Corpseed

Textile PLI Scheme 2026 Amendment - Round 4 Eligibility, Incentives and Application Deadline

Department: Ministry of TextilesAuthority: Ministry of TextilesPublish: Applicable: 28-10-2026Govt Schemes & BenefitsGovt Schemes

Quick note

Below is the official summary and the reference document preview. Use “Open PDF” for full screen view.

Schedule a Call Back

IN +91

Summary

The Ministry of Textiles has made important changes to the Production Linked Incentive (PLI) Scheme for textiles through a notification issued on 28 October 2026. The most significant amendment for the Round 4 applicants is the decrease in the minimum turnover criteria of Part II from 200 crore rupees to 100 crore rupees.

The government has also extended the scheme period, introduced provisions for existing participants to move to Round 4 and announced a new application window from 1 November to 31 December 2026.

These changes matter to businesses manufacturing man-made fibre (MMF) apparel, MMF fabrics and technical textiles. However, investment, product eligibility and turnover conditions must still be met before a company can receive incentives.

Textile PLI Scheme 2026 Notification at a Glance

This amendment is applicable to Round 4 of the current Textile PLI Scheme. It modifies some conditions related to participation and incentives in the scheme without revamping the entire scheme.

The Ministry has once again opened the PLI application portal officially for companies that wish to participate in Round 4 of the scheme.

Notification Detail Round 4 Position
Issuing authority Ministry of Textiles, Government of India
Notification date 28 October 2026
Notification reference F. No. 12014/01/2024-MMF(Part-I)
Applicable scheme round Round 4
Eligible manufacturing focus Notified MMF apparel, MMF fabrics and technical textiles
Minimum investment Part I: 150 crore rupees; Part II: 50 crore rupees
Minimum turnover Part I: 600 crore rupees; Part II: 100 crore rupees
Online application window 1 November to 31 December 2026
Last performance year FY 2032-33
Last incentive claim year FY 2033-34

Regulatory Framework of the PLI Scheme for Textiles in India

The Production Linked Incentive Scheme for Textiles was introduced in September 2021 to encourage investment and manufacturing in selected textile segments.

The scheme covers notified products under three broad categories: MMF apparel, MMF fabrics and technical textiles. Its purpose is to support manufacturing capacity, improve competitiveness and encourage production in these sectors.

Unlike the general subsidy that could be availed just for establishing a plant, the PLI scheme is performance linked. The company participating in the scheme is supposed to make the requisite investment and generate the required turnover from the specified products.

The scheme operates through two segments, Part I and Part II, with different investment, turnover and incentive requirements.

The government has amended the framework several times. In October 2025, it reduced the minimum investment thresholds by 50%, brought down the subsequent-year incremental turnover requirement from 25% to 10% and expanded the eligible MMF product list by 17 HSN codes.

The 2026 notification makes further changes, particularly for Round 4 applicants. These must be read together with the earlier amendments.

Businesses reviewing the 2025 Textile PLI Scheme amendments should distinguish those earlier relaxations from the new Round 4 provisions.

For a Textile PLI Scheme eligibility assessment, manufacturers should first match their proposed products with the notified categories and then review the investment and turnover thresholds relevant to their application round.

What Has Changed Under the Textile PLI Scheme 2026 Amendment?

The October 2026 changes address three major issues: the turnover threshold under Part II, the time available to Round 4 participants and the position of companies already enrolled in earlier rounds.

Part II Turnover Requirement Reduced to 100 Crore rupees

Earlier, the minimum turnover criterion as per Part II was 200 crore rupees.

For Round 4 applications, the government has lowered this criterion to 100 crore rupees. The minimum investment criterion remains 50 crore rupees.

This gives manufacturers planning eligible investments under Part II a lower turnover threshold to meet. However, the scheme's other conditions continue to apply.

Scheme Period Extended for Round 4

Approved Round 4 participants now have an implementation framework extending up to FY 2033-34.

The revised schedule provides two gestation years and five performance years, followed by the corresponding incentive claim periods.

