Corpseed

Fertiliser Control Eleventh Amendment Order 2026: New Biochar Standards, Testing and Compliance Requirements

Department: Department of Agriculture and Farmers WelfareAuthority: Ministry of Agriculture and Farmers WelfarePublish: Applicable: 17-11-2026Regulatory ComplianceAgriculture & Allied Sector

Quick note

Below is the official summary and the reference document preview. Use “Open PDF” for full screen view.

Schedule a Call Back

IN +91

Summary

Manufacturers producing biochar for agricultural use now have specific quality standards to consider. The Ministry of Agriculture and Farmers Welfare has amended the Fertiliser Control Order, 1985, to include organic carbon enhancers manufactured through pyrolysis and prescribe technical specifications for biochar.

The changes were introduced through the Fertiliser (Inorganic, Organic or Mixed) (Control) Eleventh Amendment Order, 2026, issued under Notification S.O. 6170(E), dated 11 November 2026. The Gazette issue is dated 12 November 2026, while the electronic publication record carries 17 November 2026.

The amendment sets limits for moisture, organic carbon, pH, electrical conductivity and heavy metals. It also specifies how biochar samples are to be collected and tested under the regulatory framework.

For businesses manufacturing or supplying biochar as a regulated agricultural input, the important question is whether their products meet these standards and whether any existing Fertiliser Control Order requirements apply to their activities.

Fertiliser Control Eleventh Amendment Order 2026 - Notification at a Glance

Particular Details
Notification title Fertiliser (Inorganic, Organic or Mixed) (Control) Eleventh Amendment Order, 2026
Notification number S.O. 6170(E)
Issuing authority Ministry of Agriculture and Farmers Welfare
Department Department of Agriculture and Farmers Welfare
Order date 11 November 2026
Gazette issue date 12 November 2026
Electronic publication date 17 November 2026, as recorded in the available Gazette index
Legal basis Section 3 of the Essential Commodities Act, 1955
Principal legislation amended Fertiliser (Control) Order, 1985
Main development Inclusion of pyrolysis-based organic carbon enhancers and new biochar specifications
Provisions amended Clauses 2, 27B, 29 and 29D
Schedule amended Schedule VIII
New technical provisions Parts D, E and F
Principal affected sector Manufacturers and businesses dealing with covered organic carbon enhancers
Commencement Date of publication in the Official Gazette
Separate compliance deadline Not specified in the amendment
Separate biochar certification scheme Not introduced by this notification

Important: The Order takes effect from Gazette publication. The Gazette issue is dated 12 November, but the available electronic record indicates publication on 17 November 2026. Where the exact commencement date affects a legal decision, the official e-Gazette publication record should be checked.

What Is the Fertiliser Control Order, 1985?

The Fertiliser Control Order (FCO), 1985, is the principal regulatory framework governing specified fertilisers in India. It operates under the Essential Commodities Act, 1955.

The Order covers several aspects of fertiliser regulation, including manufacturing and dealing requirements, prescribed product standards, inspection, sampling and laboratory analysis.

Its purpose is not limited to checking whether a business holds an approval. It also provides a basis for examining the quality of regulated products being manufactured and supplied.

Over time, the government has amended the FCO to include additional products and update existing requirements.

Organic carbon enhancers derived from compressed biogas facilities were already addressed through earlier amendments. The November 2026 amendment extends the relevant provisions to organic carbon enhancers manufactured through pyrolysis.

It also adds separate specifications for biochar under Schedule VIII.

This distinction matters because different fertiliser-related products can have different standards and testing methods. Businesses cannot assume that compliance with the specifications for one category automatically establishes compliance for another.

What Is a Pyrolysis-Based Organic Carbon Enhancer?

Pyrolysis is a process in which organic material is heated with little or no oxygen. The process breaks down the material and can produce a carbon-rich solid called biochar.

Biochar may be made using suitable organic feedstocks. However, the properties of the final product depend on the material used and the conditions under which it is processed.

When biochar is intended for an agricultural purpose, its composition becomes important. A carbon-rich appearance does not establish that the material meets the standards prescribed for a regulated product.

How Does the Amendment Define a Pyrolysis-Based Organic Carbon Enhancer?

The Eleventh Amendment Order inserts Explanation 2 under Clause 2 of the FCO.

