BIS November 2026 Notifications: 96 Indian Standards and 4 Amendments
The notifications were issued on 3 and 4 November 2026 under Rule 15(1) of the Bureau of Indian Standards Rules, 2018. The establishment dates are 28 October and 3 November 2026, depending on the notification. Earlier editions identified in the schedules will remain in force until their respective withdrawal dates in April and May 2027.
Manufacturers, importers, testing laboratories and industrial suppliers should identify the standards relevant to their activities and review whether any technical specifications, testing procedures or quality documents require revision. These notifications do not independently make BIS certification mandatory for every product mentioned.
Summary of BIS November 2026 Notifications
| Notification reference | Regulatory development | Standards covered | Establishment date | Transition / withdrawal date |
|---|---|---|---|---|
| (1631) | Amendments to existing Indian Standards | 4 amendments | 28 October 2026 | 27 April 2027 |
| (1630) | New and revised Indian Standards | 15 | 28 October 2026 | 28 April 2027, where applicable |
| (1632) | New and revised Indian Standards | 35 | 28 October 2026 | 28 April 2027, where applicable |
| (1634) | New and revised Indian Standards | 16 | 28 October 2026 | 28 April 2027, where applicable |
| (1633) | New and revised Indian Standards | 19 | 3 November 2026 | 3 May 2027, where applicable |
| (1635) | New and revised Indian Standards | 11 | 28 October 2026 | 28 April 2027, where applicable |
| Total | 96 standards established and four amendments | 100 entries | As notified | Three separate transition dates |
What Has BIS Announced Through the November 2026 Notifications?
BIS has published five notifications establishing a combined 96 Indian Standards and one notification establishing four amendments to existing standards. The changes relate to product specifications, manufacturing requirements, testing methods, technical terminology and industry-specific quality practices.
The standards cover several industries, ranging from conventional manufacturing and construction to advanced areas such as DNA sequencing, wearable electronics and mixed-reality technology.
The notifications introduce three main developments:
- Establishment of new Indian Standards: BIS has introduced technical standards for products and applications where no earlier Indian Standard is identified for withdrawal in the relevant schedules.
- Revision of existing Indian Standards: Revised editions have been established for several products, materials and testing methods. Earlier editions remain in force until the notified withdrawal dates.
- Amendments to existing standards: Four existing Indian Standards have received amendments, with a separate transition date for the versions without those amendments.
The notifications provide the standard numbers, titles, establishment dates and withdrawal dates. They do not reproduce the complete technical specifications of every standard.
Key Highlights of the BIS November 2026 Notifications
- BIS has established 96 new and revised Indian Standards through five notifications.
- Four amendments have been established for existing Indian Standards.
- The notifications were issued under Rule 15(1) of the BIS Rules, 2018.
- Most notified standards were established on 28 October 2026, while 19 were established on 3 November 2026.
- The unamended versions of four standards remain in force until 27 April 2027.
- Earlier editions identified under four establishment notifications are scheduled for withdrawal on 28 April 2027.
- Earlier editions identified under the remaining establishment notification are scheduled for withdrawal on 3 May 2027.
- The changes affect manufacturers, exporters, importers, testing laboratories, infrastructure businesses and other organisations using Indian Standards.
- The notifications do not introduce a new Quality Control Order or independently require mandatory BIS certification for all the listed products.
BIS November 2026 Notifications at a Glance
| Particular | Details |
|---|---|
| Regulatory authority | Bureau of Indian Standards |
| Department | Department of Consumer Affairs |
| Governing provision | Rule 15(1), BIS Rules, 2018 |
| Number of notifications | 6 |
| Standards established | 96 |
| Existing standards amended | 4 |
| Notification dates | 3 and 4 November 2026 |
| Gazette issue date | 6 November 2026 |
| Establishment dates | 28 October and 3 November 2026 |
| First transition deadline | 27 April 2027 |
| Withdrawal dates for listed older editions | 28 April and 3 May 2027 |
| Main regulatory development | Establishment, revision and amendment of Indian Standards |
What Is the Regulatory Basis for the BIS November 2026 Notifications?
The Bureau of Indian Standards issued these notifications under Rule 15(1) of the Bureau of Indian Standards Rules, 2018.
