • SRF Altech Ltd.

LSKB Aluminium Foils and SRF Altech disclosed some self-imports. DGTR found those imports insignificant compared with their production and did not treat them as sufficient reason to exclude the companies from the domestic industry.

The remaining applicants had not imported the subject goods and were not found related to relevant importers or exporters.

DGTR ultimately held that the applicant companies constituted the domestic industry under Rule 2(b) and represented a major proportion of Indian production.

Participation of Producers, Exporters, Importers and Users

Several overseas producers/exporters participated in the proceedings.

The responding entities listed by DGTR included:

  • Dingheng New Materials Co. Ltd.
  • Granges Aluminium (Shanghai) Ltd.
  • Jiangsu Fengyuan Aluminium Mstar Technology Co. Ltd.
  • Jiangsu Zhongji Lamination Materials Co. Ltd.
  • Loften (Thailand) Co. Ltd.
  • Peixian Fengyuan Import and Export Trade Co. Ltd.
  • Shanghai Sunho Aluminium Foil Co. Ltd.

No Indian importer/user filed an importer questionnaire response or substantive importer/user submission.

DGTR also issued an Economic Interest Questionnaire. Responses were received from the domestic industry and certain overseas producers/exporters.

Malaysia and Indonesia had no cooperating producer/exporter in the dumping analysis, so DGTR used facts available for those countries.

What Did DGTR Examine in the Sunset Review?

The Authority did not base the review on one number.

Its examination included:

  • normal value,
  • export price,
  • dumping margin,
  • injury margin,
  • price undercutting,
  • price suppression,
  • sales and production,
  • capacity utilisation,
  • market share,
  • profitability,
  • cash profit,
  • return on capital employed,
  • inventories,
  • foreign production capacity,
  • export orientation,
  • third-country exports,
  • future diversion risk,
  • Indian market attractiveness, and
  • public interest.

Where parties supplied commercially sensitive data, the Gazette uses ***. Those figures should remain confidential and should not be reconstructed.

DGTR Findings on Dumping

Dumping, in simple terms, occurs when the export price to India is lower than the legally determined "normal value" after the prescribed comparison and adjustments.

For China PR, none of the responding producers/exporters submitted the market-economy questionnaire required for the Authority's normal-value examination. DGTR therefore determined normal value using the methodology recorded under Annexure I and constructed it on an adjusted domestic-industry cost basis with reasonable selling, general and administrative expenses and profit.

Thailand's participating producers were examined using their verified information. Malaysia and Indonesia were assessed using facts available because no producer/exporter from those countries participated.

Dumping Margin Ranges Recorded in the Final Findings

Country / Producer Dumping Margin Range
Jiangsu Fengyuan Aluminium Mstar Technology Co. Ltd., China 15-25%
Shanghai Sunho Aluminium Foil Co. Ltd., China 10-20%
Jiangsu Zhongji Lamination Materials Co. Ltd., China 25-35%
Other China producers 25-35%
Loften (Thailand) Co. Ltd. 25-35%
Dingheng New Materials Co. Ltd., Thailand 0-10%
Other Thailand producers 45-55%
Indonesia – others 40-50%
Malaysia – others 0-10%

The underlying normal values, export prices and absolute margins were treated as confidential in the Gazette.

DGTR Findings on Injury to the Domestic Industry

The injury picture was mixed on volume and much weaker on financial performance.

Demand grew strongly. Indian production, domestic sales and capacity also increased. At the same time, profitability and return indicators deteriorated.

Selected Injury Indicators

Indicator 2021-22 POI 2024-25 Direction
Indian demand 162,637 MT 211,511 MT Increased
Subject-country imports 43,899 MT 14,751 MT Declined
Thailand imports 26,973 MT 13,724 MT Declined but remained substantial
Domestic industry sales 39,579 MT 67,425 MT Increased
Average inventory 1,724 MT 3,713 MT Increased
Employees 1,164 1,644 Increased

DGTR recognised that subject-country imports had fallen. It nevertheless found imports from Thailand remained significant and examined their prices separately.