The extension is specific to Round 4. Companies participating under earlier rounds should not assume that their existing scheme periods have automatically changed.

Existing Participants Can Apply for Migration

Certain companies already participating in Rounds 1, 2 and 3 can apply under Round 4.

This option is available only where the company has not claimed or received any incentive, and its earlier application is withdrawn as applicable.

Earlier Investments Receive Specific Treatment

The notice also outlines how such eligible investments made between 24 September 2021 and 31 March 2026 would be treated for companies switching to Round 4.

The treatment depends on whether production or turnover has commenced from those investments.

What Changed in 2025 and What Changed in 2026?

The distinction matters. The reduced investment thresholds and 10% incremental turnover condition were already introduced in 2025. They should not be described as changes first made in October 2026.

Subject October 2025 amendment October 2026 Round 4 change or position
Part I minimum investment Reduced from 300 crore rupees to 150 crore rupees for new applicants 150 crore rupees
Part II minimum investment Reduced from 100 crore rupees to 50 crore rupees for new applicants 50 crore rupees
Subsequent-year incremental turnover Reduced from 25% to 10% Minimum 10% retained for Round 4
Notified MMF product coverage Expanded by 17 HSN codes Round 4 applicants must follow the applicable notified product list
Part II minimum turnover Not reduced to 100 crore rupees by the 2025 amendment Reduced from 200 crore rupees to 100 crore rupees
Migration from earlier rounds Round 4 migration not addressed Available to certain Round 1, 2 and 3 participants subject to conditions
Round 4 duration Round 4 schedule not established by this amendment Valid through FY 2033-34

Eligibility Criteria for Round 4 of the PLI Scheme for Textiles

Businesses applying under the revised scheme must meet the applicable eligibility conditions for their chosen segment.

The minimum investment and turnover requirements are different under Part I and Part II.

Eligibility Under Scheme Part I

Part I is intended for projects involving a higher level of eligible investment.

To participate under this segment, a firm or company must be willing to invest at least 150 crore rupees in eligible plant and machinery, equipment and civil works.

To qualify for the incentive, the company must also achieve a minimum turnover of 600 crore rupees from manufacturing and selling notified products.

Upon satisfying the applicable conditions in the first performance year, the incentive rate is 15% on qualifying turnover.

Both the investment and turnover requirements must be met. A company cannot claim an incentive simply because it has invested 150 crore rupees.

Eligibility Under Scheme Part II

Part II has a lower investment requirement.

A firm or company must be willing to invest at least 50 crore rupees in eligible manufacturing assets and achieve a minimum turnover of 100 crore rupees from notified products.

The first-year incentive rate under this segment is 11%.

The reduction in the turnover threshold is the key change for Round 4 applicants considering Part II. It may be particularly relevant to mid-sized manufacturers that can meet the investment condition but would have found the earlier 200 crore rupees turnover requirement difficult to achieve.

Minimum Investment and Turnover Requirements

Eligibility Condition Scheme Part I Scheme Part II
Minimum eligible investment 150 crore rupees 50 crore rupees
Minimum turnover from notified products 600 crore rupees 100 crore rupees
Incentive rate in Performance Year 1 15% 11%
Incentive rate in Performance Year 5 11% 7%
Minimum additional incremental turnover from Year 2 10% over preceding year 10% over preceding year
Sales counted for scheme turnover Through normal banking channels Through normal banking channels

For businesses comparing PLI Scheme for Textiles Round 4 eligibility, both the investment and turnover conditions are essential; neither threshold by itself establishes incentive entitlement.

The 50 crore rupees and 150 crore rupees figures are minimum investment requirements, not subsidy amounts offered by the government.

A business must also check whether the products it plans to manufacture are covered by the scheme. Operating in the textile industry alone does not establish eligibility.

PLI Incentive Rates and Turnover Conditions Under the Revised Scheme

The incentive available under the Textile PLI Scheme depends on the company's segment, eligible turnover and performance year.

The government has prescribed a five-year incentive structure. The rates are highest in the first performance year and decrease in the following years.