For the provisions identified in that explanation, an organic carbon enhancer manufactured by pyrolysis means organic material produced through the pyrolysis method.

The explanation applies to specified provisions, including Clause 2, Clause 27B, Clause 29(1E), Clause 29D and Parts D, E and F of Schedule VIII.

The definition identifies the material covered by these provisions. It should not be treated as proof that every output from every pyrolysis facility is subject to identical fertiliser requirements.

Is Biochar the Same as an Organic Fertiliser?

Biochar and conventional organic fertilisers are not necessarily the same product.

Organic fertilisers are generally associated with materials used to supply nutrients or improve soil conditions under their applicable regulatory categories.

Biochar is a carbon-rich material made through thermal processing. Its properties depend on the feedstock and production conditions.

The November amendment specifically lists biochar under Part D of Schedule VIII and provides standards for that product.

Therefore, a business selling biochar for a regulated fertiliser-related use should examine the specifications applicable to biochar rather than assuming that general organic manure standards are sufficient.

What Has Changed Under the Fertiliser Control Eleventh Amendment Order, 2026?

The government has made changes to four existing clauses and inserted three new parts into Schedule VIII.

The revisions mainly concern product coverage, inspector qualifications, laboratory analysis and technical specifications.

Amendment to Clause 2: Inclusion of Pyrolysis-Based Products

Clause 2 contains important definitions and provisions dealing with prescribed standards.

The amendment makes two significant changes.

First, it adds organic carbon enhancers manufactured by pyrolysis to the relevant wording of Clause 2(h).

Second, it introduces a new explanation defining this category for the specified provisions.

The amendment also inserts item (xi) under Clause 2(q), connecting the prescribed standards for pyrolysis-based organic carbon enhancers with Part D of Schedule VIII.

In practical terms, biochar now has an identified place within the relevant FCO provisions and a set of specifications against which its quality can be assessed.

Amendment to Clause 27B: Qualifications of Fertiliser Inspectors

Clause 27B deals with qualifications for inspectors appointed to oversee specified fertiliser categories.

The amendment expands its references to include organic carbon enhancers manufactured through pyrolysis alongside the relevant biogas-derived products.

This change brings the additional product category within the inspector-qualification framework.

It does not create a new licence for manufacturers under Clause 27B. Manufacturing and dealing approvals, where applicable, are governed by other provisions of the FCO.

Amendment to Clause 29: Laboratory Analysis of Biochar Samples

A new sub-clause, 29(1E), has been inserted.

It provides that samples of organic carbon enhancers manufactured through pyrolysis, when drawn by an inspector, are to be analysed using the procedure prescribed under Part F of Schedule VIII.

The provision also identifies the Regional Centres of Natural and Organic Farming and permits analysis through other laboratories notified by the Central or State Government.

This gives inspectors and laboratories a specific reference for analysing the covered products.

Amendment to Clause 29D: Referee Analysis

Clause 29D concerns the referee-analysis framework for the relevant fertiliser categories.

Referee analysis is connected with the statutory process for reviewing a laboratory result when it is challenged.

The November amendment expands the wording of Clause 29D to include pyrolysis-manufactured organic carbon enhancers.

It does not mean that a manufacturer can automatically replace an official analysis with a report obtained from any private laboratory. The applicable statutory procedure must still be followed.

Changes to Schedule VIII

Schedule VIII now contains additional provisions specifically addressing products manufactured through pyrolysis.

Provision What it covers Why it matters
Part D Biochar quality specifications Identifies the prescribed product limits
Part E Sampling procedure Refers to the method used for drawing samples
Part F Laboratory analysis Prescribes how specified parameters are analysed

Together, these changes provide a clearer technical framework for the quality assessment of biochar under the amended Order.

Who Is Affected by the New Biochar Standards in India?

The amendment is particularly relevant to manufacturers and suppliers handling biochar or other covered pyrolysis-based organic carbon enhancers for regulated uses.

However, the same requirements should not automatically be applied to every business operating a pyrolysis plant.

Biochar Manufacturers

Businesses producing biochar for regulated agricultural purposes should review the new product specifications.

Manufacturers need to understand whether the finished material meets the relevant standards for organic carbon, moisture, pH, electrical conductivity, H:Corg and heavy metals.