On financial performance, profitability declined sharply, losses appeared in 2023-24, and return on capital remained weak. In its conclusion, the Authority recorded ROCE of only 0.32% in the POI.

Price Undercutting and Price Suppression — What Did DGTR Find?

Price Undercutting

Price undercutting asks whether imported goods are reaching the Indian market below the comparable selling price of domestic producers.

For the POI, DGTR recorded the following ranges:

Source Price Undercutting Range
Thailand 10-20%
Malaysia Negative
Indonesia 20-30%
China PR below 5.5 microns Negative
Subject countries overall 10-20%

This meant Thailand and Indonesia were found to be undercutting domestic prices during the POI.

Price Suppression

Price suppression is slightly different.

It occurs where domestic producers are unable to increase their selling prices enough to reflect rising costs because import prices keep pressure on the market.

DGTR found the domestic industry's indexed cost of sales increased from 100 to 114, while its indexed selling price moved from 100 to only 103 over the injury period.

The Authority therefore concluded that dumped imports had caused price suppression.

Likelihood of Continuation or Recurrence of Dumping and Injury

This is the most important part of a sunset review.

The question is not simply whether imports fell while duty was in force. The Authority must consider what could happen after the measure disappears.

Import Trends From the Subject Countries

Imports from the four subject countries fell over the injury period.

However, DGTR observed that Thailand remained a substantial source. Indonesia's imports had fallen to 73 MT in the POI, while Malaysian imports were only 44 MT. China-origin foil below 5.5 microns stood at 909 MT during the POI.

DGTR also looked at longer-term source shifts between China and Thailand. Its findings state that the import pattern suggested a shift in sourcing after trade measures changed.

Foreign Production Capacity

The domestic industry placed public-domain information on record showing substantial production capacity among Chinese producers.

DGTR noted that the combined capacities identified on record were much larger than Indian demand. The Authority considered this relevant even though participating exporters argued that their own capacities had not increased.

Chinese Export Orientation

The domestic industry submitted that China exported around 1.56 million MT of aluminium foil in 2024, which the Authority noted was around eight times Indian demand.

DGTR considered the scale of China's export activity when assessing whether surplus production could be directed towards India if measures expired.

Price Pressure Without the Duty

Thailand-origin imports were found to be undercutting Indian prices even after adding the existing anti-dumping duty.

DGTR therefore reasoned that undercutting could become stronger if the duty disappeared.

Third-Country Export Behaviour

The Authority also examined export data supplied by responding producers.

For example, the reported share of third-country exports priced below the India export price was:

  • Jiangsu Zhongji: 40-50%
  • Shanghai Sunho: 90-100%
  • Jiangsu Fengyuan: 70-80%
  • Loften Thailand: 30-40%
  • Dingheng Thailand: 10-20%

Other values were confidential. DGTR considered these patterns while assessing price attractiveness and the possibility of redirected exports.

Domestic Industry Vulnerability

DGTR's position was that better production and sales figures did not automatically mean the industry could withstand expiry of the measure.

The Authority noted that:

  • selling prices remained below cost of sales from 2023-24,
  • profitability weakened,
  • inventories increased,
  • return on capital remained low, and
  • Thailand continued to exert price pressure.

It therefore found continued vulnerability if the duty were removed.

Why DGTR Recommended Continuing the Anti-Dumping Duty

The recommendation rests on several findings taken together.

DGTR concluded that:

  • dumping margins remained positive;
  • Thailand and Indonesia were undercutting Indian prices during the POI;
  • dumped imports had caused price suppression;
  • financial performance had deteriorated;
  • Thailand remained a significant import source;
  • foreign export capacity and third-country export behaviour supported a future-likelihood assessment;
  • the Indian industry remained vulnerable; and
  • allowing the duty to cease was likely to result in continuation of dumping and continuation or recurrence of injury.

The Authority therefore recommended keeping the measure in place rather than allowing it to expire.

What Has DGTR Recommended in the 2026 Final Findings?

DGTR has recommended continuation of the existing definitive anti-dumping duties at the rates contained in the final duty table for another five years.

The recommendation applies to covered imports of the subject goods originating in or exported from China PR, Thailand, Malaysia and Indonesia, subject to the detailed product exclusions and origin/export combinations in the duty table.