This provision forms part of the legal framework for notifying Indian Standards, their amendments and related withdrawal arrangements.
The notifications identify when a standard or amendment was established and specify the period during which earlier versions may continue in force.
The establishment of an Indian Standard should not be confused with mandatory BIS certification. Certification generally remains voluntary unless a separate legal requirement, such as an applicable Quality Control Order (QCO), makes compliance compulsory.
Businesses must therefore examine the relevant standard and any applicable certification directions separately.
Which Indian Standards Have Been Amended by BIS in November 2026?
Under Notification Reference HQ-PUB015/1/2020-PUB-BIS (1631), dated 3 November 2026, BIS established four amendments to existing Indian Standards.
All four amendments were established on 28 October 2026. The versions without the notified amendments remain in force until 27 April 2027.
| Indian Standard | Amendment | Industry |
|---|---|---|
| IS 6528:2024 | Amendment No. 1 | Stainless steel wire |
| IS 12102:2026 | Amendment No. 1 | Tapered roller bearings |
| IS 15844 (Part 2):2023 | Amendment No. 2 | Performance sports footwear |
| IS 17788:2021 | Amendment No. 1 | Nonwoven fabric for medical wipes |
What Do These Amendments Mean for Manufacturers?
Businesses using these standards should obtain the relevant amendment documents and compare them with their existing specifications. For example, stainless steel wire manufacturers using IS 6528:2024 should review Amendment No. 1 to determine whether their product specifications or testing procedures need updating.
Similarly, sports footwear manufacturers referring to IS 15844 (Part 2):2023 should examine Amendment No. 2 before finalising their product testing and compliance documentation. The Gazette identifies the amendments and their dates but does not describe every technical change made within them.
BIS Establishes 15 Indian Standards Covering Construction, Textiles and Industrial Applications
Under Notification Reference HQ-PUB013/1/2020-PUB-BIS (1630), BIS established 15 Indian Standards on 28 October 2026. The notification covers industrial materials, protective coatings, packaging, construction, measurement systems and environmental monitoring.
Important standards include:
| Indian Standard | Subject |
|---|---|
| IS 788:2026 | Waterproof coloured drawing ink |
| IS 2954:2026 | Vegetable-tanned leather for belting |
| IS 4056:2026 | Fish oil for the leather industry |
| IS 5905 (Part 1):2026 | Thermal spraying: design and quality requirements |
| IS 5905 (Part 2):2026 | Thermal spraying: execution of corrosion protection systems |
| IS 9755:2026 | HDPE/PP woven sacks for fertiliser packaging |
| IS 11587:2026 | Structural weather-resistant steels |
| IS 14178:2026 | Pressurised irrigation equipment terminology |
| IS 16202:2026 | Woven ground covers for horticulture |
| IS 19964:2026 | Circular economy in the construction sector |
The remaining standards address optical coordinate measuring systems, surface texture specification operators and environmental monitoring using lidar technologies.
Earlier editions identified in the notification are scheduled for withdrawal on 28 April 2027.
Why Is IS 19964:2026 Important for the Construction Sector?
- IS 19964:2026 establishes a framework covering principles and definitions relating to the circular economy in construction.
- The standard may be relevant to construction companies, project developers, material suppliers and organisations reviewing resource efficiency and circular construction practices.
- Its establishment does not independently introduce a new environmental licence, recycling authorisation or mandatory certification requirement.
- Businesses should examine the complete standard to understand its scope and potential application to their projects.
BIS Notifies 35 Indian Standards for Steel, Packaging, Medical Textiles and Industrial Products
Notification Reference HQ-PUB013/1/2020-PUB-BIS (1632) establishes 35 Indian Standards covering several manufacturing and technical sectors. All 35 standards were established on 28 October 2026. The notification includes important revisions relating to steel construction, plastic materials, industrial chemicals, food-related testing, agricultural products and technical measurement.
