Cookware, Utensils and Cans QCO 2026: Revised BIS Certification Deadlines

Manufacturers of utensils and beverage cans made of aluminium must revalidate the compliance date of their BIS certificate. The government has notified the Cookware, Utensils and Cans for Foods and Beverages (Quality Control) Second Order, 2026, which amends the earlier implementation schedule notified during the year.

The Ministry of Commerce and Industry, through its Department for Promotion of Industry and Internal Trade (DPIIT), has made the order through Notification S.O. 5624(E), dated 13th October 2026, superseding the previous Quality Control Order made in January 2026, save as per the saving provision.

The revised requirements affect two product categories: wrought aluminium utensils covered by IS 1660:2024 and aluminium cans for beverages covered by IS 14407:2023.

For wrought aluminium utensils, BIS compliance applies with immediate effect under the Second Order, including for micro and small enterprises. Beverage can manufacturers have been given more time, with different deadlines in 2027 based on enterprise classification.

The notification also covers the compulsory use of the BIS Standard Mark, treatment of existing stock, import-related exemptions and research and development (R&D) imports.

Businesses that manufacture or import these products should first identify the applicable Indian Standard and then check whether they require a BIS licence under the revised schedule.

Notification at a Glance

The Second Quality Control Order sets out the revised implementation dates while continuing the mandatory BIS conformity assessment framework for the notified products.

The notification does not impose one common deadline for every product in its title. The applicable date depends on the relevant Indian Standard and, for aluminium beverage cans, whether the manufacturer falls within the general, small or micro enterprise category.

What Is the Regulatory Framework Behind the Second QCO, 2026?

The Government has issued the Second Order under the Bureau of Indian Standards Act, 2016. This Act provides the legal basis for prescribing Indian Standards, granting certification licences and making conformity requirements compulsory for notified goods.

An Indian Standard can exist without being compulsory for every product covered by it. A Quality Control Order changes that position for the goods it specifies by making conformity and authorised Standard Mark use mandatory from the applicable implementation date.

Bureau of Indian Standards Act, 2016

The notification refers to Sections 16 and 17, read with Section 25(3) of the Act.

Section 16 - Compulsory Use of Standard Mark

This section empowers the Central Government to require specified goods or articles to comply with the applicable standards and carry the Standard Mark.

Such requirements may be notified in the public interest or for the other purposes specified under the Act.

Section 17 - Restrictions on Non-Compliant Products

Once a compulsory requirement becomes applicable, Section 17 restricts specified activities involving covered goods that do not meet the applicable conformity and certification requirements.

These restrictions are relevant not only to manufacturers but also to importers, distributors and sellers.

Section 25(3) - Government Action Relating to Product Quality

This provision allows the Central Government to take specified action concerning the promotion, monitoring and management of quality, including notifying goods for compulsory requirements under Section 16.

Role of DPIIT and BIS

DPIIT is the department responsible for issuing this Quality Control Order.

The Bureau of Indian Standards (BIS) has a separate role. Under Clause 3 of the Second Order, BIS is the certification and enforcement authority for the notified goods.

Manufacturers seeking certification must therefore follow the applicable BIS conformity assessment requirements.

How Scheme-I Applies

Clause 2 refers to Scheme-I of Schedule-II of the BIS (Conformity Assessment) Regulations, 2018.

This is the framework associated with product certification and authorised use of the BIS Standard Mark, commonly known as the ISI Mark.

A manufacturer's obligation is not limited to getting a product tested. The applicable licensing conditions must also be satisfied before the Standard Mark can be used.

Why Has the Government Issued the Second Quality Control Order?

The Second Order records that the Central Government considers the measure necessary or expedient in the public interest after consulting BIS.

The notification itself does not give a detailed explanation for revising the individual implementation dates.

However, the practical purpose of a Quality Control Order is clear. It establishes a mandatory conformity framework for the specified goods.

For affected businesses, this means that products have to meet the relevant Indian Standard and carry the Standard Mark under an appropriate BIS licence once the requirement applies.

The October notification also separates the compliance schedules of the two product categories. Previously, both standards were covered by the same set of implementation dates.

Under the Second Order, wrought aluminium utensils remain subject to immediate requirements, while aluminium beverage cans receive later implementation dates.

This distinction matters because a business cannot rely on the longer beverage can deadline for a different product covered by IS 1660:2024.

