BIS Establishes Eight New and Revised Indian Standards in 2026: Complete Compliance and Business Guide

The Bureau of Indian Standards has established eight Indian Standards covering electrical appliances, network access security, metadata registries, and the C++ programming language.

All eight standards were established on 24 July 2026. Four of them replace previous editions that will remain valid concurrently until 24 January 2027. For the other four standards, the notification does not identify a previous Indian Standard for withdrawal.

For manufacturers, importers and technology businesses, the notification raises an obvious question: does the establishment of these standards make BIS certification immediately mandatory?

The short answer is no-not by this notification alone.

Establishing an Indian Standard and making it compulsory are two distinct regulatory actions. A separate Quality Control Order, legislation, government direction, certification condition, tender or contract may be required to make compliance mandatory.

Therefore, businesses should not rush into a BIS licence application without first determining:

• Whether the standard applies to their product or activity,
• Whether a separate law or Quality Control Order makes it mandatory,
• Which edition must be followed,
• Whether testing or certification is required,
• Whether an existing licence or test report needs updating.

This compliance update explains the eight standards, implementation dates, business impact, the BIS certification process, potential costs, and the steps organisations should take before the older editions are withdrawn.

Key Highlights of the BIS Notification

The most important takeaways are:

• Eight Indian Standards were established on 24 July 2026.
• Five standards pertain to the safety of household or commercial electrical appliances.
• Three standards relate to network security, metadata and software.
• Four standards replace earlier editions.
• The four previous editions remain valid until 24 January 2027.
• Four standards have no predecessor identified for withdrawal.
• The notification does not, by itself, impose blanket BIS certification.
• Businesses must separately check QCO, regulatory, contractual and procurement requirements.
• Companies using an older edition should begin their transition assessment immediately.

Background of the BIS Standards Framework

The Bureau of Indian Standards, or BIS, is India's national standards body, responsible for establishing, revising, amending, and withdrawing Indian Standards for goods, articles, processes, systems, and services.

Indian Standards provide common benchmarks for areas such as:

• Product safety,
• Performance,
• Quality,
• Testing,
• Marking,
• Terminology,
• Interoperability,
• Information management,
• Technical procurement.

BIS can formulate an Indian Standard domestically or adopt a standard developed by an international organisation. This explains why several standards in the notification reference IEC, ISO, or IEEE publications.

Legal Basis of the Notification

The notification was issued under Rule 15 of the Bureau of Indian Standards Rules, 2018.

Rule 15 empowers BIS to establish Indian Standards and to reaffirm, amend, revise or withdraw them when required. The process normally involves consultation with technical experts, government bodies, industry representatives, laboratories, consumers and other stakeholders.

The establishment, revision and withdrawal of Indian Standards are formally notified through the Official Gazette.

Which Standards Have Been Established?

Scope of the Notification

The standards can be divided into two broad categories.

Electrical-Appliance Safety

The first five standards form part of the IS 302 series, which covers the safety of household and similar electrical appliances.

These standards may be relevant to:

• Electrical-appliance manufacturers,
• Commercial-kitchen equipment companies,
• Domestic appliance brands,
• Importers,
• Foreign manufacturers,
• Distributors,
• Testing laboratories,
• Hotels and restaurants,
• Hospitals and institutional kitchens,
• Government and private procurement agencies.

Information Technology and Software

The remaining three standards relate to:

• Port-based network access control,
• Metadata registry registration, and
• The C++ programming language.
• These standards may be relevant to:
• Network-equipment manufacturers,
• Cybersecurity service providers,
• System integrators,
• Government IT departments,
• Data-governance teams,
• Software companies,
• Compiler developers,
• Embedded-system manufacturers,
• Technology procurement teams.

The compliance implications are different for each group. An electrical product may be subject to product testing and certification if covered by a mandatory order. An IT or software standard may instead become relevant through procurement, contracts, technical policies, or voluntary adoption.

Detailed Explanation of the Eight Standards

1. IS 302 (Part 2/Sec 16): 2026-Food Waste Disposers

This standard is based on IEC 60335-2-16: 2022 and relates to the safety of electrically operated food waste disposers.

Food waste disposers are typically installed in kitchen sink systems and are designed to break down food waste before disposal.