Recommendation vs Final Levy

The distinction matters.

DGTR investigates and recommends. The Central Government, through the Ministry of Finance/Customs framework, gives effect to an anti-dumping levy.

Businesses should therefore avoid treating the DGTR final-findings date itself as the fresh duty-effective date unless the relevant Customs notification establishes that position.

Has the Anti-Dumping Duty Already Been Extended for Five Years?

The attached DGTR final findings recommend a five-year continuation; they should not, by themselves, be treated as the separate Customs notification implementing that recommendation.

For import planning, businesses should check the subsequent Ministry of Finance/Customs notification and its effective-date provisions.

This distinction is particularly important for shipments arriving around the end of the earlier measure.

Country-Wise and Producer-Wise Anti-Dumping Duty Recommended

The following rates are taken from the final DGTR duty table.

All amounts are USD per MT.

Country of Origin Country of Export Producer/Exporter Recommended ADD
China PR Any country including China PR M/s Jiangsu Zhongji Lamination Materials Co., Ltd. USD 506.81/MT
China PR Any country including China PR M/s Shanghai Sunho Aluminum Foil Co., Ltd. USD 398.45/MT
China PR Any country including China PR M/s Jiangsu Fengyuan Aluminium Mstar Technology Co., Ltd. USD 510.24/MT
China PR Any country including China PR Any producer other than Sl. No. 1-3 USD 976.99/MT
Any country other than China PR, Indonesia, Malaysia and Thailand China PR Any USD 976.99/MT
Thailand Any country including Thailand M/s Dingheng New Materials Co., Ltd. USD 100.07/MT
Thailand Any country including Thailand M/s Loften (Thailand) Co., Ltd. USD 93.53/MT
Thailand Any country including Thailand Any producer other than Sl. No. 6-7 USD 339.93/MT
Any country other than China PR, Indonesia, Malaysia and Thailand Thailand Any USD 339.93/MT
Malaysia Any country other than Malaysia Any USD 850.45/MT
Any country other than China PR, Indonesia, Malaysia and Thailand Malaysia Any USD 850.45/MT
Indonesia Any country other than Indonesia Any USD 422.28/MT
Any country other than China PR, Indonesia, Malaysia and Thailand Indonesia Any USD 422.28/MT

The duty table covers Heading 7607 and must be read together with the PUC description and exclusion note. The Gazette expressly states that Customs classification is only indicative.

Why DGTR Did Not Increase the Anti-Dumping Duty on Thailand

The domestic industry asked DGTR to enhance the duty applicable to Thailand. That request was not accepted.

DGTR referred to the earlier mid-term review, where it had examined whether circumstances had changed sufficiently and permanently to justify re-quantification. That review did not establish lasting changed circumstances.

In the sunset review, DGTR considered the newly calculated dumping and injury margins mainly for deciding the likelihood of continuation or recurrence. It then decided to continue the duty rates that came from the original investigation rather than use the review to raise the Thai rates.

The Authority specifically recorded that the request for enhancement of Thailand's duty was not accepted, while the responding producers/exporters' request to retain their original individual rates was accepted.

This means the recommended rates remain:

  • Dingheng New Materials Co., Ltd.: USD 100.07/MT
  • Loften (Thailand) Co., Ltd.: USD 93.53/MT
  • Other Thai producers: USD 339.93/MT

What Happens to Existing Individual Exporter Duty Rates?

The final duty structure does not place every exporter from the same country at one common rate.

For China and Thailand, named producers have specific rates.

That makes supplier identification crucial.

Before calculating landed cost, an importer should confirm:

  • legal name of manufacturer,
  • plant/entity that actually produced the goods,
  • exporter shown on documents,
  • country of origin,
  • country of export, and
  • whether the required commercial invoice declaration is available.

A purchase contract referring only to "Chinese aluminium foil" or "Thai aluminium foil" is not enough for a reliable duty assessment.

Commercial Invoice Declaration Requirement for Individual Duty Rates

The producer-specific rate is not available merely because the supplier's name appears in the duty table.