Incentive Rates for Part I and Part II

Under Part I, the first-year incentive rate is 15%. Under Part II, it is 11%.

From the second performance year onwards, the incentive rate decreases by one percentage point each year.

Performance Year Part I Incentive Rate Part II Incentive Rate
Year 1 15% 11%
Year 2 14% 10%
Year 3 13% 9%
Year 4 12% 8%
Year 5 11% 7%

Manufacturers comparing Textile PLI Scheme incentives should distinguish these notified rates from the actual incentive amount, which depends on meeting the applicable conditions.

These are the rates provided under the revised Round 4 framework. The actual incentive payable must be determined according to the applicable scheme conditions and eligible turnover.

Approval to participate does not, by itself, guarantee payment of an incentive.

Minimum 10% Incremental Turnover Requirement

In the second year of the performance period, the company should record an increment in turnover of not less than 10% from the previous year’s turnover.

This condition continues through Performance Year 5.

Turnover growth requirement should never be taken to mean the same as incentive percentage. For example, while the incentive percentage determines the percentage rate, the turnover growth requirement is a condition for maintaining incentive qualification.

Manufacturers should assess their expected production and sales carefully before relying on projected incentive receipts in their financial planning.

Sales Must Be Through Normal Banking Channels

The notification also states that only sales transacted through normal banking channels will be counted for the scheme.

Businesses should therefore maintain proper sales and payment records so that qualifying turnover can be supported during verification.

This is especially important where a company sells both notified and non-notified textile products. The turnover considered for the incentive must meet the applicable scheme conditions.

Eligible Investments and Excluded Costs Under the Textile PLI Scheme

An important part of Textile PLI Scheme eligibility is understanding which expenses count towards the minimum investment requirement.

The notification specifically identifies investment in plant and machinery, equipment and civil works.

Investment Components Covered Under the Scheme

Eligible investment may include qualifying expenditure on manufacturing machinery, production equipment and civil works related to the project.

The expenditure must meet the relevant scheme conditions. Businesses should consult the operational guidelines before treating a particular asset or project cost as eligible investment.

Expenses Not Included in the Investment Threshold

The October 2026 notification expressly excludes the cost of land and administrative buildings.

Project Expenditure Treatment for the Notified Minimum Investment
Plant and machinery Included, subject to the scheme conditions
Equipment Included, subject to the scheme conditions
Qualifying civil works Included, subject to the scheme conditions
Land purchase or land cost Excluded
Administrative building cost Excluded

When estimating the minimum investment under the Textile PLI Scheme, project promoters should separate eligible manufacturing expenditure from land and administrative building costs.

This distinction can make a substantial difference to project planning.

A company's total factory setup cost and its eligible investment under the PLI Scheme may not be the same. Land purchases and administrative building expenditure cannot simply be added to the qualifying investment amount.

Businesses planning new facilities should therefore examine the investment structure before applying.

Migration of Existing PLI Participants to Round 4

The revised scheme also addresses companies that are already participating under earlier rounds.

Some of these businesses may wish to move to the new Round 4 framework. The government has allowed this, but only under specific conditions.

Which Existing Applicants Can Migrate?

Existing participant companies from Rounds 1, 2 and 3 under either scheme part may apply under Round 4 if they have not claimed or received any incentive so far.

The condition relating to previous incentives is important.

A company that has already submitted an incentive claim should not assume it qualifies for migration merely because payment has not yet been received.

Withdrawal of Earlier Applications

The notification requires migrating companies to withdraw their existing applications under Rounds 1, 2 or 3, as applicable.

Before choosing migration, businesses should review the status of their earlier applications, incentive claims, eligible investments and manufacturing operations.

Going to Round 4 is not necessarily a continuation of an earlier approval.

Treatment of Investments Made Before 31 March 2026

The government has laid down specific rules regarding investments made before the new round for companies eligible for migration to Round 4.

The relevant investment period begins on 24 September 2021, the date of the original scheme notification, and ends on 31 March 2026.

Investments Where Production Has Not Started

If the applicant has not commenced production or turnover from the relevant investment, qualifying expenditure made during this period will be considered at its actual cost for calculating eligible investment.