The Gazette does not list an earlier Indian Standard for withdrawal. Businesses should therefore describe it as a standard for which no predecessor is identified in this notification. It should not be claimed that no other safety requirement was previously relevant to these appliances.

Who Should Review This Standard?

• Food waste disposer manufacturers,
• Kitchen-appliance brands,
• Modular-kitchen businesses,
• Importers and distributors,
• Hotels and restaurants,
• Builders and institutional buyers,
• Product testing laboratories.

Manufacturers and importers should first compare the product's intended use, design and electrical specifications with the precise scope of the complete standard.

They should then check whether a QCO, certification scheme, tender or customer contract makes conformity compulsory.

2. IS 302 (Part 2/Sec 26): 2026-Electrical Clocks

This standard is based on IEC 60335-2-26: 2024 and specifies particular safety requirements for electrical clocks.

It is the second revision and replaces IS 302-2-26: 2014. However, the previous edition will remain valid until 24 January 2027.

Manufacturers should analyze:

• Models tested in accordance with the 2014 version,
• Any BIS license that is in place, as applicable,
• Test reports,
• Product drawings,
• Critical parts,
• Markings and instructions for users,
• Applications pending,
• Specification of suppliers.

The notification is not a summary of the technical differences between the 2014 and 2026 versions. The assessment of the transition will require a clause-by-clause comparison of all standards.

3. IS 302 (Part 2/Sec 36): 2026-Commercial Electric Cooking Appliances

This standard is based on IEC 60335-2-36: 2021. It covers commercial electric cooking ranges, ovens, hobs and hob elements.

The standard may be relevant to equipment used in:

• Hotels,
• Restaurants,
• Canteens,
• Hospitals,
• Cloud kitchens,
• Catering facilities,
• Institutional kitchens,
• Food-service businesses.

No predecessor Indian Standard is identified for withdrawal in the notification.

Commercial appliances can differ from ordinary household appliances in their intended use, operating environment, capacity and frequency of operation. A company should not classify a product solely by the words "oven" or "hob." The complete scope and definitions must be reviewed before beginning the BIS certification process.

4. IS 302 (Part 2/Sec 49): 2026-Appliances for Keeping Food and Crockery Warm

This standard is based on IEC 60335-2-49: 2021. It concerns commercial electrical appliances used for keeping food or crockery warm.

The standard may be relevant to manufacturers and suppliers serving:

• Restaurants,
• Hotels,
• Buffets,
• Hospitals,
• Catering businesses,
• Commercial cafeterias,
• Institutional kitchens.

No previous Indian Standard is listed for withdrawal.

Manufacturers should examine the product's commercial purpose, heating method, electrical characteristics and intended operating conditions before deciding that the standard applies.

Institutional purchasers may also begin referring to this standard in procurement documents even where no independent QCO makes it mandatory.

5. IS 302 (Part 2/Sec 54): 2026-Liquid- and Steam-Based Surface Cleaners

This standard is based on IEC 60335-2-54: 2022 and covers household surface-cleaning appliances that use liquids or steam.

The exact scope must be checked before classifying steam cleaners, liquid-based cleaners, or multipurpose cleaning equipment under this standard.

Possible impacted industries:

• Manufacturers of cleaning appliances,
• Brands of consumer electronics,
• Importers,
• Foreign manufacturers,
• Distributors,
• Online retailers,
• Product-testing labs.

Importers need to conduct a BIS applicability study before placing a large purchase order or delivering products to India. Finding out that there is a mandatory compliance requirement after delivery could result in storage costs, delayed launches, and retesting.

6. IS/ISO/IEC/IEEE 8802-1X: 2021-Port-Based Network Access Control

This standard concerns port-based network access control for local and metropolitan area networks.

It replaces the 2013 edition, which is scheduled for withdrawal on 24 January 2027.

Port-based network access control helps organisations manage how devices and users obtain access to network infrastructure. The standard may be relevant to:

• Network-equipment manufacturers,
• Enterprise security teams,
• Cybersecurity companies,
• System integration firms,
• Managed services providers,
• IT Projects by Government,
• Operators of Critical Infrastructure.

Companies relying on the old version must carefully examine contracts, technical designs, procurement requirements, and product documentation.

The notification does not require every organisation to redesign its network. Applicability may arise through customer requirements, security policies, contracts or public procurement.