DGTR has attached a documentation condition to individual company rates.

A valid commercial invoice must be presented to Customs and must include the prescribed declaration. It must be:

  • dated,
  • signed by an official of the entity issuing the invoice,
  • identify that official by name and function, and
  • certify the manufacturer of the covered volume of aluminium foil exported to India.

Customs authorities can still carry out their own verification under Customs law.

What Happens If the Prescribed Invoice Declaration Is Missing?

If the required invoice is not produced, the final findings state that the applicable "all other" rate will apply.

That can make a significant commercial difference.

A procurement team dealing with a named producer should therefore not leave invoice wording until the shipment has already arrived.

The declaration requirement should be built into:

  • purchase-order instructions,
  • Supplier on-boarding,
  • Documentation check before shipment,
  • Customs documentation procedures, and
  • Broker communication.

Here are two things where the help of customs documentation and the document check before shipment can prevent unnecessary duty rate errors.

Public Interest and Impact on Downstream Industries

There were two clearly different positions before DGTR.

Concerns Raised by Other Interested Parties

Other interested parties argued that continuation or enhancement could:

  • increase input costs,
  • reduce sourcing options,
  • place additional cost on downstream industries, and
  • make users more dependent on domestic suppliers.

They also pointed to falling imports and improving domestic production indicators.

These were submissions by interested parties, not conclusions adopted automatically by DGTR.

Domestic Industry's Position

The domestic industry argued that the impact on downstream users was relatively limited.

It relied on previous quantified estimates ranging from 0.026% to 4.36% depending on the downstream application. These numbers came from the domestic industry's submission and should not be presented as independently measured current costs for every downstream company.

DGTR's Assessment

DGTR noted that no importer/user had filed evidence quantifying an adverse effect of the existing duty on its own operations.

The Authority also observed that the Indian aluminium foil industry had expanded, with the number of producers rising from around 12 in 2008 to almost 31 in 2024-25, and that domestic capacity was available.

DGTR ultimately concluded that continuation was in the public interest.

That conclusion should be understood as DGTR's public-interest determination. It does not mean every individual importer or user will face zero cost impact.

Impact on Aluminium Foil Importers in India

Importers are likely to feel the practical effect first because the duty calculation depends on more than a tariff heading.

Product-Scope Checks Become Essential

A shipment may be covered, excluded, or subject to another trade-remedy proceeding depending on thickness, coating, and origin.

Supplier Choice Can Change Landed Cost

China and Thailand have named producer rates as well as significantly higher "other producer" rates.

Not updating the calculation for duty while switching the supplier will have an effect on the procurement cost.

Both Origin and Export Country Are Important

There are examples in the duty table where the origin of the goods is not from the subject countries, but the export country is one of them.

Teams handling import compliance services should therefore check both fields instead of relying only on the supplier's address.

Invoice Controls Matter

For individual producer rates, the prescribed invoice declaration becomes part of duty-rate compliance.

Procurement Systems May Need Updating

Importer ERP or vendor-master records should ideally capture:

  • producer,
  • exporter,
  • origin,
  • export country,
  • product thickness,
  • technical specification,
  • applicable ADD rate, and
  • supporting declaration status.

Impact on Foreign Manufacturers and Exporters

Foreign suppliers selling covered aluminium foil into India should pay close attention to documentary consistency.

For named producers, a specific rate can be commercially meaningful. But the benefit of that rate depends on the supporting invoice condition.

Therefore, overseas manufacturers must ensure that:

  • the name of the manufacturer matches the proper duty entry;
  • the origin information is accurate;
  • invoices contain the prescribed substance; and
  • the Indian importer receives documents before Customs filing.

A mismatch between sales documents and the actual producer may lead Customs to examine whether the individual rate can be used.

Impact on Indian Aluminium Foil Manufacturers

For Indian producers, continuation of the measure preserves the trade-remedy protection DGTR considered necessary against dumped imports.

The final findings also record that new domestic producers entered the market and capacity expanded while duties were in place.

Volume indicators such as production and domestic sales improved. But DGTR found that price and profitability indicators remained weak, which formed part of its reasoning for continuing the measure.