Major Indian Standards Established
| Indian Standard | Product or application |
|---|---|
| IS 327:2026 | Lemongrass oil |
| IS 800:2026 | General construction in steel |
| IS 869:2026 | Ethylene dichloride |
| IS 1758:2026 | Jute batching oil |
| IS 2252:2026 | Diacetone alcohol |
| IS 7019:2026 | Plastics and flexible packaging terminology |
| IS 8688:2026 | Plastic bottles for potable water |
| IS 8895:2026 | Handling, storage and transport of inedible slaughterhouse by-products |
| IS 10951:2026 | Polypropylene materials for moulding and extrusion |
| IS 12395:2026 | Disposable polyethylene trash bags |
| IS 14434:2026 | Polycarbonate moulding and extrusion materials |
| IS 15827:2026 | Greenhouse and polyhouse cladding films |
| IS 16731:2026 | Marine fuel specifications |
| IS 17653:2026 | Determination of ash content in solid biofuels |
| IS 19970:2026 | Disposable medical tampons |
The notification also establishes standards relating to construction finishes, industrial measurement, agricultural equipment, technical drawings, nuclear fuel testing and radiation protection. Earlier editions listed in this notification will remain in force until 28 April 2027.
What Does IS 800:2026 Mean for Steel Construction?
IS 800:2026 is the fourth revision of the Indian Standard covering general construction in steel. The earlier IS 800:2007 is scheduled for withdrawal on 28 April 2027.
Structural engineers, steel fabricators, construction contractors and technical consultants using the earlier edition should examine the revised standard and determine whether it affects their design procedures, specifications or project documentation. The Gazette does not identify the individual design provisions changed in the revised edition. Those must be checked against the complete standard.
What Has Changed for Plastic Bottles and Packaging Materials?
The notification establishes revised standards such as IS 8688:2026 for plastic bottles used for potable water, IS 10951:2026 for polypropylene moulding and extrusion materials and IS 12395:2026 for disposable polyethylene trash bags.
Manufacturers using these materials should examine the applicable revised standards and identify whether changes are necessary in material specifications, product testing, quality records or customer documentation. Businesses should separately verify whether their products are subject to any mandatory BIS certification or packaging-related legal requirements.
BIS Establishes 16 Indian Standards for Construction Measurement, Foundries and Rubber Testing
Through Notification Reference HQ-PUB013/1/2020-PUB-BIS (1634), BIS established 16 Indian Standards on 28 October 2026. These standards concern construction measurement, steel analysis, foundry materials and rubber testing methods. The notification includes revisions to IS 1200, which addresses methods of measurement for building and civil engineering works.
Important Standards Covered
| Indian Standard | Subject |
|---|---|
| IS 228 (Part 35):2026 | Determination of vanadium content in steel |
| IS 1200 (Part 8):2026 | Measurement of steelwork and ironwork |
| IS 1200 (Part 14):2026 | Measurement of glazing works |
| IS 1200 (Part 15):2026 | Measurement of painting, polishing and varnishing works |
| IS 1918:2026 | Physical testing of foundry sands |
| IS 3343:2026 | Natural moulding sand for foundries |
| IS 6907:2026 | Sampling methods for steel castings |
| IS 9008:2026 | Core repairing paste for foundries |
| IS 13100:2026 | Pitch powder for cast iron foundries |
| IS 16848 (Part 3):2026 | Rubber ash-content testing methods |
| IS 16848 (Part 4):2026 | Rubber volatile-matter determination |
| IS 16848 (Part 5):2026 | Determination of Mooney viscosity |
The IS 16848 entries include separate sections dealing with different testing methods. The earlier standards identified in the notification are scheduled for withdrawal on 28 April 2027.
What Should Construction Contractors and Testing Laboratories Check?
Construction companies using the affected IS 1200 provisions should review the revised methods of measurement before updating bills of quantities, measurement procedures or technical specifications. Foundries and rubber testing laboratories should examine whether their current sampling methods, laboratory procedures or reports refer to older editions.
The notification provides transition dates but does not independently change every construction contract or testing procedure. The applicable requirements must be evaluated according to the relevant standard and contractual obligations.
BIS Establishes 19 Indian Standards for Cold Rooms, Medical Devices and Wearable Electronics
Notification Reference HQ-PUB013/1/2020-PUB-BIS (1633), dated 4 November 2026, establishes 19 Indian Standards. Unlike the other establishment notifications in the merged Gazette, these standards were established on 3 November 2026. The notification covers refrigeration equipment, industrial machinery, information technology, medical products and wearable electronic devices.