This treatment is available subject to the conditions specified for migration.

Investments Where Production Has Already Started

Where production or turnover has already commenced from the investment, the notification provides for depreciation on the capitalised assets for the period from 1 April 2026 to 31 March 2027.

Depreciation is the accounting recognition of an asset's cost over its useful life. In this case, the applicable depreciation rate must be determined according to the Companies Act, 2013.

The treatment can affect the eligible value of investments already made by a migrating company.

These special provisions concern companies moving from earlier rounds. They do not apply to new applicants entering directly under Round 4.

Round 4 Implementation Timeline and Incentive Claim Schedule

The amended scheme provides a longer implementation period for approved Round 4 participants.

The timeline consists of a gestation period, followed by five performance years and their corresponding incentive claim years.

Gestation Period

The two gestation years are:

  • FY 2026-27
  • FY 2027-28

These years form the initial period before the first performance year under the notified Round 4 schedule.

Performance Years

The first performance year begins in FY 2028-29.

The five-year performance period continues until FY 2032-33. During the relevant performance years, participating companies must satisfy the applicable conditions for receiving incentives.

Incentive Claim Schedule

Stage Financial Year Related Incentive Claim Year
Gestation Year 1 FY 2026-27 Not specified
Gestation Year 2 FY 2027-28 Not specified
Performance Year 1 FY 2028-29 FY 2029-30
Performance Year 2 FY 2029-30 FY 2030-31
Performance Year 3 FY 2030-31 FY 2031-32
Performance Year 4 FY 2031-32 FY 2032-33
Performance Year 5 FY 2032-33 FY 2033-34

This Textile PLI Scheme Round 4 incentive claim timeline is different from the deadline for submitting a new Round 4 application.

Under this framework, FY 2032-33 is the final performance year, while FY 2033-34 is the final incentive claim year.

Businesses should not confuse this extended incentive schedule with the current Round 4 application window, which closes on 31 December 2026.

Operational Guidelines and Further Implementation Requirements

Ministry of Textiles has said that operational guidelines that will include the changes made in October 2026 will be published separately.

The notification already confirms the financial thresholds, incentive rates, migration conditions, treatment of historical investments and the Round 4 implementation schedule.

However, applicants must also follow the applicable operational guidelines and instructions published through the official PLI portal.

What Applicants Need to Check

Businesses must check the relevant instructions for:

  • Product categories that are eligible and notified HSN codes.
  • Criteria for application and record keeping.
  • Investment and turnover criteria verification.
  • Procedures for eligible existing participants seeking migration.
  • Incentive claim requirements and supporting financial information.

These are matters applicants should verify against the applicable guidelines. They should not be treated as a new document checklist created by the October notification.

The notification itself does not prescribe a new application fee, fixed approval period or universal list of documents for Round 4.

Impact of the Textile PLI Scheme 2026 Amendment on Businesses

The revised framework may affect how manufacturers assess future projects, production plans and scheme participation.

The impact will depend on the company's products, investment capacity and existing participation status.

New Textile Manufacturing Projects

For businesses planning eligible manufacturing projects, the revised Round 4 timeline provides a defined period for investment and future performance.

Applicants still need to assess whether their planned investment, product category and turnover expectations meet the conditions under Part I or Part II.

Mid-Sized Manufacturers

The reduction in the Part II turnover threshold to 100 crore rupees may make participation more achievable for qualifying mid-sized textile businesses.

However, MSME status does not remove the minimum investment or turnover requirements. A manufacturer must still satisfy the applicable financial and product conditions.

MMF Apparel, Fabric and Technical Textile Manufacturers

The scheme focuses on notified manufacturing lines rather than the entire textile sector.

Manufacturers should check the relevant product classifications before making investment decisions.

Businesses exploring opportunities in the textiles and apparel industry should assess the actual product coverage and applicable scheme requirements.

Existing PLI Participants

Companies from earlier rounds may have an opportunity to seek migration where they satisfy the notified conditions.