What Has Changed Under the Second QCO, 2026?

The main change is the implementation schedule.

DPIIT had issued the earlier Cookware, Utensils and Cans for Foods and Beverages (Quality Control) Order, 2026 through Notification S.O. 219(E), dated 15 January 2026.

That Order covered IS 1660:2024 and IS 14407:2023 and provided the same three implementation dates for both standards.

The Second Order replaces that arrangement.

Old vs New BIS Certification Deadlines

Wrought Aluminium Utensils: Earlier MSME Dates No Longer Apply

For IS 1660:2024, the Second Order states that implementation is with immediate effect across the general, small and micro enterprise categories.

The general implementation date under the January Order had already arrived on 1 October 2026.

The important change concerns small and micro enterprises. Their earlier future dates have been replaced by immediate implementation under the Second Order.

A small enterprise manufacturing covered wrought aluminium utensils should therefore not rely on the previous 1 January 2027 date.

The same applies to micro enterprises that were previously covered by the 1 April 2027 date.

Aluminium Beverage Cans: Revised Dates Extend Into 2027

Manufacturers of aluminium beverage cans covered by IS 14407:2023 have been given later deadlines.

The general implementation date is now 1 April 2027.

For small enterprises, the date is 1 July 2027, while micro enterprises have until 1 October 2027.

Each category receives an additional six months compared with the implementation dates in the January 2026 Order.

What Has Not Changed?

The Second Order continues several provisions already found in the January notification, including:

• The requirement for conformity with the applicable Indian Standard and use of the BIS Standard Mark under a licence.
• Exemption for goods manufactured domestically for export.
• Conditional treatment of qualifying existing stock.
• Exemption for certain imported goods already filled with material.
• Limited exemption for research and development imports.
• BIS's role as certification and enforcement authority.

These should not be presented as completely new exemptions.

The October Order also expressly includes a penalty clause referring to the BIS Act, 2016. The underlying statutory penalty provisions already existed under that Act.

Which Products Are Covered Under the Cookware, Utensils and Cans QCO 2026?

The title of the Order refers broadly to cookware, utensils and cans. However, its implementation table identifies two specific Indian Standards.

Businesses must examine those entries before deciding whether a product is covered.

A. Wrought Aluminium Utensils - IS 1660:2024

The first entry relates to wrought aluminium utensils.

These are aluminium products manufactured by shaping or forming the metal into the required utensil.

The relevant Indian Standard is IS 1660:2024.

BIS's product manual for this standard addresses different utensil groups, material requirements, construction, dimensions, workmanship and testing arrangements.

There is an important point concerning the product scope. The QCO table identifies Wrought Aluminium Utensils, whereas the BIS product manual for IS 1660:2024 is titled Wrought and Cast Aluminium Utensils.

Manufacturers should therefore check the specific QCO coverage before assuming that every cast aluminium product mentioned in the broader standard is automatically covered by this Order.

B. Aluminium Cans for Beverages - IS 14407:2023

The second entry concerns aluminium cans for beverages.

These products are covered by IS 14407:2023.

The standard and its BIS product manual address product characteristics such as materials, construction, dimensions, finishes and testing requirements.

Manufacturers producing beverage cans should examine the specific can types and product varieties covered by their manufacturing activities.

Which Businesses Should Check Applicability?

The Second Order should not be read as bringing every kitchen product, stainless steel utensil or food container under these two standards.

Separate notifications may regulate other product categories.

Which Indian Standards Must Manufacturers Follow?

Manufacturers need to understand the technical standard applicable to their product. The QCO identifies the standard, but it does not reproduce every technical specification.

Detailed conformity assessment depends on the relevant Indian Standard and BIS guidance.

IS 1660:2024 - Aluminium Utensils

IS 1660:2024 contains requirements relating to aluminium utensils.

The BIS product manual addresses matters such as:

• Raw Materials: Grades of aluminum material relevant to various components.
• Construction: Characteristics pertaining to product design and manufacture.
• Dimensions: Dimensions and thicknesses relevant.
• Workmanship: Product finish, surface condition and manufacturing quality.
• Testing: Applicable performance and other tests.
• Product classification: Different utensil varieties and their treatment under certification.

A manufacturer seeking BIS ISI Certification should examine the standard and product manual together.

Simply manufacturing a product from aluminium does not establish conformity with IS 1660:2024.