Major Standards Established
| Indian Standard | Subject |
|---|---|
| IS 2370 (Part 1):2026 | Prefabricated walk-in cold rooms |
| IS 9905:2026 | Pneumatic coupling between tractors and trailers |
| IS 13082 (Part 1):2026 | Mechanical and structural requirements for ship unloaders |
| IS 13082 (Part 2):2026 | Electro-mechanical requirements for ship unloaders |
| IS 15681:2026 | Geological exploration using seismic refraction |
| IS 19915:2026 | Pressure relief valves for cylinders |
| IS 19920:2026 | Ear ventilation tubes |
| IS 19921:2026 | Ossicular reconstruction prostheses |
| IS 19931 (Part 1):2026 | Heat pumps for water heating |
| IS 19944:2026 | DNA sequencing systems |
Additional standards cover mixed and augmented reality, smart-city visualisation, electronic textiles and wearable fitness equipment. These include standards addressing the electrical resistance of conductive fabrics and measurement of heart-rate accuracy in fitness wearables.
What Is the Withdrawal Date?
The earlier Indian Standards identified in this notification are scheduled for withdrawal on 3 May 2027. For example, IS 2370 (Part 1):2026 replaces the earlier IS 2370:2014 specification for walk-in cold rooms. Manufacturers and equipment suppliers using the earlier edition should review the revised standard before the scheduled withdrawal date.
BIS Establishes 11 Standards for Footwear, Biofuels and Indoor Sports Flooring
Under Notification Reference HQ-PUB013/1/2020-PUB-BIS (1635), BIS established 11 Indian Standards on 28 October 2026. These standards concern zinc alloys, footwear testing, electrical materials, bearings, bio-based fuels and sports flooring.
Important standards include:
| Indian Standard | Subject |
|---|---|
| IS 2600 (Part 7):2026 | Aluminium determination in zinc-based die-casting alloys |
| IS 2600 (Part 8):2026 | Optical emission spectrometry for zinc alloys |
| IS 8085 (Part 1/Sec 2):2026 | Heat resistance and ageing tests for footwear sole adhesion |
| IS 12714:2026 | Bimetallic tape for electrical contacts |
| IS 16902 (Part 3):2026 | Nuclear technologies vocabulary |
| IS 19930:2026 | Linear motion rolling bearings |
| IS 19957:2026 | Bio-based isobutanol and isobutanol-blended automotive diesel fuel |
| IS 19990 (Part 1):2026 | Selection and classification of indoor sports flooring |
| IS 19990 (Part 2):2026 | Shock absorption and vertical deformation testing |
| IS 19990 (Part 3/Sec 1):2026 | PVC flooring specifications |
| IS 19990 (Part 3/Sec 2):2026 | PVC flooring installation, maintenance and inspection |
Earlier editions identified in the notification will remain in force until 28 April 2027.
Why Is IS 19957:2026 Relevant to the Biofuel Sector?
IS 19957:2026 establishes specifications for bio-based isobutanol and automotive diesel fuel blended with bio-based isobutanol for diesel engine applications. The standard may be relevant to fuel manufacturers, testing laboratories, automotive fuel suppliers and businesses involved in bio-based fuel development.
However, the establishment of this standard does not independently grant permission to manufacture, blend, store or market such fuels. Businesses must separately determine the licences, safety requirements and other applicable regulatory permissions.
What Are the Important BIS Compliance Deadlines in 2027?
The six notifications contain three different transition deadlines.
| Date | Regulatory significance |
|---|---|
| 27 April 2027 | Last date for continued validity of the four standards without the notified amendments |
| 28 April 2027 | Withdrawal date for earlier standards identified in four establishment notifications |
| 3 May 2027 | Withdrawal date for earlier standards identified in Notification (1633) |
The establishment dates of the new standards and amendments are already in the past. Businesses should therefore distinguish the date on which a standard was established from the date on which an older edition ceases to remain in force.
The withdrawal dates apply only to the earlier standards specifically identified in the relevant schedules. Where the Gazette lists no predecessor, it provides no corresponding withdrawal date.