Continuation does not guarantee higher profits, greater market share or better capacity utilisation. Those outcomes will continue to depend on market demand, cost structures, competition and purchasing behaviour.

Impact on Pharmaceutical and Food Packaging Businesses

Pharmaceutical packaging and food packaging are important downstream uses of aluminium foil.

Businesses in these sectors may not themselves be the importer, but import duty can still affect them indirectly where suppliers pass part of the landed cost through the value chain.

Procurement teams should review:

  • whether the foil they purchase actually falls within the PUC;
  • whether any technical exclusion applies;
  • domestic and imported sourcing options;
  • supplier-specific rates;
  • contract price-adjustment clauses; and
  • inventory requirements.

Pharmaceutical blister packs, strip packs and flexible packaging were specifically discussed during the public-interest examination.

Impact on Other Downstream Aluminium Foil Users

The Gazette also discusses end uses that include:

  • household foil,
  • flexible packaging,
  • semi-rigid containers,
  • cigarette/tobacco packaging,
  • capacitor applications, and
  • battery applications.

However, end-use alone should not decide coverage.

For example, certain capacitor foil is expressly excluded based on width. Beer-bottle foil is also excluded. Businesses need to compare the actual technical product against the exclusion list rather than relying on a broad industry category.

How This Sunset Review Interacts With Other Aluminium Foil Trade Remedies

Several aluminium foil proceedings exist at the same time.

Proceeding Product/Country Nature Status Recorded in Gazette Why It Matters
2017 China measure 5.5-80 micron China foil ADD Earlier measure imposed in 2017 Historical product-scope background
2021 four-country proceeding Aluminium foil 80 microns and below ADD Existing measure under sunset review Main subject of 2026 final findings
Thailand MTR Thailand producers Mid-term review Final findings March 2025; no re-quantification Relevant to enhancement request
Separate China investigation China foil excluding below 5.5 micron ADD Definitive duty recorded as imposed in June 2025 Explains China scope split
China CVD investigation Aluminium foil 80 microns and below from China Countervailing duty Initiated 29 September 2025 Separate subsidy-related trade remedy
2026 sunset review China PR, Thailand, Malaysia, Indonesia ADD review Continuation recommended Current proceeding

They should not be mixed.

The ADD and CVD proceedings deal with different trade-remedy questions. One should not be treated as a substitute for the other.

Sunset Review vs Mid-Term Review: What Is the Difference Here?

Sunset Review

The main question is:

What is likely to happen if the anti-dumping duty expires?

It is a forward-looking test centred on continuation or recurrence of dumping and injury.

Mid-Term Review

The question is different:

Have circumstances changed sufficiently and on a lasting basis to justify changing an existing measure before it expires?

DGTR expressly rejected the argument that its Thailand mid-term review automatically determined the sunset-review result. The two reviews have different legal purposes and were based on different investigation periods and market evidence.

What Aluminium Foil Importers Should Check Before Customs Clearance

Check What to Verify Why It Matters
Product description Exact technical description Determines whether PUC applies
Thickness Actual micron range Especially important for China-origin material
Exclusion All 13 listed exclusions An excluded product may fall outside this measure
Country of origin Actual manufacturing origin Duty table uses origin
Country of export Country from which goods are exported Separate table field
Producer Actual manufacturer Named producer rates exist
Exporter Exporting entity Must align with documents
Duty rate Correct table entry Rates vary materially
Invoice declaration Required for individual rate Missing declaration can trigger "all other" rate
Tariff classification Correct HS code Necessary, but not decisive by itself
Other trade remedies Separate ADD/CVD proceedings Prevents applying the wrong measure

This is a practical import-compliance checklist. Shipment-specific treatment should still be checked against the operative Customs notification and actual import documents.

Import Compliance Risks to Avoid

1. Deciding Duty Only From the HS Code

Heading 7607 is not enough. Product description controls PUC coverage.

2. Missing a Technical Exclusion

Small details such as coating, capacitor width, or micron range can change the result.

3. Mixing the Two China Product Scopes

China-origin foil from 5.5 to 80 microns does not sit in the same product scope as the China portion of this sunset review.