For these businesses, the treatment of earlier investments and the status of previous incentive claims are particularly important.

The decision should be based on the company's circumstances and the applicable scheme provisions, rather than an assumption that Round 4 will necessarily be more beneficial.

What Should Textile Manufacturers Do After the PLI Scheme Amendment?

Businesses interested in Round 4 should check their eligibility and project readiness before submitting an application.

  1. Confirm the Product Category: Check whether the proposed MMF apparel, MMF fabric or technical textile products are included in the notified scheme list. Use the applicable HSN classifications and product descriptions.
  2. Assessment of Investment Requirement: Ensure the project satisfies the minimum required investment requirement as per Part I or Part II. Ignore expenses that are not allowable for the purposes of the scheme.
  3. Turnover Projections: Evaluate the ability of the enterprise to satisfy the prescribed turnover and annual growth requirements.
  4. Examine Existing Applications: Companies participating in earlier rounds should review their incentive claim status, investment records and migration eligibility before taking any action.
  5. Prepare Relevant Records: Organise the financial, investment and manufacturing information required under the applicable operational guidelines.
  6. Apply Within the Announced Window: Eligible companies can submit Round 4 applications through the official government portal between 1 November and 31 December 2026, following the applicable portal instructions.

The application window is an important date for businesses planning to participate. Companies should check the latest government notices and portal instructions before filing.

For businesses searching how to apply for Textile PLI Scheme Round 4, the official starting point is the official portal. The Textile PLI Scheme 2026 application deadline announced for Round 4 is 31 December 2026.

How Can Corpseed Help With Textile PLI Scheme Consultancy?

Understanding the financial conditions of the Textile PLI Scheme is only one part of planning a manufacturing project. Businesses may also need to consider factory setup, regulatory approvals, project documentation and operational requirements.

Corpseed provides regulatory and factory setup consultancy services for businesses in India. Manufacturers exploring the revised scheme can seek assistance with related project and compliance requirements.

Businesses looking for textile manufacturing project consultancy, PLI Scheme eligibility assessment or government incentive advisory services should confirm the precise scope of support available for their project, particularly where a request involves PLI-specific filings.

1. Factory Setup and Project Planning

Corpseed's factory setup services can assist businesses with understanding the regulatory requirements associated with establishing a manufacturing facility.

2. Regulatory Approval Assistance

Textile manufacturing projects may require different licences and approvals depending on their location, processes and activities.

Corpseed can assist with applicable regulatory and factory-related compliance requirements within its service scope.

3. Documentation and Compliance Review

Businesses may consider getting professional help in analyzing their project documentation and finding out any compliance obligations prior to making an investment in a new facility.

4. Application Assistance for PLI Scheme

For companies interested in application assistance for Textile PLI Scheme, it is recommended to check the availability of such service from Corpseed first.

Requests for Textile PLI Scheme application assistance, PLI Scheme documentation support and PLI incentive claim support should be discussed against the latest official rules; professional assistance cannot guarantee government approval or payment.

Planning to set up or expand a textile manufacturing unit? Contact Corpseed to discuss your project requirements, applicable approvals and available consultancy support.

Key Takeaways

The Ministry of Textiles has amended the Production Linked Incentive Scheme for Textiles for Round 4 applicants through its notification dated 28 October 2026.

The minimum investment requirement for both Part I and Part II is still 150 crore rupees and 50 crore rupees respectively. The minimum turnover requirement in Part II has been lowered from 200 crore rupees to 100 crore rupees, whereas Part I requires 600 crore rupees.

Incentives for the first year will be at 15% in Part I and 11% in Part II depending on qualifying conditions. Incremental turnover for subsequent years is 10% over the previous year.

Eligible existing participants from Rounds 1, 2 and 3 may apply for migration, subject to the notified conditions.

The Round 4 implementation framework extends to FY 2033-34, while the current application window remains open until 31 December 2026.

Businesses should check product eligibility, eligible investment, financial thresholds and operational guidelines before applying.

Document Preview

Embedded reference document

Fullscreen ↗

Related

Explore more updates from the same department.

Call