7. IS/ISO/IEC 11179-6: 2023-Metadata Registry Registration

This standard deals with the registration of metadata in a metadata registry.

It replaces the 2015 edition, which will remain valid until 24 January 2027.

Metadata registries help organisations maintain structured information about data elements. They may support:

• Data governance,
• Common definitions,
• Information exchange,
• Data interoperability,
• Institutional record management,
• Standardised data dictionaries.

The standard may be relevant to government departments, financial institutions, healthcare organisations, digital platforms and large enterprises.

Organisations using the previous edition should review their registration procedures, governance roles, metadata status models, approval mechanisms and related software requirements.

8. IS/ISO/IEC 14882: 2024-C++ Programming Language

This standard relates to the C++ programming language and replaces the 2020 edition.

The earlier edition will remain valid until 24 January 2027.

The standard may be relevant to:

• Software developers,
• Compiler vendors,
• Embedded-system manufacturers,
• Automotive technology companies,
• Industrial software companies,
• Government technology projects,
• Organisations procuring safety-critical software.

Its establishment does not mean that every developer using C++ must obtain BIS registration or certification.

Its relevance is more likely to arise through compiler conformity, coding policies, technical contracts, procurement requirements, software development standards, or migration to newer C++ capabilities.

What Has Changed?

The notification creates three broad changes.

Four Standards Have No Predecessor Listed

No previous Indian Standard is identified for withdrawal for:

• Food waste disposers,
• Commercial electric cooking ranges, ovens and hobs,
• Commercial food- and crockery-warming appliances,
• Household liquid- or steam-based surface-cleaning appliances.

This does not necessarily mean that these products were completely unregulated earlier. Another general safety standard, QCO certification condition, or sector-specific requirement may still be relevant.

Four Standards Replace Previous Editions

Older editions have been replaced for:

• Electrical clocks,
• Network access control,
• Metadata registry registration,
• C++ programming language.

These previous editions remain concurrently valid until 24 January 2027.

Greater Alignment With International Standards

The notification adopts the latest editions of IEC, ISO, and IEEE as Indian Standards.

This can help align Indian technical practices with more recent international requirements. However, businesses must use the complete Indian editions when determining domestic compliance.

What the Notification Does Not Tell Businesses

The Gazette identifies the standards, establishment dates, previous editions, and withdrawal dates. It does not provide:

• Complete technical requirements,
• Clause-by-clause changes,
• Product testing methods,
• Certification procedures,
• BIS licence fees,
• Factory-inspection requirements,
• Penalties for every affected business,
• Automatic confirmation that certification is mandatory.

These questions require review of the complete standard and the applicable regulatory instrument.

Implementation Timeline and Transition Norms

What Does Concurrent Running Mean?

Concurrent running allows two editions of an Indian Standard to remain valid for a specified period.

Rule 28 of the Bureau of Indian Standards Rules, 2018 permits the Director General of BIS to allow concurrent operation of two versions and determine the transition period.

Businesses should use this period for orderly migration. It should not be treated as a reason to wait until January 2027.

What About Products Already in the Market?

The notification does not provide a universal answer for products manufactured, tested, certified, or imported under an earlier edition.

Businesses must separately check:

• Applicable BIS implementation guidelines,
• Existing licence conditions,
• QCO provisions,
• Acceptance of old test reports,
• Treatment of products already manufactured,
• Pending BIS applications,
• Existing inventory,
• Contractual obligations.

Why Were These Standards Implemented?

The notification does not provide a detailed policy explanation for each standard. However, the updates appear consistent with recognised standardisation objectives.

Updating Electrical-Safety Benchmarks

Electrical appliances and their components continue to evolve. Updated standards can provide more current benchmarks for design, construction, testing and safe use.

Aligning India With International Standards

The use of newer IEC, ISO and IEEE editions can reduce differences between Indian and international technical practices.

This may help manufacturers operating in multiple markets, although Indian regulatory and certification requirements must still be assessed separately.

Improving Network Security

The network-access-control standard provides an updated technical reference for controlling access to local and metropolitan networks.

Strengthening Data Governance

The metadata-registry standard can support consistent data definitions, registration procedures and information exchange.