Where a manufacturer already has testing arrangements, it is worth checking whether those arrangements cover the methods and parameters prescribed under Schedule VIII.

Pyrolysis Plant Operators

Pyrolysis facilities may produce materials intended for different commercial purposes.

Operators planning to market their output as a regulated organic carbon enhancer should examine whether the product falls within the relevant FCO category.

The operation of a pyrolysis plant may also be subject to separate environmental or industrial requirements. Those obligations must be assessed independently of the November amendment.

Fertiliser Suppliers and Dealers

Businesses purchasing and supplying covered biochar products should understand the regulatory category of the material.

Product specifications and relevant quality reports may be important when assessing whether a product is suitable for regulated supply.

Dealers must also consider any existing FCO requirements applicable to their activities.

Testing Laboratories

Laboratories conducting analysis under the amended provisions must follow the applicable statutory procedures and operate within the scope of their authorisation or notification.

The new methods are particularly relevant to the analysis of samples drawn by fertiliser inspectors.

New Biochar Quality Standards Under Schedule VIII, Part D

One of the most important parts of the amendment is the introduction of measurable standards for biochar.

A product cannot be assessed solely on its appearance or the fact that it was produced through pyrolysis. Its relevant properties must be determined through appropriate analysis.

Part D of Schedule VIII prescribes the following specifications.

Biochar Quality Specifications Under FCO 2026

Parameter Prescribed limit
Moisture content Maximum 20% by weight
Organic carbon content Minimum 30% by weight
Hydrogen-to-organic-carbon ratio (H:Corg) Maximum 0.7
pH 6.5 to 9.5
Electrical conductivity Less than 4

The amendment does not expressly state the electrical conductivity unit alongside the value in Part D. Laboratories should verify the correct reporting interpretation before using the figure to establish compliance.

Moisture Content

The maximum permitted moisture content is 20% by weight.

Moisture is the amount of water present in the material. Its level can affect handling, storage and the dry-matter proportion of the finished product.

A manufacturer should not rely only on how dry a batch looks or feels. The prescribed testing method is used to determine its actual moisture content.

Organic Carbon Content

Biochar must contain at least 30% organic carbon by weight.

This requirement is particularly important because carbon content is a defining characteristic of the regulated product.

Different feedstocks and processing conditions can result in different carbon concentrations. Manufacturers therefore need to assess the final product rather than assuming that all pyrolysis-derived materials contain sufficient organic carbon.

Hydrogen-to-Organic-Carbon Ratio

The prescribed H:Corg ratio must not exceed 0.7.

This ratio is used to describe certain characteristics of carbonised organic material.

The amendment provides an analytical approach for measuring hydrogen and carbon. The resulting values help determine whether the product meets the specified limit.

pH Requirements

The permitted pH range is 6.5-9.5.

pH indicates how acidic or alkaline a material is. Since the amendment specifies a range, a result below 6.5 or above 9.5 would fall outside this particular requirement.

The prescribed laboratory method must be used when assessing the parameter.

Electrical Conductivity

The maximum electrical conductivity value is stated as less than 4.

Electrical conductivity is commonly associated with dissolved ions in a material's aqueous extract. It is one of the parameters used when assessing the characteristics of biochar.

The notification does not expressly identify the measurement unit in the specification table. It would therefore be inappropriate to add a unit without confirming it from an authoritative technical source.

For businesses: Meeting the organic carbon requirement alone is not enough. All applicable specifications must be considered when determining whether the covered biochar product meets the prescribed standard.

Maximum Heavy Metal Limits for Biochar Under the 2026 Amendment

The amendment also prescribes limits for eight heavy metals.

This is an important part of the new biochar standards because the finished material may contain metals originating from the feedstock or associated processing conditions.

The limits apply to the biochar product and are expressed in milligrams per kilogram.

Permissible Heavy Metal Concentrations

Heavy metal Maximum limit (mg/kg)
Arsenic (as As2O3) 10
Cadmium (Cd) 5
Chromium (Cr) 50
Copper (Cu) 300
Zinc (Zn) 1,000
Lead (Pb) 100
Mercury (Hg) 0.15
Nickel (Ni) 50

These are maximum product-quality limits. They should not be confused with permissible concentrations in agricultural soil, groundwater or industrial wastewater.

Why Do Heavy Metal Limits Matter?