4. Selecting a Rate Only by Country

China and Thailand contain named producer rates and residual rates.

5. Claiming an Individual Rate Without the Invoice Declaration

The final findings expressly make individual company rates conditional on the prescribed commercial invoice.

6. Treating the DGTR Findings Date as the New Effective Date

DGTR's recommendation and the Customs notification are different regulatory stages.

7. Ignoring Other ADD/CVD Proceedings

Aluminium foil is currently subject to more than one trade-remedy track.

8. Using Old Supplier Master Data

Supplier restructuring, manufacturer changes, or different export routes can affect the rate analysis.

9. Keeping Weak Product-Specification Records

Thickness, width, coating, and composition should be supported by reliable technical documents.

Business Cost and Supply-Chain Implications

Anti-dumping duty can change the commercial comparison between suppliers even where their ex-factory prices look similar.

The real effect on a business will depend on:

  • producer,
  • country,
  • applicable duty rate,
  • transaction value,
  • ocean freight,
  • insurance,
  • ordinary customs duty,
  • taxes,
  • logistics charges, and
  • contractual responsibility for import duties.

For procurement teams, the supplier with the lowest quoted price may not necessarily provide the lowest landed cost.

The review may therefore affect:

Supplier Selection

Producer-specific rates become part of commercial sourcing.

Procurement Contracts

Contracts may need clauses dealing with duty changes and regulatory adjustments.

Inventory Planning

Businesses may want to plan purchases around regulatory certainty without assuming an unverified future effective date.

Domestic Sourcing

Where imported material becomes relatively more expensive, domestic foil may become more commercially attractive for some users.

Downstream Pricing

Packaging manufacturers may review whether any increased import cost can be absorbed or needs to be reflected in customer pricing.

Is Continued Anti-Dumping Duty a Benefit or Additional Burden?

The answer depends on where a business sits in the supply chain.

Domestic Industry Perspective

For Indian foil producers, continued duty can reduce the price pressure associated with imports that DGTR found to be dumped and, in some cases, undercutting domestic prices.

It may also support better utilisation of the additional domestic capacity developed in recent years.

Importer and Downstream Industry Perspective

Importers may face:

  • continued ADD exposure,
  • higher landed cost for certain suppliers,
  • tighter documentation controls, and
  • fewer commercially attractive sourcing options.

Downstream users may feel some indirect price pressure where imported foil forms a meaningful share of input cost.

DGTR's Position

The Authority's conclusion was that continuation of the existing measure remained in the public interest and that there was insufficient evidence from users showing a material adverse effect from the duty currently in force.

What Businesses Should Do Next

Priority Action Responsible Team Why It Matters
Immediate Identify aluminium foil imports potentially covered Import/Compliance Establish exposure
Immediate Review micron thickness and exclusions Technical/Compliance Confirm PUC applicability
Immediate Map manufacturers to duty-table entries Procurement/Import Determine supplier-specific rate
Immediate Verify origin and export country Logistics/Customs Both appear in duty table
Immediate Check invoice declaration Documentation/Customs Required for individual rates
Short-Term Recalculate landed cost Finance/Procurement Supports sourcing decisions
Short-Term Review supplier agreements Legal/Procurement Allocate duty-change risk
Short-Term Update vendor master data Procurement/ERP Improve rate mapping
Short-Term Compare alternate suppliers Procurement Manage sourcing concentration
Ongoing Track Ministry of Finance/Customs notification Compliance Confirm implementation and effective date
Ongoing Monitor other aluminium foil ADD/CVD cases Compliance Avoid overlapping-rule errors
Ongoing Maintain technical and origin records Import/Customs Supports assessment and verification

What Happens Next After the DGTR Final Findings?

The final findings complete DGTR's investigative role in this sunset review.

The Authority has recommended continuation of the existing rates for another five years.

For businesses, the next compliance question is whether and how the Central Government gives effect to that recommendation through the relevant Customs notification.

Importers should therefore monitor:

  • Ministry of Finance action;
  • Customs notification number;
  • notification date;
  • effective date;
  • duty table;
  • product exclusions; and
  • any implementation wording.