IS 14407:2023 - Aluminium Cans for Beverages

IS 14407:2023 sets out specifications for aluminium beverage cans.

The BIS product manual addresses:

• Material specifications.
• Types and capacities of cans.
• Dimensional requirements.
• Internal and external finishes.
• Relevant strength and performance tests.
• Sampling and testing requirements.
• Product varieties covered by certification.

Manufacturers should check the product varieties proposed for inclusion in their BIS licence.

Indian Standards Comparison

What if BIS Revises the Standard?

The Second Order states that the latest version of an Indian Standard, including amendments notified by BIS, will apply from the date of the relevant notification.

Manufacturers should not rely indefinitely on an older testing document or product specification.

Before applying for certification or reviewing an existing licence, the applicable standard version and any notified amendments should be checked.

Is BIS Certification Mandatory for Aluminium Utensils and Beverage Cans?

BIS certification is compulsory for products covered by the Second QCO once their applicable implementation date arrives, unless a valid exemption applies.

Clause 2 requires the notified goods to conform to the relevant Indian Standard and bear the Standard Mark under a licence issued by BIS.

This requirement follows Scheme-I of the BIS (Conformity Assessment) Regulations, 2018.

What Is the Difference Between BIS Certification and ISI Marking?

BIS certification is the process through which the competent authority assesses conformity under the applicable certification scheme.

The ISI Mark is the commonly used name for the BIS Standard Mark associated with Scheme-I product certification.

The two are connected, but obtaining a laboratory report is not the same as receiving permission to use the Standard Mark.

A manufacturer needs the appropriate BIS licence and must satisfy its conditions.

What Should a BIS Licence Cover?

A licence relates to a specified Indian Standard and the approved scope of products.

Manufacturers should check whether the licence covers the products they actually manufacture.

Relevant details may include:

• The Indian Standard identified in the licence.
• The authorised manufacturing location.
• The product groups or varieties included.
• Applicable licence conditions.
• Current licence validity.
• Testing and quality control arrangements.

An existing BIS licence for another product cannot automatically be used for covered aluminium utensils or beverage cans.

How to Apply for BIS ISI Certification

The exact procedure depends on the relevant BIS scheme, product standard and official guidance.

The main stages generally involve the following activities.

1. Identify the Applicable Indian Standard

The manufacturer must first establish which standard applies to the product.

An incorrect product classification can lead to a certification application that does not address the actual requirement.

2. Review the Product's Technical Requirements

The manufacturer should examine the applicable standard, product manual and testing requirements.

This helps identify whether changes to manufacturing controls or testing arrangements may be needed.

3. Prepare the BIS Application

The prescribed application information and supporting documents must be prepared according to BIS requirements.

The documents vary depending on the certification route and product.

4. Complete the Applicable Conformity Assessment

BIS assesses the application under the relevant scheme. This may involve examination of manufacturing arrangements, factory assessment and product testing, as applicable.

5. Obtain the BIS Licence

Once BIS grants the appropriate licence, the manufacturer may use the Standard Mark according to its approved scope and conditions.

Submitting an application does not itself authorise a manufacturer to use the ISI Mark.

Manufacturers unfamiliar with the application process may seek professional BIS Certification Services for guidance on the appropriate certification route and documentation.

What Are the Revised BIS Compliance Deadlines for Manufacturers and MSMEs?

The Second Order gives two very different implementation schedules.

For wrought aluminium utensils, the mandatory requirements apply with immediate effect.

For aluminium beverage cans, the deadlines depend on enterprise classification.

Revised Implementation Timeline

Immediate Implementation for Wrought Aluminium Utensils

The Second Order removes the separate future implementation dates previously available to small and micro enterprises for the notified IS 1660:2024 category.

The requirement takes effect with the commencement of the Second Order, which is tied to its publication in the Official Gazette.

Manufacturers should not assume that a previously applicable MSME deadline remains available after supersession.

Deadlines for Aluminium Beverage Cans

The later dates apply to the notified IS 14407:2023 category.

General manufacturers - 1 April 2027

This is the date for the general category, other than enterprises separately covered as small or micro enterprises.

Small enterprises - 1 July 2027

The Order provides a separate date for small enterprises as defined under the MSMED Act, 2006.

Micro enterprises - 1 October 2027

Micro enterprises receive the latest implementation date for this product category.