Updating Software Specifications

The new C++ edition provides a more up-to-date reference for developers, compiler vendors and organisations that specify C++ requirements in contracts or procurement.

Impact on Businesses

Impact on Manufacturers

Manufacturers may need to review product designs, components, drawings, technical files, quality-control plans, testing capabilities, and existing certifications.

Where the new edition contains materially different requirements, the manufacturer may need to:

• Modify product construction,
• Replace critical components,
• Update testing equipment,
• Conduct additional testing,
• Revise user instructions,
• Update product marking,
• Amend supplier specifications,
• Extend or change an existing licence.

The actual changes cannot be confirmed from the Gazette alone.

Impact on Importers

Importers should check product compliance before placing orders or arranging shipment.

A delayed regulatory assessment may result in:

• Shipment delays,
• Additional warehousing costs,
• Product testing after manufacture,
• Re-labelling,
• Supplier disputes,
• Delayed market launch,
• Certification expenses not included in the original budget.

The manufacturer, rather than the importer, may need to hold the BIS licence under certain product-certification schemes. The correct applicant must be identified before filing.

Impact on Foreign Manufacturers

BIS certification for foreign manufacturers may involve additional documentation and coordination.

Depending on the applicable scheme, the process may require:

• Appointment of an authorised Indian representative,
• Overseas-factory information,
• Product testing,
• Factory inspection,
• Travel and inspection expenditure,
• Brand authorisation,
• Ongoing representation in India.

Foreign manufacturers should begin the process well before the planned Indian launch date.

Impact on MSMEs

Micro and small businesses may face a proportionately greater burden because they may not have:

• An in-house compliance department,
• Complete testing infrastructure,
• Dedicated regulatory personnel,
• Experience with BIS applications,
• Sufficient budget for repeated testing,
• Easy access to specialised laboratories.

An early gap analysis can help an MSME avoid unnecessary product modifications and incorrect applications.

Impact on Hotels, Restaurants and Institutional Buyers

Hotels, hospitals, restaurants, canteens and commercial kitchens may be affected through procurement.

Buyers may begin asking suppliers for:

• Updated conformity evidence,
• Valid BIS licences, where applicable,
• Test reports,
• Product-safety declarations,
• Confirmation of the relevant Indian Standard,
• Technical specifications aligned with the new edition.

Impact on Technology Companies

Technology businesses may need to review:

• Network-security architecture,
• IT procurement documents,
• Customer contracts,
• Metadata-governance procedures,
• Data dictionaries,
• Compiler support,
• Coding standards,
• Toolchain policies,
• Software migration plans.

How Businesses Can Achieve Compliance

A business should approach the notification through a structured process.

Step 1: Complete an Applicability Assessment

The business should begin with the product's:

• Intended use,
• Technical design,
• Electrical rating,
• User category,
• Operating environment,
• Manufacturing process,
• Commercial description.

Similar products may fall under different standards. Choosing a standard based only on a product name can result in an incorrect BIS licence application.

Step 2: Verify Mandatory Status

Search for:

• Quality Control Orders,
• Product-specific BIS certification manuals,
• Regulatory notifications,
• Applicable conformity-assessment schemes,
• Tender requirements,
• Customer contracts,
• Sector-specific directions.

This is one of the most important functions of a BIS certification consultant.

Step 3: Obtain the Complete Standard

The Gazette is only a notification. It cannot be used as a replacement for the complete technical standard.

The complete standard must be reviewed for:

• Scope,
• Definitions,
• Classifications,
• Construction requirements,
• Safety requirements,
• Test methods,
• Marking,
• Documentation,
• Referenced standards.

Step 4: Conduct a Gap Analysis

For the updated standards, enterprises need to conduct a clause-by-clause comparison between the old and updated editions.

Gap analysis will help determine:

• New requirements,
• New tests,
• New definitions,
• New classification,
• New references,
• Product design considerations,
• Changes in documentation,
• Requirement for retesting.

Step 5: Prepare Technical Documentation

Documents may include:

• Process chart for manufacturing,
• Factory layout,
• List of machinery,
• Testing equipment list,
• Calibration certificates,
• Drawings of products,
• Bills of material,
• Component specifications,
• Ratings of product,
• Product models,
• Quality control plan,
• Test reports,
• Trademark documents.