Does the BIS November 2026 Notification Make Certification Mandatory?
No. The establishment or revision of an Indian Standard does not automatically make BIS certification compulsory for every product covered.
BIS certification is generally voluntary unless a separate legal instrument makes it mandatory. A Quality Control Order or another applicable regulatory requirement may require specified products to conform to a particular Indian Standard and obtain certification.
Manufacturers should therefore consider two separate questions:
- Does the revised or newly established Indian Standard apply to the product, material, process or testing activity?
- Is the product covered by an applicable mandatory BIS certification requirement or Quality Control Order?
A business already holding a BIS licence should also check whether BIS has issued separate guidance concerning implementation of the revised standard under the relevant certification scheme. The Gazette notifications themselves do not prescribe new certification fees, penalties or compulsory certification deadlines for all 96 standards.
Which Industries Are Affected by the BIS Standards Update?
The notifications may be relevant to a wide range of industrial and technical sectors.
| Industry | Relevant areas |
|---|---|
| Construction and infrastructure | Steel structures, protective coatings, building measurement and circular economy |
| Plastics and packaging | Plastic bottles, polypropylene materials, trash bags and flexible packaging |
| Footwear and textiles | Sports footwear, industrial textiles and medical textiles |
| Automotive and engineering | Bearings, tractor-trailer couplings and electrical contact materials |
| Medical products | Ear ventilation tubes, medical prostheses and disposable tampons |
| Chemical manufacturing | Ethylene dichloride, diacetone alcohol and industrial chemicals |
| Agriculture | Horticultural covers, fertiliser sacks, irrigation and greenhouse films |
| Energy and fuels | Marine fuels, biofuels, cylinders and heat pumps |
| Electronics and technology | Wearable devices, mixed reality and DNA sequencing systems |
| Testing laboratories | Material testing, sampling, measurement and technical verification |
The extent of impact will depend on the standards actually used by each business.
What Should Businesses Do After the BIS November 2026 Notifications?
Manufacturers, importers, suppliers and testing laboratories should review the notifications before making changes to their product compliance procedures.
- Identify the Relevant Indian Standards
Compare the notified standards with the business's products, materials, manufacturing processes and laboratory activities.
- Obtain the Complete Standards
The Gazette provides standard titles and dates, not the full technical requirements. Obtain the relevant standards and amendments through authorised BIS sources.
- Compare the Earlier and Revised Editions
For revised standards, identify differences that may affect specifications, manufacturing methods, sampling or quality testing.
- Review Product and Quality Documentation
Check technical specifications, inspection records, test reports, supplier documents and quality procedures that refer to earlier editions.
- Verify Mandatory Certification Requirements
Review applicable Quality Control Orders, BIS licence conditions and relevant product certification directions separately.
- Plan Changes Before the Withdrawal Date
Where an earlier edition is scheduled for withdrawal, evaluate the transition timetable and make any necessary technical or documentation changes.
How Can Corpseed Assist Businesses with BIS Compliance?
Businesses dealing with several product categories may need assistance identifying which Indian Standards apply and whether mandatory certification requirements affect their operations.
Corpseed provides regulatory compliance services that can help businesses understand applicable BIS certification requirements and related product approval procedures.
Depending on the product and service requirements, assistance may include:
- Identifying applicable Indian Standards.
- Reviewing whether mandatory BIS certification applies.
- Understanding relevant BIS registration or licensing procedures.
- Preparing documentation for applicable certification requirements.
- Coordinating compliance-related queries.
- Assisting with related regulatory approvals where required.
Businesses should obtain a product-specific applicability assessment before beginning a certification application, as publication of an Indian Standard alone does not establish that a licence is mandatory.
Conclusion
The Bureau of Indian Standards has established 96 new and revised Indian Standards and four amendments through six notifications issued in November 2026. These changes cover multiple industries, including steel, construction, packaging, chemicals, rubber, footwear, medical products, electronic equipment and biofuels.
The notifications establish different transition dates for the affected older standards. Businesses relying on earlier editions should review the applicable revised standards and determine whether their technical specifications, testing methods or quality procedures need updating.
Manufacturers, importers and testing laboratories should also verify whether any separate Quality Control Order or BIS certification requirement applies to their products.