How Should Businesses Confirm Their MSME Category?

The notification refers to the definitions under the Micro, Small and Medium Enterprises Development Act, 2006.

Manufacturers should check their classification under the applicable legal framework.

Businesses should not rely only on how they describe themselves commercially. The relevant classification must be supported by the applicable criteria.

A medium enterprise should not assume that it qualifies for a deadline specifically provided to small or micro enterprises.

What Exemptions Are Available Under the Second QCO, 2026?

The Second Order contains several exemptions, but they do not apply to every business or every product.

Each exemption should be read with its conditions.

A. Exemption for Goods Manufactured in India for Export

The Order does not apply to goods or articles manufactured domestically for export.

This provision concerns the specified goods manufactured in India for overseas markets.

It should not be treated as a general exemption for all export-related or import-related activities.

Businesses relying on this provision should be able to support the intended export status of their goods.

B. Exemption for Qualifying Existing Stock

The notification provides limited relief for certain products manufactured or imported before the relevant implementation date.

The stock must satisfy the qualifying conditions, and a Chartered Accountant-certified declaration must be made to BIS.

A separate six-month provision governs the permitted sale, display or offer for sale of such stock.

C. Exemption for Imported Goods Already Filled With Material

The Order excludes the relevant goods or articles when imported into India filled with material in solid, liquid or gaseous form.

This makes the condition of the goods at the time of import important.

Importers should not assume that the same exemption applies to empty imported containers.

D. Research and Development Imports

Manufacturers of cookware, utensils and cans for foods and beverages may qualify for the exemption for up to 200 relevant goods or articles imported per year for R&D.

The imported products cannot be sold commercially.

The notification also requires scrap disposal and year-wise records that must be furnished to the Central Government.

Exemption Comparison Table

These exemptions do not cancel any separate legal requirements that may apply under other laws.

Can Manufacturers and Importers Sell Existing Stock After the QCO Takes Effect?

The Second Order provides a conditional opportunity to clear qualifying goods that were manufactured domestically or imported before the relevant implementation date.

This provision is particularly important for businesses holding older inventory.

However, having stock in a warehouse does not automatically qualify it for relief.

Which Stock Can Qualify?

The notification refers to goods manufactured domestically or imported before the applicable implementation date by the qualifying persons identified in the provision.

These include:

• Manufacturers already certified by BIS.
• Manufacturers who have applied to BIS for certification.
• Importers of the relevant goods or articles.

The remaining conditions of the stock provision must also be satisfied.

How Long Can Existing Stock Be Sold?

The Order permits qualifying declared stock to be sold, displayed or offered for sale for up to six months from the applicable implementation date.

Because the notification contains different implementation dates, the starting point for these six months must be determined separately for each applicable category.

Businesses should not automatically calculate the stock-clearance period from the date on which they received their goods or from the date on which the Order was signed.

Chartered Accountant Declaration

A key condition is the declaration to BIS certified by a Chartered Accountant.

The declaration concerns the qualifying stock covered by the transitional provision.

The notification itself does not set out a separate detailed filing format or a complete supporting-document checklist.

Manufacturers and importers should follow any applicable BIS instructions for the submission.

What Records Should Businesses Review?

To establish the stock position accurately, businesses should review the records relevant to their goods.

These may include:

• Manufacturing and production records.
• Import documentation.
• Purchase records.
• Stock registers and inventory statements.
• Applicable BIS licence or application details.
• Information supporting the CA-certified declaration.

This is practical record-review guidance. The individual records listed here should not all be treated as separate statutory documents expressly required by the October QCO.

What Are the Import Compliance Requirements Under the Second QCO?

Importers should not assume that the notification concerns only Indian manufacturers.

The BIS Act contains restrictions relating to covered goods, and the QCO itself recognises specific import situations.

Importers need to identify whether the imported goods fall within the notified product categories and whether any exemption applies.

Import of Covered Aluminium Utensils

For imported goods falling within the notified IS 1660:2024 category, the applicable mandatory conformity position needs to be checked before arranging commercial imports.

The immediate implementation requirement makes this particularly relevant.

Import of Aluminium Beverage Cans

The revised 2027 dates apply to the notified IS 14407:2023 category.

Importers should account for these dates when reviewing supply contracts and orders for the Indian market.