Some metals can remain in the solid material after pyrolysis. Their concentrations may vary depending on the feedstock and processing conditions.

For a manufacturer, this makes the quality of the starting material an important consideration. However, raw-material selection alone cannot establish that the finished biochar meets the prescribed specifications.

Laboratory analysis of the final product provides a basis for assessing the relevant concentrations.

Businesses should also avoid assuming that material produced from agricultural residues or another organic source is automatically free from excessive heavy metal concentrations.

The notification does not provide separate higher limits for particular feedstocks.

How Will Biochar Samples Be Collected Under the New Rules?

The government has inserted Part E into Schedule VIII to address the sampling of organic carbon enhancers manufactured through pyrolysis.

Part E refers to the sampling methodology already contained in Schedule II, Part A of the FCO.

This means the procedure must be read with the existing sampling provisions rather than treated as a completely independent system.

For statutory inspection, the manner in which samples are drawn is important because an analysis result forms part of a regulatory process.

The November amendment does not introduce a new fixed routine testing frequency for every biochar manufacturer.

Businesses should therefore avoid confusing the prescribed method for official sampling with a supposed requirement to submit every production batch for government testing.

Biochar Laboratory Testing Methods Under Schedule VIII, Part F

Part F sets out methods for analysing several of the parameters prescribed for pyrolysis-based organic carbon enhancers.

It covers moisture, organic carbon, H:Corg, pH and heavy metals.

These procedures matter because laboratory results must be assessed using the methods applicable to the relevant product.

1. Moisture Content Testing

The method begins with approximately 5 grams of the prepared sample.

The material is placed in a clean, dry and previously weighed Petri dish. It is then heated in an oven at 65°C ±1°C for approximately five hours, until a constant weight is achieved.

After heating, the sample is cooled in a desiccator and weighed again.

The loss in weight is used to calculate the moisture percentage.

The notification gives the formula:

Moisture (%) = 100 × (B − C) / (B − A)

Where:

A is the weight of the empty Petri dish.

B is the weight of the dish and material before drying.

C is the weight of the dish and material after drying.

The result is compared with the prescribed maximum moisture content of 20%.

2. Organic Carbon Testing

Part F also provides a procedure for estimating organic carbon.

The process involves drying a sample at 105°C for six hours and placing approximately 10 grams of the dried material in a pre-weighed crucible.

The sample is heated in a muffle furnace at 650-700°C for six to eight hours.

After cooling, the material is kept in a desiccator for 12 hours before weighing.

The notification provides a calculation for total organic matter based on the change in weight.

It then calculates organic carbon as follows:

Total organic carbon (%) = Total organic matter (%) / 1.724

This result is assessed against the prescribed minimum organic carbon content of 30%.

3. H:Corg Ratio Testing

The notification specifies the use of a CNH analyser to measure carbon and hydrogen through dry combustion.

Inorganic carbon is determined with reference to ASTM D4373.

Organic carbon is calculated by subtracting inorganic carbon from total carbon.

The relevant hydrogen and organic carbon values are then used to assess the H:Corg ratio.

4. pH Testing

For pH analysis, Part F specifies a procedure involving 25 grams of biochar mixed with 500 ml of distilled water.

The suspension is shaken using a rotary shaker for two hours.

After filtration through Whatman No. 1 or equivalent filter paper using a Buchner funnel under vacuum, the pH of the filtrate is measured with a pH meter.

The result is assessed against the range of 6.5-9.5.

5. Heavy Metal Analysis

The amendment does not reproduce a separate detailed procedure for every heavy metal. Instead, Part F refers to methods contained in Schedule IV, Part D.

Parameters Applicable reference
Cadmium, copper, chromium, lead, nickel and zinc Schedule IV, Part D, Serial No. 10
Mercury Schedule IV, Part D, Serial No. 11
Arsenic Schedule IV, Part D, Serial No. 12

These references must be followed when applying the relevant statutory analytical requirements.

Which Laboratories Are Authorised to Analyse Biochar Samples?

Clause 29(1E) identifies the laboratories that may analyse inspector-drawn samples of pyrolysis-manufactured organic carbon enhancers.

The notification names Regional Centres of Natural and Organic Farming at the following locations:

  • Bengaluru
  • Bhubaneswar
  • Ghaziabad
  • Imphal
  • Nagpur

Analysis may also be conducted by laboratories notified by the Central Government or State Government.