The final document list depends on the product and BIS scheme.

Step 6: Complete Product Testing

Where testing is required, the business should verify:

• Laboratory recognition or acceptance,
• Testing scope,
• Sample quantity,
• Testing duration,
• Test charges,
• Report validity,
• Model-grouping rules,
• Retesting conditions.

Choosing the wrong BIS testing laboratory can lead to an unusable report and repeated expenditure.

Step 7: Submit the BIS Licence Application

A complete application should correctly identify:

• Manufacturer,
• Manufacturing unit,
• Product category,
• Indian Standard,
• Product models,
• Brand,
• Applicable certification scheme,
• Test reports,
• Authorised representatives.

Incomplete or inconsistent information can delay the BIS certification process.

Step 8: Prepare for Factory Inspection

Where factory inspection is required, the manufacturer should ensure that:

• Production facilities are operational,
• Testing equipment is available,
• Calibration certificates are valid,
• Quality-control procedures are implemented,
• Technical personnel are present,
• Records are properly maintained,
• Product samples can be drawn.

Step 9: Update Product Marking

The BIS Standard Mark must only be used under a valid licence and within its approved scope.

Product marking may need to include:

• Licence number,
• Product identification,
• Model,
• Rating,
• Traceability information,
• Applicable statutory declarations,
• User and safety instructions.

Step 10: Maintain Post-Certification Compliance

BIS compliance continues after the licence is granted.

Manufacturers may need to maintain:

• Routine test records,
• Calibration,
• Quality-control records,
• Supplier controls,
• Complaint records,
• Correct use of the Standard Mark,
• Surveillance readiness,
• Renewal documents,
• Change notifications,
• Compliance with later amendments.

BIS Certification Cost

There is no single BIS certification cost for every product.

The total cost depends on the standard, product, certification scheme, testing requirements, and location of the manufacturing unit.

Businesses should request a product-specific quotation rather than relying on a generic BIS certification cost displayed online.

A basic quotation may not include:

• Government fees,
• Laboratory charges,
• Factory inspection,
• Travel expenses,
• Sample shipment,
• Product redesign,
• Retesting,
• Additional model coverage,
• Marking fees,
• Post-certification support.

Risks of Ignoring the Updated Standards

Even where a standard is not independently mandatory, ignoring it may create commercial or contractual risks.

These can include:

• Rejection from government or private tenders,
• Failure to meet customer specifications,
• Use of an outdated technical reference,
• Rejection of test reports,
• Delayed BIS certification,
• Repeat testing,
• Product redesign after launch,
• Supplier disputes,
• Loss of customer confidence,
• Network-security weaknesses,
• Inconsistent metadata governance,
• Software compatibility issues.

Where a separate QCO makes certification mandatory, non-compliance may also lead to enforcement under the applicable order and the BIS Act.

The penalties should be linked to the mandatory instrument, not incorrectly attributed solely to this standards-establishment notification.

Benefits for Businesses

Improved Product Safety

Updated electrical appliance standards can support safer product design, manufacturing, and testing.

Greater International Alignment

International coordination will help reduce the gap between the technical procedures followed in India and those defined internationally by the latest IEC, ISO, and IEEE standards.

Better Market Credibility

Conformity with recognised standards can improve confidence among customers, institutional buyers, and business partners.

Clearer Procurement

Standards make it possible for buyers to quantify specifications of products/systems/suppliers.

Reduced Product Failure Risk

Effective testing and quality control can reduce defects, complaints, recalls, and corrective action expenses.

Stronger Network Security

The port-based network access control standard can support more consistent authentication and access management practices.

Improved Data Governance

The metadata-registry standard can help organisations maintain consistent definitions and registration processes.

Updated Software Practices

The newer C++ standard provides a current reference for compilers, development policies, contracts and procurement.

Is This the Right Decision or an Additional Burden?

The notification represents necessary technical modernisation, but it may also create short-term costs.

Why the Decision Is Beneficial

The updated standards can:

• Replace outdated technical references,
• Increase product safety,
• Align internationally,
• Improve procurement processes,
• Ensure consistent testing,
• Improve network security,
• Support better data governance,
• Modernise software specifications.