However, a future implementation date should not be mistaken for an exemption from every other applicable import requirement.

Imported Filled Containers

The Order expressly exempts goods or articles imported into India filled with solid, liquid or gaseous material.

Importers should examine whether the products meet the wording of this exemption.

The provision should not automatically be extended to empty imported beverage cans.

Research and Development Import Conditions

The R&D provision is limited and conditional.

It covers up to 200 relevant articles imported per year by qualifying manufacturers for research and development.

Four conditions deserve particular attention:

• Non-commercial use: The imported articles must not be sold commercially.
• Scrap disposal: The articles must be disposed of as scrap.
• Year-wise records: The manufacturer must maintain records of the imported articles for each year.
• Submission to Government: The records must be furnished to the Central Government.

A manufacturer using these imports for ordinary commercial sale would not satisfy the conditions of this exemption.

Foreign Manufacturer Certification

Where products made outside India require BIS Scheme-I certification for the Indian market, the relevant manufacturer may need to examine the Foreign Manufacturers Certification Scheme (FMCS).

The applicable requirements depend on the product, certification status and the terms of the QCO.

Importers working with overseas suppliers may consider BIS FMCS Certification guidance where it is relevant to their supply arrangements.

How Does the Second QCO Affect Manufacturers, Importers and MSMEs?

The impact of the Second Order depends mainly on the product manufactured and the enterprise category.

Aluminium Utensil Manufacturers

Manufacturers of covered wrought aluminium utensils face the most immediate compliance position under the Second Order.

The earlier future dates for small and micro enterprises have been replaced by immediate implementation.

• Businesses should examine:
• Whether the product falls within the notified IS 1660:2024 category.
• Whether an appropriate BIS licence is available.
• Whether the relevant products are covered by the licence.
• Whether the manufacturing and testing arrangements meet the applicable requirements.
• Whether any existing stock qualifies for transitional treatment.

The main issue is not simply completing an application. The business must understand the requirement that applies to its actual manufactured products.

Aluminium Beverage Can Manufacturers

For manufacturers covered by IS 14407:2023, the revised dates allow additional preparation time.

Businesses that are not yet certified can use this time to review technical requirements, assess factory readiness and plan the applicable certification process.

Manufacturers with several can varieties should also check which products would fall within the proposed BIS licence scope.

Waiting until the implementation date to begin reviewing certification requirements may create avoidable operational difficulties.

Micro and Small Enterprises

The treatment of MSMEs is particularly important because the two standards now have different schedules.

Small and micro enterprises covered by IS 1660:2024 do not have separate future implementation dates under the Second Order.

For aluminium beverage cans, the dates remain staggered.

Correct enterprise classification is therefore necessary before deciding the relevant compliance position.

Importers and Supply Chain Businesses

Importers should review the products they source and the certification arrangements of their suppliers.

They should also distinguish between commercial imports and the specific exemptions for filled goods, existing stock and qualifying R&D articles.

Businesses involved in distribution and retail should pay attention to the restrictions under the BIS Act once compulsory requirements become applicable.

What About Compliance Costs?

Certification-related expenditure may involve application charges, testing, factory arrangements and other costs under the relevant BIS framework.

The October Order does not specify one fixed certification fee or a total compliance cost for affected manufacturers.

The amount depends on the applicable certification procedure and the business's actual requirements.

Manufacturers should obtain a cost assessment relevant to their product and application rather than relying on a general figure.

What Are the Penalties for Non-Compliance With the QCO?

Clause 3 of the Second Order appoints BIS as the certification and enforcement authority.

Clause 4 states that contraventions of the Order are punishable under the BIS Act, 2016.

The Order does not prescribe a separate schedule of fines. The applicable statutory provisions must therefore be examined.

Penalties Under Section 29 of the BIS Act, 2016

Section 29(3) deals with contraventions of Section 17.

The penalties provided under this provision include the following.

These figures describe statutory penalties. They are not automatic charges imposed whenever a certification application is delayed.

The exact consequences depend on the established contravention and the applicable legal process.

Can BIS Inspect or Seize Products?

Sections 27 and 28 of the BIS Act provide relevant inspection, search and seizure powers, subject to statutory requirements.

These provisions allow authorised officers to examine matters involving suspected non-compliance in the circumstances specified by law.

Businesses should also recognise that non-compliant stock can lead to wider operational problems, including difficulties with sale and distribution.