The important distinction is between a laboratory that offers commercial testing and one authorised to analyse statutory samples under the relevant FCO provision.

A private test report may help a manufacturer understand product quality, but it should not automatically be treated as an official statutory analysis report.

Businesses arranging biochar testing should confirm the purpose of the test, the method to be followed and the laboratory's relevant capabilities or authorisation.

What Happens If a Regulatory Test Result Is Disputed?

The FCO contains a framework for challenging certain analysis results and obtaining further analysis, subject to the applicable conditions.

The November 2026 amendment expands Clause 29D to include pyrolysis-manufactured organic carbon enhancers within the relevant referee-analysis provisions.

Where a statutory result is disputed, the business must follow the prescribed procedure rather than simply obtaining another report and treating it as a replacement.

The relevant deadlines, authorities and conditions should be checked against the FCO provisions in force at the time.

Difference Between Pyrolysis-Based and Biogas-Based Organic Carbon Enhancers

The FCO now addresses organic carbon enhancers obtained through more than one production process.

Earlier amendments covered products derived from compressed biogas plants or biogas units. The November 2026 amendment adds pyrolysis-based organic carbon enhancers and prescribes standards for biochar.

The two categories should not be treated as interchangeable.

Basis Pyrolysis-based organic carbon enhancer Biogas-based organic carbon enhancer
Production method Heating organic material under limited or absent oxygen Biological processing of organic material
Typical process Pyrolysis Anaerobic digestion
Relevant regulatory development Eleventh Amendment Order, 2026 Earlier FCO amendments
Product specifications Part D of Schedule VIII for biochar Applicable existing Schedule VIII specifications
Quality assessment Based on prescribed biochar parameters and testing methods Based on the standards and methods applicable to the relevant biogas-derived product

The difference is important for manufacturers selecting the correct testing procedures.

A test method used for a biogas-derived product should not automatically be applied to biochar without checking the relevant regulatory provision.

Does the FCO Amendment 2026 Make Biochar Registration Mandatory?

The November 2026 notification does not expressly establish a separate biochar registration or certification scheme.

It introduces provisions and quality standards for covered pyrolysis-based organic carbon enhancers.

The notification does not specify:

  • A new standalone biochar registration certificate.
  • A separate biochar certification application form.
  • A new government registration fee.
  • A fixed approval processing period.
  • A separate renewal period.
  • A new transition deadline for obtaining a biochar-specific certificate.

However, this does not mean that businesses dealing with regulated biochar products are automatically exempt from existing licensing or approval requirements.

The Fertiliser Control Order already contains provisions governing relevant manufacturing and dealing activities.

Whether a particular business needs an existing certificate or authorisation depends on the product, activity and applicable FCO provisions.

What About Environmental Approvals for Pyrolysis Plants?

Fertiliser product compliance and environmental permissions are separate matters.

A pyrolysis facility may need to examine the applicability of State Pollution Control Board consent requirements and other industrial permissions depending on its location, process, scale and activities.

Such requirements arise under their respective laws. They are not automatically introduced by the November 2026 Fertiliser Control amendment.

Businesses planning a new biochar manufacturing facility should therefore examine both product-related compliance and applicable facility-level permissions.

How Will the New Biochar Standards Affect Manufacturers and Suppliers?

The most immediate practical issue is product quality.

A manufacturer planning to supply biochar as a regulated agricultural input should understand whether the finished product meets the newly prescribed specifications.

That assessment cannot be based only on the raw material, production technology or a general laboratory report.

The amendment creates several areas that businesses may need to review.

Product specifications: Manufacturers should compare the relevant properties of their finished biochar against Schedule VIII, Part D.

Feedstock and process control: Changes in raw materials or production conditions may affect the properties of the finished material. This is an operational quality consideration rather than a separate feedstock-approval process created by the amendment.

Testing arrangements: Businesses should verify that relevant parameters are assessed using appropriate methods.

Product classification: Suppliers should understand whether the material falls within the regulated product category before marketing it for a particular use.

Regulatory documentation: Existing approvals, product information and applicable quality records should be reviewed where relevant.

These steps can help businesses understand their position under the amended framework.