Why Businesses May See It as a Burden

Businesses may need to spend money on:

• Purchasing the new standards,
• Technical interpretation,
• Product redesign,
• Laboratory testing,
• Retesting,
• BIS certification,
• Documentation,
• Supplier changes,
• Staff training,
• Software migration.

The burden may be greater for MSMEs, foreign manufacturers, and companies with several products or manufacturing units.

Balanced Assessment

The new standards will be beneficial, as technical requirements change with evolving products and technologies.

However, successful implementation depends on:

• Clear BIS transition guidelines,
• Adequate laboratory capacity,
• Reasonable certification timelines,
• Support for MSMEs,
• Transparent cost structures,
• Clarity on mandatory applicability.

The standards themselves are not the main problem. The burden arises when businesses do not know whether a standard is mandatory, which edition applies, or what must be done with existing products and certificates.

Business Opportunities Created

The notification can create new commercial opportunities across compliance, engineering, and technology services.

BIS Certification and Product Compliance Services

Manufacturers and importers may need help with:

• Product classification,
• Standard selection,
• QCO applicability,
• BIS licence applications,
• Documentation,
• Testing,
• Inspection preparation,
• Post-certification compliance.

Testing-Laboratory Services

Testing laboratories may see increased demand for product evaluation under the new electrical-appliance standards.

Product Redesign and Safety Engineering

Manufacturers that are now opting for newer standards may require support with components, construction, technical drawings, and safety assessments.

Foreign-Manufacturer Compliance Services

International brands entering India may need assistance with BIS certification, local representation, testing, and factory inspections.

Cybersecurity Consulting

The network-access-control standard may create opportunities for:

• Network-security consultants,
• Authentication solution providers,
• System integrators,
• Security auditors,
• Managed service providers.

Metadata and Data-Governance Services

Organizations could seek help with their metadata registries, data dictionaries, governance procedures, and digital transformation projects.

C++ Training and Migrations

Software firms might need:

• Developer training,
• Compiler migration,
• Codebase analysis,
• Toolchain validation,
• Compatibility testing,
• Coding policy updates.

Compliance Technology Platforms

Businesses with several products may invest in software for:

• Certificate tracking,
• Regulatory monitoring,
• Test-report management,
• Supplier compliance,
• Product-model mapping,
• Renewal reminders.

How Can Corpseed Help?

The most difficult part of a BIS compliance update is not reading the standard's name. It is determining whether that standard applies to a specific product and what the business must do next.

Corpseed can support manufacturers, importers, startups, and foreign companies through the following services.

Product and Standard Applicability Assessment

Corpseed can analyze the product description, specifications, purpose, and manufacturing process to determine which Indian Standard applies.

This reduces the risk of choosing the wrong standard or submitting an unnecessary application.

QCO and Mandatory-Status Assessment

Before beginning certification, Corpseed can help determine whether the standard is:

Voluntary,

Covered by a QCO,

Required by another regulation,

Included in a tender,

Contractually mandatory.

BIS Certification Support

Where certification is required, Corpseed can assist with:

Document checklists,

Application preparation,

Online filing coordination,

Response to application queries,

Inspection preparation,

Application tracking,

Post-certification requirements.

BIS Testing Laboratory Coordination

Corpseed can help businesses understand the required tests, sample requirements, and appropriate laboratory route.

Final laboratory selection must be based on the relevant standard, testing scope, and applicable BIS requirements.

Transition Gap Analysis

Businesses using a previous edition can be supported in comparing their existing products, reports, and documentation with the updated standard.

This can help create a structured transition plan before 24 January 2027.

Support for Foreign Manufacturers and Importers

Assistance may include:

India-specific regulatory mapping,

Identification of applicant,

Authorised Indian representative (AIR) requirements,

Documentation,

Testing coordination,

Factory-inspection preparation,

Application support.

Compliance Documentation

Corpseed can help organise:

Product documents,

Factory details,

Testing records,

Quality-control procedures,

Brand authorisations,

Technical declarations,

Application forms.

Regulatory Monitoring

Future amendments, Quality Control Orders and implementation guidelines can change a business's obligations.

Ongoing monitoring helps manufacturers and importers act before a deadline disrupts production, imports or sales.

Corpseed can support the application and compliance process, but testing outcomes and licence approval remain subject to BIS requirements and the decision of the competent authority.