Those commercial consequences are distinct from penalties expressly imposed under the Act.

What Should Manufacturers and Importers Do Next?

The best starting point is a product-wise review. Businesses should avoid assuming that the same deadline applies to every utensil or beverage container they manufacture.

Step 1: Check the Product Category

Start with the actual goods manufactured or imported.

Determine whether the notified Indian Standard applies.

Where the product scope is unclear, obtain clarification rather than relying only on the broad title of the Quality Control Order.

Step 2: Identify the Correct Deadline

After confirming the product category, check the relevant implementation date.

For IS 14407:2023, the enterprise classification also affects the date.

Step 3: Review Existing BIS Certification

Check whether the manufacturer has a valid and appropriate BIS licence.

Where the business already holds a licence, confirm that it covers the relevant products.

Step 4: Examine Product Testing and Quality Requirements

Review the applicable Indian Standard and BIS product manual.

Identify any gap in manufacturing controls, testing arrangements or product documentation.

Step 5: Assess Existing Stock

Check whether any stock was manufactured or imported before the applicable implementation date.

If the business intends to rely on transitional relief, examine the prescribed conditions and declaration requirements.

Step 6: Check the Available Exemptions

Businesses dealing with exports, filled imported goods or R&D imports should examine the specific exemption that may apply.

The exemption conditions should be assessed separately from the general certification requirement.

Step 7: Review Documentation

Maintain the records expressly required by the applicable provisions.

Also preserve supporting evidence that may be useful during certification, stock verification or compliance review.

Step 8: Follow Official BIS Updates

Monitor relevant amendments to the Indian Standards, QCO clarifications and certification guidance.

Changes to the applicable standard may affect compliance even after a licence has been issued.

BIS Compliance Checklist

This checklist supports internal compliance planning. It does not replace the legal requirements or any official BIS application instructions.

How Corpseed Can Help With BIS Certification

The Second Quality Control Order makes correct product classification and certification planning particularly important for aluminium utensil and beverage can manufacturers.

Businesses may need assistance in identifying the applicable standard, checking certification requirements and preparing relevant documentation.

Corpseed offers BIS Certification Services and related product compliance assistance for manufacturers and businesses dealing with regulated products.

1. BIS Applicability Assessment

The first task is to identify whether the product falls within a compulsory certification requirement.

This helps businesses determine which standard, certification route and implementation date need to be examined.

2. BIS ISI Certification Assistance

For products subject to Scheme-I requirements, Corpseed can assist businesses with understanding the applicable BIS ISI Certification process.

This may include guidance on certification requirements and relevant application documentation.

3. BIS Licence Application Support

Manufacturers preparing for a BIS licence may require assistance in organising product information, understanding procedural requirements and preparing the application.

The final licence decision remains with BIS.

4. Product Testing and Compliance Guidance

Businesses can seek guidance on the relevant Indian Standards and conformity assessment requirements.

Where product testing is required, the applicable BIS procedures and laboratory requirements must be followed.

5. BIS Certification for Foreign Manufacturers

Overseas manufacturers supplying products to India may need to examine the relevant FMCS requirements.

Corpseed provides assistance relating to BIS FMCS Registration, where applicable.

6. Compliance Review for Manufacturers and Importers

Companies may also find help for the following aspects during evaluation:

• Product applicability
• Implementation deadlines
• Certification
• Applicable exemptions
• Supporting documents
• Regulatory compliance planning

Need help with BIS Certification Services for aluminium utensils or beverage cans? Contact Corpseed for assistance in understanding the applicable certification requirements and preparing the relevant compliance documentation.

Key Takeaways

Cookware, Utensils and Cans for Foods and Beverages (Quality Control) Second Order, 2026 has revised the compliance period of the BIS notification for two categories of products made of aluminum.

Wrought aluminum utensils covered under IS 1660:2024 shall apply from the date of notification, even to micro and small units.

Aluminium beverage cans covered by IS 14407:2023 have later implementation dates: 1 April 2027 for the general category, 1 July 2027 for small enterprises and 1 October 2027 for micro enterprises.

The Order also retains conditional exemptions for domestically manufactured export goods, qualifying existing stock, filled imported goods and limited R&D imports.

Manufacturers and importers should review their product classification, BIS licence status and applicable implementation date before making supply or certification decisions.