Until that step is separately verified, the DGTR recommendation should not be presented as though it has automatically become the fresh Customs levy.

Appeal and Further Procedure

The final findings state that an appeal against an order of the Central Government arising from these findings lies before the Customs, Excise and Service Tax Appellate Tribunal (CESTAT) in accordance with the Customs Tariff Act, 1975.

The DGTR document does not itself provide a complete appeal guide covering every filing requirement, fee or procedural step. Those should therefore not be invented or assumed in this update.

How Corpseed Can Help

Aluminium foil anti-dumping duty is not simply a matter of checking one HS code. An importer may need to review product thickness, exclusions, origin, export route, producer identity, the applicable duty-table row, and supplier documentation together.

Corpseed can support businesses through practical import compliance services focused on these issues.

Product Scope and Applicability Assessment

Corpseed can help businesses compare aluminium foil specifications with the PUC description and exclusion list.

This may include reviewing:

  • micron thickness,
  • coating,
  • width,
  • alloy/product construction,
  • country of origin, and
  • applicable trade-remedy proceeding.

Anti-Dumping Duty Applicability Review

A shipment can be reviewed against the relevant country, producer, and export-route combination before the business finalises its landed-cost assumptions.

Import Compliance Services

Corpseed's import compliance services can help procurement and import teams understand the regulatory treatment that may apply before goods arrive at the port.

The focus can include:

  • product applicability,
  • supplier mapping,
  • trade-remedy exposure,
  • document checks, and
  • internal compliance controls.

Duty Table and Supplier Mapping

For China and Thailand, supplier-specific rates matter.

Corpseed can assist in mapping vendors and manufacturers to the relevant duty-table entry so the procurement team does not automatically use a country-wide rate.

Commercial Invoice Documentation Review

Where a producer-specific rate is being relied upon, the invoice condition deserves a pre-shipment check.

Support may include reviewing whether the commercial invoice carries the information required under the applicable trade-remedy framework.

Customs Classification and Product Description Review

There is a relationship between HS classification and antidumping scope, though there are differences between the two.

Using customs compliance services, firms are able to look at the tariff classification and the PUC description in the law rather than just the tariff number.

Trade Remedy Compliance Review

In cases where there are ADD or CVD investigations for aluminium foil, Corpseed can assist firms in determining the scope of each investigation.

Import Documentation and Compliance Gap Assessment

A compliance review can also look at internal documents and controls, including:

  • product specification sheets,
  • certificate of origin,
  • supplier declarations,
  • commercial invoices,
  • purchase orders,
  • vendor-master information, and
  • duty-rate mapping records.

Regulatory Update Monitoring

Importers may also need to track the subsequent Ministry of Finance/Customs notification giving effect to DGTR's recommendation.

Businesses importing aluminium foil from the covered countries can use Corpseed's import compliance services and customs documentation support to review product scope, supplier-specific duty exposure and import documentation before shipment or Customs clearance.

Key Takeaways

  • DGTR has completed the 2026 sunset review covering specified aluminium foil 80 microns and below from China PR, Indonesia, Malaysia and Thailand.
  • The Authority found a likelihood of continuation of dumping and continuation or recurrence of injury if the measure is allowed to lapse.
  • DGTR has recommended continuation of the existing anti-dumping duty rates for another five years.
  • This recommendation should not be confused with the separate Ministry of Finance/Customs notification implementing the duty.
  • China-origin aluminium foil between 5.5 and 80 microns is excluded from this particular sunset-review PUC.
  • Thirteen product categories or technical variants are expressly excluded from the scope.
  • China and Thailand have producer-specific rates, making manufacturer identification important.
  • The individual rates of companies depend on the requirement for commercial invoice declaration; otherwise, the “all other” rates would be the ones applicable.
  • DGTR declined the application to raise the Thai duties and advised maintaining the individual rates as they are.
  • Importers should now go through the specifications of the products, the supplier mapping, origin documents, invoice language, and the Customs notification thereafter.

Document Preview

Embedded reference document

Fullscreen ↗

Related

Explore more updates from the same department.

Call