What Are the Consequences of Supplying Non-Standard Biochar?

Where a product is regulated under the FCO, compliance with the applicable prescribed standards is important.

The principal Order provides authorities with inspection and sampling powers and contains provisions concerning non-standard fertilisers and regulatory contraventions.

If an inspector-drawn sample fails an applicable prescribed parameter, the result may lead to further action under the governing legal provisions.

The nature of that action depends on the circumstances and the requirements of the FCO and the Essential Commodities Act, 1955.

Possible areas of concern include:

  • Manufacturing or selling a covered product that does not meet applicable specifications.
  • Incorrect product classification.
  • Failure to meet existing authorisation requirements, where applicable.
  • Non-compliance with lawful inspection or sampling requirements.
  • Inaccurate or unsuitable quality documentation.

The November 2026 amendment does not itself prescribe a new fixed monetary penalty specifically for biochar.

Businesses should not assume that every failed test automatically produces the same enforcement outcome. The statutory procedure, nature of the non-compliance and applicable legal provisions must be considered.

What Should Biochar Manufacturers Do After the 2026 Amendment?

Manufacturers and suppliers should begin by checking whether the amendment applies to their products.

Once the regulatory classification is clear, the relevant technical and operational requirements can be assessed.

Practical Compliance Checklist

Area Action for businesses
Product classification Confirm whether the product falls within the relevant FCO provisions
Existing approvals Check applicable manufacturing or dealing requirements
Moisture content Assess against the prescribed 20% maximum
Organic carbon Assess against the prescribed 30% minimum
H:Corg and pH Compare laboratory results with the applicable limits
Electrical conductivity Verify the prescribed value and correct reporting interpretation
Heavy metals Check all eight prescribed maximum concentrations
Sampling Review the applicable Schedule II, Part A methodology
Laboratory testing Identify suitable methods and relevant authorised laboratories
Quality records Maintain appropriate testing and compliance documentation
Regulatory monitoring Check for subsequent government clarifications or amendments

Not every item represents a separate filing obligation newly created in November 2026.

For example, maintaining additional internal quality records may be a sensible business practice, but it should not be described as a new statutory record-submission duty unless the applicable provision requires it.

Businesses should separate their internal quality-control procedures from official testing and reporting requirements.

How Corpseed Can Help with Fertiliser and Biochar Regulatory Compliance?

Manufacturing biochar for regulated agricultural use involves more than selecting equipment and producing a carbon-rich material. Businesses must also understand how the product is classified, which standards apply and what approvals may be needed for their activities.

Corpseed provides support for fertiliser manufacturing plant setup and related regulatory requirements.

Depending on the project and applicable requirements, assistance may include:

  • Fertiliser regulatory assessment: Identifying the relevant FCO provisions and compliance considerations for the business activity.
  • Fertilizer manufacturing plant setup: Support with planning and regulatory requirements connected with establishing a fertiliser manufacturing facility.
  • Environmental compliance services: Assistance with applicable State Pollution Control Board consent requirements and related permissions.
  • Documentation support: Helping businesses identify and prepare documents for relevant regulatory applications.
  • Compliance coordination: Supporting businesses in understanding the requirements connected with their manufacturing or supply operations.

The exact scope of assistance should be confirmed for the specific project. Corpseed does not issue statutory approvals or replace government-authorised laboratories.

Planning to manufacture or supply biochar for agricultural use? Contact Corpseed for assistance in reviewing applicable fertiliser compliance requirements, manufacturing approvals and environmental permissions.

Key Takeaways

The Fertiliser Control Eleventh Amendment Order, 2026, adds pyrolysis-manufactured organic carbon enhancers to specified provisions of the FCO and introduces quality standards for biochar.

The main changes concern product specifications, inspector qualifications, sampling and laboratory analysis.

Biochar covered by the new specifications must meet the prescribed limits for moisture, organic carbon, H:Corg, pH, electrical conductivity and heavy metals.

The amendment does not expressly introduce a standalone new biochar registration, certification fee or application deadline. Existing regulatory requirements must still be assessed according to the business activity.

For manufacturers and suppliers, the appropriate next step is to check product classification, review applicable specifications and determine whether existing approvals or other compliance obligations apply.

Document Preview

Embedded reference document

Fullscreen ↗

Related

Explore more updates from the same department.

Call